Altronix TROVE1AL1R Installation Guide

Access & Power Integration

Trove1AL1R

- Trove rack enclosure with Altronix backplane (TAL1R)

Installation Guide

All registered trademarks are property of their respective owners. More than just power.™

Rev. TALR102518

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

Overview:

Altronix Trove1AL1R accommodates various combinations of Altronix power supply/charger boards and sub-assemblies.

Specifications:

Agency Listings:

• CE European Conformity.

Trove1AL1R

Trove1R rack mount enclosure with TAL1R Altronix backplane.

• 16 Gauge black enclosure with ample knockouts for
convenient access.

• Includes: tamper switch, cam lock and mounting hardware.
Modular 2U standard EIA 19” drawer with
extendable slides up to 48”.

• Dimensions (H x W x D): 3.25” x 19.0” x 26.5”
(82.6mm x 482.6mm x 673.1mm).

TAL1R

Altronix backplane.

• 16 Gauge backplane.

• Dimensions (H x W x D): 18.5” x 15.25” x 0.3125”
(469.9mm x 387.4mm x 7.9mm).

Optional Accessories:

• RE2: Rack Mount Battery Enclosure accommodates up to four (4)
12VDC/7AH batteries

• WM5, WM25, WM100: Magnetic Cable Tie Mounts
(5, 25, 100 counts).

• LC3: 6 ft. three-wire line cord.

Backplane Accommodates a Combination of the Following:

• Up to two (2) eFlow4NB, eFlow6NB, eFlow102NB, or eFlow104NB.

• Up to four (4) ACM8(CB) or ACMS8(CB).

• Up to two (2) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), or VR6.

Hardware and Accessories:

Spacer | 5/16” Pan Head Screw | Lock Nut

- 2 - Trove1AL1R

Assembling and Attaching Z Bracket Wire Management Accessory (included):

Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.

1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 1, pg. 3).

2. Attach arms to each other using bolts and lock nuts (Fig. 1a, pg. 3).

3. Attach the hinge brackets to the ends of arms using bolts and nuts positioning them as shown on Fig. 1b, pg. 3.

4. Make sure that all nuts are tightened.

Hardware (included):

Ten (10) bolts and eight (8) lock nuts

Fig. 1a

5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable rail using bolts and lock nuts (included) (Fig. 2, 2a, pg. 3).

6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included).

Fig. 2

Fig. 1

Two (2)

Fig. 1b

Fig. 2a

Trove1AL1R - 3 -