Altronix THWD2 Installation Guide

THWD2_Rev. 122418

Access & Power Integration

THWD2

- Honeywell ProWatch/WinPak door backplane for Trove2 and Trove3

Installation Guide

Overview:

THWD2 accommodates a variety of Honeywell ProWatch/WinPak boards for access systems of up to twelve (12) doors.

Specifications:

• 16 Gauge backplane.
Dimensions (H x W x D): 23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm).

Backplane Accommodates a Combination of the Following:

• Up to six (6) PRO32IC, PRO32R2, PRO32IN, PRO32OUT, PW6K1IC, PW6K1R2, PW6K1IN, PW6K1OUT modules.

• One (1) PRO22MX8 module.

Hardware:

Nylon Spacer | 5/16” Pan Head Screw | Lock Nut

A

A

A

A

A

A

B

THWD2: Configuration of Honeywell ProWatch/WinPak Boards:

Screw

Honeywell ProWatch/WinPak Access Controllers:

1. Fasten spacers (provided) into pem configuration (A) or (B) of backplane (Fig. 1, pg. 2).

2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 1a, pg. 2).

3. Mount backplane to enclosure with hardware.

Honeywell ProWatch/WinPak Access Controller Position Chart for the Following Models:

Honeywell Board Pem Mounting

PRO32IC, PRO32R2, PRO32IN, PRO32OUT,
PW6K1IC, PW6K1R2, PW6K1IN, PW6K1OUT

PRO22MX8 B

Fig. 1

A

Pan Head

Spacer

Honeywell
Access Controller

Fig. 1a

Pem

Backplane

- 2 - THWD2 - Honeywell ProWatch/WinPak Door Backplane