CCTV Rack Mount Power Supplies
Installation Guide
Models Include:
Vertiline24C Vertiline24CD
- 24VAC or 28VAC @ 10 amp - 24VAC or 28VAC @ 10 amp
- Twenty-four (24) fuse protected outputs - Twenty-four (24) PTC protected outputs
Vertiline246C Vertiline246CD
- 24VAC or 28VAC @ 14 amp - 24VAC or 28VAC @ 14 amp
- Twenty-four (24) fuse protected outputs - Twenty-four (24) PTC protected outputs
Rev. 031808
More than just power.
TM
Overview:
Altronix Vertiline CCTV Rack Mount Power Supplies provide 24 power outputs in a space saving 1U EIA 19” rack mount
chassis which may be rack, wall or shelf mounted. The units feature individually selectable 24VAC and/or 28VAC power
outputs with surge suppression. Vertiline CCTV Rack Mount Power Supplies are also available in eight (8) and sixteen
(16) output models with various power ratings.
Specifications:
• 115VAC 60 Hz input.
• Twenty-four (24) individually selectable 24VAC
or 28VAC power outputs with OFF position.
• Twenty-four (24) power LED indicators.
• External blade fuses or PTC protected outputs.
• Surge suppression.
• Illuminated power disconnect circuit breaker with
manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Removable terminal blocks with locking screw flange.
• Ease of installation saves time and eliminates costly labor.
• Compact 1U rack mount chassis.
• Fits standard EIA 19” rack.
• Units can be rack, wall or shelf mounted.
Twenty-four (24) Output Rack Mount Configuration Reference Chart:
Altronix
Model
Number
Vertiline24C
Vertiline24CD
Vertiline246C
Vertiline246CD
Voltage (VAC)
Output
24VAC or
28VAC
24VAC or
28VAC
24VAC or
28VAC
24VAC or
28VAC
Total Output Current (Power)
10 amp 24
10 amp 24
14 amp 24
14 amp 24
Number of Outputs
Output Protection
Fused -- 3 amp 3 amp
-- PTC 2.5 amp --
Fused -- 3 amp 3 amp
-- PTC 2.5 amp --
Output Protection
Class 2 Rated Power Limited
(max. per output)
Current
Fuse Rating
10 amp 3 amp
15 amp 4 amp
Input Current
Main Fuse Rating
115VAC 60Hz
CCTV Equipment (UL 2044).
Agency Listings
UL Listed for Commercial
CUL Listed - CSA Standard
C22.2 No.1-04,
Audio, Video and Similar
Equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or
moisture. This installation should be made by qualified service personnel and should conform to
all local codes and in accordance with the National Electrical Code.
Installation Instructions:
1. Attach mounting brackets to Vertiline unit for rack or wall mount installation (Figs. 4-5, pg. 7). Affix rubber pads to
Vertiline for shelf installation (Fig. 6, pg. 7).
2.
Secure the unit in a rack, mount unit to a wall or place unit on a shelf as desired (unit should be spaced at least
3” from any video monitors). When installing the unit in a rack allow for one half of a U spacing above the unit
for ventilation.
3. Plug the grounded AC line cord (included) into the IEC 320 connector of the Vertiline unit (Fig. 1f, pg. 4).
Insert the plug end of the line cord into a grounded AC receptacle.
4.
Set illuminated master power disconnect circuit breaker to the (ON) position (Fig. 3, pg. 6).
Select 24VAC or 28VAC power output for cameras 1-24 with the corresponding voltage adjustment switches
5.
(Fig. 1b, pg. 4).
6.
Measure output voltage before connecting cameras. This helps avoid potential damage.
All terminals with common suffix (P) “1P, 2P ...” are the same polarity.
7. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 3, pg. 6).
8.
Connect the power outputs of terminals marked [1P & 1N] to the power inputs of camera 1 (Fig. 2, pg. 5).
Repeat this step for each additional camera (Outputs 2-24). After wiring is completed insert terminal b
corresponding connector and secure by tightening the screws.
- 2 - Vertiline24C
lock into the
9. Upon completion of wiring, set illuminated master power disconnect circuit breaker to the
ON (RESET) position (F
ig. 3, pg. 6).
10. The power LEDs (Green) on the faceplate for Outputs 1-24 will illuminate when AC power is present
(F
ig. 1a, pg. 4). If any of these LEDs are off, a loss of AC power output may be due to a blown fuse or a tripped
PTC caused by a short circuit or overload condition. If all of the LEDs are OFF there may be a complete loss of
supply power to the Vertiline unit or the illuminated master power disconnect circuit breaker is in the OFF position
or the main fuse 1-12 or 13-24 is blown (Fig. 1c, pg. 4).*
To restore the power output for Vertiline24C or Vertiline246C:
1- Switch corresponding output voltage switch to the OFF position (Fig. 1b, pg. 4).
2-
Eliminate the trouble condition.
3- Replace the corresponding automotive blade fuse.*
4- Switch output voltage switch to the 24VAC or 28VAC position as desired (Fig. 1b, pg. 4).
To restore the power output for Vertiline24CD or Vertiline246CD:
1- Switch corresponding output voltage switch to the OFF position (Fig. 1b, pg. 4).
2-
Eliminate the trouble condition.
3- Allow 1 minute for PTC to cool off.
4- Switch output voltage switch to the 24VAC or 28VAC position as desired (Fig. 1b, pg. 4).
*Note: Replace fuses with same type and rating:
Output fuses are rated @ 3 amp for all models.
Main fuse ratings:
10 amp for
Vertiline24C and Vertiline24CD.
Automotive
Blade Fuse
15 amp for Vertiline246C and Vertiline246CD.
