Altronix TROVE1M1R Installation Guide

Access & Power Integration

Trove1M1R

- Trove rack enclosure with Altronix/Mercury backplane (TM1R)

Installation Guide

All registered trademarks are property of their respective owners. More than just power.™

Rev. TMR112818

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

Overview:

Altronix Trove1M1R rack mount access & power integration solution accommodates various combinations of Mercury boards with or
without Altronix power supplies and accessories for access systems.

Specifications:

Agency Listings:

• CE European Conformity.

Trove1M1R

Trove1R rack mount enclosure with
TM1R Altronix/Mercury backplane.

• 16 Gauge black enclosure with ample knockouts for
convenient access.

• Modular 2U standard EIA 19” drawer with
extendable slides up to 48”.

• Dimensions (H x W x D): 3.25” x 19.0” x 26.5”
(82.6mm x 482.6mm x 673.1mm).

• Includes tamper switch (Altronix Model TS112 or equivalent)
and cam lock.

TM1R

Altronix/Mercury backplane.

• 16 Gauge backplane.

• Dimensions (H x W x D): 18.5” x 15.25” x 0.3125”
(469.9mm x 387.4mm x 7.9mm).

Optional Accessories:

• RE2: Rack Mount Battery Enclosure accommodates up to four (4)
12VDC/7AH batteries

• WM5, WM25, WM100: Magnetic Cable Tie Mounts
(5, 25, 100 counts).

• LC3: 6 ft. three-wire line cord.

Backplane Accommodates a Combination of the Following:

Altronix:

• One (1) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB,
ACMS8(CB) or ACM8(CB).

• Up to two (2) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB),
PDS8(CB), or VR6.

Hardware and Accessories:

Spacer | 5/16” Pan Head Screw | Lock Nut

Mercury:

• Up to four (4) EP1502, MR52, MR16IN or MR16OUT.

• Up to two (2) EP2500 or MUX8.

• Up to two (2) EP1501 or MR51e.

• Up to two (2) MR50.

- 2 - Trove1M1R

Assembling and Attaching Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 1, pg. 3).

2. Attach arms to each other using bolts and lock nuts (Fig. 1a, pg. 3).

3. Attach the hinge brackets to the ends of arms using bolts and nuts positioning them as shown on Fig. 1b, pg. 3.

4. Make sure that all nuts are tightened.

Hardware (included):

Ten (10) bolts and eight (8) lock nuts

Fig. 1a

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable rail using bolts and lock nuts (included) (Fig. 2, 2a, pg. 3).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included).

Fig. 2

Fig. 1

Two (2)

Fig. 1b

Fig. 2a

Trove1M1R - 3 -