Altronix WAYPOINT10AU, WAYPOINT10A8DU, WAYPOINT10A8U, WAYPOINT10A4DU, WAYPOINT10A4U Installation Guide

WayPoint10A Series

AC Outdoor Power Supplies

Installation Guide

Models Include:

WayPoint10AU

- 24VAC @ 4A and/or 28VAC @ 3.5A.

- Two (2) fuse protected outputs.

WayPoint10A4U

- 24VAC @ 4A or 28VAC @ 3.5A.

- Four (4) fuse protected outputs.

WayPoint10A8U

- 24VAC @ 4A or 28VAC @ 3.5A.

- Eight (8) fuse protected outputs.

Rev. 091514-10A

WayPoint10ADU

- 24VAC @ 4A and/or 28VAC @ 3.5A.

- Two (2) PTC protected outputs.

WayPoint10A4DU

- 24VAC @ 4A or 28VAC @ 3.5A.

- Four (4) PTC protected outputs.

WayPoint10A8DU

- 24VAC @ 4A or 28VAC @ 3.5A.

- Eight (8) PTC protected outputs.

More than just power.

TM

Altronix WayPoint Outdoor Power Supplies provide 24VAC and/or 28VAC distributed via two (2), four (4) or

PD2WP

COM 24V 28V

COM 24V 28V

28V 24V COM

Input Voltage

Power Input

115V

115

230

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN, NY 11220

Circuit board incorporated

in WayPoint10ADU (PTCs)

eight (8) outputs for powering CCTV cameras, heaters, and other video accessories.

WayPoint10A Series AC Reference Chart:

Overview:

Altronix
Model Number

WayPoint10AU

WayPoint10ADU

WayPoint10A4U

WayPoint10A4DU

WayPoint10A8U

WayPoint10A8DU

*Lower rated fuses can be used.

Output Voltage

24VAC and 28VAC 3.5A 1 of each

24VAC and 28VAC 3.5A 1 of each

Total

Output
Current
(Power)

24VAC 4A

24VAC 4A

24VAC 4A

28VAC 3.5A

24VAC 4A

28VAC 3.5A

24VAC 4A

28VAC 3.5A

24VAC 4A

28VAC 3.5A

Number

and Type

of Outputs

4 Fused

4 PTCs – 2.5A 4.8kg

8 Fused

8 PTCs – 2.5A 4.95kg

Fuse
Output
Ratings

1

5A/

32V*

1

– 2.5A 4.68kg28VAC 3.5A

5A/

32V*

5A/

32V*

Input Current Draw

PTC

Output

115VAC

Ratings

60Hz

–

1.0A 0.5A

– 4.8kg

– 4.95kg

230VAC

50Hz

Product

Weight

4.68kg28VAC 3.5A

Specifications:

Agency Listings:

• UL/cUL Listed:
UL 60950-1 Information Technology Equipment.
UL 60950-22 Equipment to be Installed Outdoors.

• CE European Conformity.

Input:

• Input: 115VAC, 60Hz,1A or 230VAC, 50Hz, 0.5A.

Output:

• Output options:
a. 24VAC or 28VAC.
b. Both 24VAC and 28VAC
(WayPoint10AU/ADU only).

• Fuse ratings:
WayPoint10A Series incorporate 5A/32V fuses.

Visual Indicators:

• Individual power output LED indicators.

• Illuminated master power switch.

Features:

• Surge suppression.

• Spare fuses included.

Accessories:

• Optional PMK1 Pole Mount Kit simplifies
installation of outdoor units.

Enclosure:

• NEMA 4/4X, IP66-11 Rated enclosure for
outdoor use.

• Enclosure Dimensions (H x W x D approx.):

13.31” x 11.31” x 5.59”
(338.1 mm x 287.3 mm x 142 mm).

Installation Instructions:

Unit shall be installed in accordance with The National Electrical Code and all applicable Local Regulations.

1. Remove backplane from enclosure prior to mounting (do not discard hardware).

2. Mark and drill desired inlets on the enclosure to facilitate wiring (Fig. 1, pg. 4).
Note: Inlets for conduit fittings should only be made on the bottom of the enclosure.
UL Listed NEMA type 4X rated conduit connector/hubs shall be used for the appropriate size inlets.

3. Mount unit in desired location. Mark and drill holes to line up with the top and bottom holes of the
enclosure flange. Secure enclosure with appropriate fasteners (Fig. 5, pg. 7 and Fig. 11, pg. 8).