Vertiline24C - 3 -
28VAC
OFF
24VAC
28VAC
OFF
24VAC
OFF
RESET
17
18 19 20
13
14 15 16
9
10 11 12
5
6 7 8
1
2 3 4
21
22 23 24
AC POWER
Main Fuse
13-24
1234
N
P
N
P
N
P
N
P
5678
N
P
N
P
N
P
N
P
9101112
N
P
N
P
N
P
N
P
13141516
N
P
N
P
N
P
N
P
17181920
N
P
N
P
N
P
N
P
21222324
N
P
N
P
N
P
N
P
Main Fuse
1-12
AC POWER
Main Fuse
13-24
1234
N
P
N
P
N
P
N
P
5678
N
P
N
P
N
P
N
P
9101112
N
P
N
P
N
P
N
P
13141516
N
P
N
P
N
P
N
P
17181920
N
P
N
P
N
P
N
P
21222324
N
P
N
P
N
P
N
P
Main Fuse
1-12
28VAC
OFF
24VAC
28VAC
OFF
24VAC
1f - IEC 320
Connector:
115VAC 60Hz
(grounded line
cord included).
1b - Output voltage switches:
Selects 24VAC or 28VAC
or OFF for each output.
1e - Output Fuses:
Automotive blade fuses.
1d - Power
Outputs: 24VAC
or 28VAC.
Fig. 1
1a - LED(s) 1-24:
Power LED indicators.
Vertiline24C, Vertiline24CD,
Vertiline246C or Vertiline246CD (front)
Vertiline24C or Vertiline246C (rear)
1c - Main Fuse:
Protects the
transformer
against overload.
Vertiline24CD or Vertiline246CD (rear)
- 4 - Vertiline24C
Vertiline24CD and Vertiline246CD do not have output fuses on the rear of the rack
mount chassis. The output PTCs are located on the inside of the rack mount chassis.
28VAC
OFF
24VAC
28VAC
OFF
24VAC
OFF
RESET
17
18 19 20
13
14 15 16
9
10 11 12
5
6 7 8
1
2 3 4
21
22 23 24
Main Fuse
13-24
1234
N
P
N
P
N
P
N
P
5678
N
P
N
P
N
P
N
P
9101112
N
P
N
P
N
P
N
P
13141516
N
P
N
P
N
P
N
P
17181920
N
P
N
P
N
P
N
P
21222324
N
P
N
P
N
P
N
P
Main Fuse
1-12
28VAC
OFF
24VAC
28VAC
OFF
24VAC
AC POWER
Typical Hookup:
Fig. 2
Vertiline24C - 5 -
1.625"
8.5"
.75"
19.125"
17.625"
(ON)
OFF
RESET
A
C POWER
Main Fuse
1
3-24
1234
NPNPNPN
P
5678
NPNPNPN
P
9101112
NPNPNPN
P
13141516
NPNPNPN
P
17181920
NPNPNPN
P
21222324
NPNPNPN
P
M
ain Fuse
1-12
28VAC
OFF
24VAC
28VAC
OFF
24VAC
17
18 19 20
13
14 15 16
9
10 11 12
5
6 7 8
1
2 3 4
21
22 23 24
28VAC
OFF
24VAC
28VAC
OFF
24VAC
The lightning flash with ar
presence of an insulated “DANGEROUS VOLTAGE” within the products enclosure that may be of sufficient
magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1U EIA 19” Rack Mount Chassis Mechanical Drawing & Dimensions:
1.625”H x 19.125”W x 8.5”D
row head symbol within an equilateral triangle is intended to alert the user to the
CAUTION: To reduce the risk of electric shock do not open enclosure. There are
no user ser
viceable parts inside. Refer servicing to qualified service personnel.
REAR
TOP & BOTTOM
FRONT
Fig. 3
Power switch with built-in circuit breaker:
OFF position - Switch not Illuminated. Outputs not po
RESET (ON) position - Switch illuminated. Outputs powered.
Circuit breaker tripped - Switch not Illuminated. Power LEDs on faceplate
are not illuminated. Outputs not powered.
To reset circuit breaker set power switch to the ON (RESET) position
(Fig. 3, pg. 6).
wered.
- 6 - Vertiline24C
Mounting Options:
B
A
C
B
A
C
A
B
Rack Mount Installation
1- Remove factory installed screws from both sides of rack chassis (Fig. 4a).
2- Install mounting brackets (A) on the left and right side of rack chassis using the
two (2) flat head screws (B) (included) (Fig. 4b).
3-
Place unit into desired EIA 19” rack position and secure with mounting screws (not included) (Fig. 4c).
Fig. 4
Fig. 4a
Top Top
Fig. 4b
Fig. 4c
To
Front
Front
Left
Left
Front Left
Remove
Wall Mount Installation
1- Install mounting brackets (A) on the left and right side of rack chassis using
two (2) flat head screws (B) (included) (Fig. 5a).
2-
Place unit at desired location and secure with mounting screws (not included) (Fig. 5b).
Caution: It is necessary to make sure mounting screws are securely fastened to a beam when installing.
Fig. 5
Fig. 5a
Fig. 5b
p
Shelf Installation
1- Position and affix rubber pads (C) (included) at each
corner on the bottom of the unit (Fig. 6).
2-
Place unit in desired location.
F
ig. 6
Left Side
Mounting Hardware (Included):
Two (2) mounting brackets
Six (6) flat head screws
for mounting brackets.
Four (4) rubber pads.
Rubber Pad
Vertiline24C - 7 -
Notes:
Altronix is not responsible for any typographical errors.
Altronix Corp.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
web site: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
IIVertiline24CSeries K06H
- 8 - Vertiline24C
MEMBER
Loading...