4. Mount back plane to enclosure with hardware.

5. Set the input voltage selector switch for 115VAC or 230VAC operation (Figs. 2-4, pgs. 4-6)

6. To facilitate wire entry utilize weather-tight NEMA 4 rated connectors, bushings, and cable.

7. Set illuminated master power disconnect circuit breaker to the [OFF] position (Figs. 2-4, pgs. 4-6).

8. Connect unswitched AC power (115VAC/230VAC, 50/60 Hz) to terminals marked [L, N]
(Figs. 2-4, pgs. 4-6). Green branch wire connects to earth (safety) ground lug .
Wire gauge range of connectors is 14 AWG to 11 AWG (1.6 mm to 2.5 mm diameter).

9. Set illuminated master power disconnect circuit breaker to the [RESET/ON] position (Figs. 2-4, pgs. 4-6).

- 2 - WayPoint10A Series

10. WayPoint10A4U/A4DU, WayPoint10A8U/A8DU are factory set for 24VAC operation.
For 28VAC operation adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].

11. Measure output voltage on terminals marked [COM, 24V, 28V] on WayPoint10AU or WayPoint10ADU
(Fig. 2, pg. 4) or [1-4] or [1-8 COM] on WayPoint10A4U, WayPoint10A4DU, WayPoint10A8U and
WayPoint10A8DU before connecting devices (Fig. 3, pg. 5, Fig. 4, pg. 6).
This helps avoiding potential damage.

12. Set illuminated master power disconnect circuit breaker to the [OFF] position (Figs. 2-4, pgs. 4-6).

13. Connecting devices to WayPoint10AU or WayPoint10ADU:
For 24VAC output connect devices to terminals marked [COM, 24V] (Fig. 2, pg. 4).
For 28VAC output connect devices to terminals marked [COM, 28V] (Fig. 2, pg. 4).
Connecting devices to WayPoint10A4U or WayPoint10A4DU:
Connect device to terminals marked [1-4] and [COM] (Fig. 3, pg. 5).

Connecting devices to WayPoint10A8U or WayPoint10A8DU:

Connect device to terminals marked [1-8] and [COM] (Fig. 4, pg. 6).

14. Set illuminated master power disconnect circuit breaker to the [RESET/ON] position (Figs. 2-4, pgs. 4-6).

15. LEDs will illuminate indicating each output is powered (Figs. 2-4, pgs. 4-6).

16. Upon completion of wiring secure enclosure door with latches and optional lock.
Caution: Equipment to be installed / serviced by authorized / trained personnel only.

Shut branch circuit power before installing / servicing equipment.

WARNING: When installing in a non-restricted service area use lock or other fastened means on door
latches. This installation should be made by qualified service personnel and should conform to the
National Electrical Code and all local codes.

LED Identification Chart:

ON OFF

Normal operating condition.

No AC output. Blown fuse or tripped PTC, illuminated master power disconnect
circuit breaker is tripped or OFF, AC failure.

To reset a tripped PTC turn the power off for 1 minute and then turn it back on.

Technical Specifications:

Parameter Description
Input power requirements

Indicators

Environmental Conditions

Regulatory Compliance

115VAC, 60Hz, 1A or 230VAC, 50Hz, 0.5A.
Individual power output LED indicators.

Illuminated master power switch.

Operating Ambient Temperature:

For 24VAC @ 4A output: - 40°C to 60°C (- 40°F to 140ºF).
For 28VAC @ 3.5A output: - 40°C to 70°C (- 40°F to 158ºF).

Relative Humidity: 85%, +/- 5%
Storage Temperature: - 40ºC to 75ºC (- 40ºF to 167ºF).
Operating Altitude: - 304.8 to 2,000m.

UL/cUL Listed for Information Technology Equipment (UL 60950-1)

Equipment to be Installed Outdoors (UL 60950-22).

CE European Conformity.

For fuse protected models:

Replace fuses with the same type and rating 5A/32V.

5A

32V

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may
be of sufficient magnitude to constitute an electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.

CAUTION: To reduce the risk of electric shock do not open
enclosure. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.

WayPoint10A Series - 3 -

Fig. 1

Fig. 2 - WayPoint10AU (Fuses)

Suggested Locations

for Wiring Inlets

Bottom of Enclosure

Circuit board incorporated

in WayPoint10ADU (PTCs)

PD2WP

5

COM 24V 28V

28V 24V COM

5

COM 24V 28V

Input Voltage

115V

115

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

CAUTION

HIGH VOLTAGE

230

Power Input

Ground

Lug

PD2WP

5

5

COM 24V 28V

28V 24V COM

COM 24V 28V

115

ALTRONIX CORP.

www.altronix.com

BROOKLYN, NY 11220

115V

LGN

- 4 - WayPoint10A Series

Input Voltage

230

Power Input

Fig. 3 - WayPoint10A4U (Fuses)

5

S P N

PD4WP

5

1 COM 2 COM

S P N

PD4WP

1 COM 2 COM

Used on WayPoint10A4DU

5

5

3 COM 4 COM

3 COM 4 COM

115V

115

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

CAUTION

HIGH VOLTAGE

115V

115

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

Input Voltage

230

Power Input

Input Voltage

230

Power Input

Ground

Lug

WayPoint10A Series - 5 -

Fig. 4 - WayPoint10A8U (Fuses)

5

5

S P N

5

1 2 3 4 5 6 7 8

PD8WP

1 2 3 4 5 6 7 8

Common

S P N

1 2 3 4 5 6 7 8

PD8WP

1 2 3 4 5 6 7 8

Common

Used on WayPoint10A8DU

5

5

5

5

5

115

Input Voltage

115V

230

Power Input

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

CAUTION

HIGH VOLTAGE

115V

115

Input Voltage

230

Power Input

Ground

Lug

LGN

ALTRONIX CORP.

www.altronix.com

BROOKLYN,NY 11220

- 6 - WayPoint10A Series

Wall Mount Installation

1- Place unit at desired location and secure with mounting
screws (not included) (Fig. 5, pg. 7).

Fig. 5

Pole Mounting Using Optional Pole Mount Kit PMK1 (not included):

This installation should be made by qualified service personnel. This product contains no serviceable parts.
PMK1 is intended for use with Altronix outdoor rated power supplies or accessories housed in WP1, WP2, WP3
and WP4 enclosures. Brackets are designed for use with the Wormgear Quick Release Straps (two included).

1. Thread one (1) wormgear quick release strap through the slots on the back of a mounting bracket (Fig. 6, pg. 7).

2. Once the desired height of the top Pole Mount bracket is achieved, tighten the straps down by sliding open
end of the strap through the locking mechanism on the strap, then tighten the screw with
flat head screwdriver or 5/16” hex socket driver (Fig. 7, pg. 8 and Fig. 9, pg. 7).

Fig. 8

Fig. 10a
5” (127mm) square pole

Fig. 9

Fig. 7

Fig. 10
2” to 8”(50.8mm to 203.2mm)
diameter round pole

Fig. 6

3. Attach the bottom bracket to the enclosure by inserting bolts through the flange of the enclosure and into the
bracket, tightening bolts with a 7/16” hex socket (Fig. 8, pg. 7).

4. Thread the second wormgear quick release strap through the slots on the back of the bottom mounting bracket
(Fig. 6, pg. 7).

5. Mount enclosure onto the top bracket by inserting bolts through flange of the enclosure and into the bracket,
tightening bolts with a 7/16” hex socket (Fig. 8, pg. 7).

6. Tighten the straps of the bottom bracket down by sliding the open end of the strap through the locking
mechanism on the strap, then tighten screw with flat head screwdriver or 5/16” hex socket driver
(Fig. 6, pg. 7).

7. Clip excess straps.

WayPoint10A Series - 7 -

Fig. 11

8.25” (209.6mm)

10.75” (273.1mm)

3.96”
(100.6mm)

Enclosure Dimensions (H x W x D approx.):

13.31” x 11.31” x 5.59” (338.1mm x 287.3mm x 142mm)

10.25”
(260.4mm)

10-32 X 0.25” (6.4mm)

BRASS INSERT (X2)

10.00”
(254mm)

12.00”
(304.8mm)

13.50”
(342.9mm)

12.75”
(323.9mm)

10-32 X 0.375” (9.6mm)

BRASS INSERT (X4)

PADLOCK LATCH ATTACHED WITH RIVETS

1.61”
(40.9mm)

11.31”

13.31”
(338.1mm)

(287.3mm)

STAINLESS STEEL PIANO HINGE

(Ø 0.375” (9.5mm) PADLOCK EYE).

5.59”
(142mm)

Altronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [e-mail] | Lifetime Warranty | Made in U.S.A.
IIWayPoint10A Series C28R

- 8 - WayPoint10A Series

Ø 0.32 (8.1mm) MOUNTING HOLE

TYP. 4 PLACES

8.00” (203.2mm)

MEMBER