Tango8P & Tango8PCB
PoE Driven Multi-output Power Supply/Chargers
Description
Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts an
IEEE802.3bt PoE input into eight (8) regulated 24VDC and/or 12VDC outputs
up to 72W. Ideal for access installations, it eliminates the need for a high
voltage inside the enclosure. Tango8P(CB) is designed to support a single
12V LiFePO4 (Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.
Key Features
Tango8P
- Utilizes 4PPoE (802.3bt) to simultaneously deliver 12VDC &
24VDC for powering access control and security devices.
- Built-in Lithium Iron Phosphate (LiFePO4) battery charger for
optimized power backup.
- Operates with Altronix NetWay Midspans such as NetWay1BT,
NetWay4BT or NetWay8BT.
- Can be installed by any low voltage contractor.
- Eight (8) fuse or PTC protected outputs.
- Any of the eight (8) outputs are selectable for 12VDC or 24VDC.
- Individual outputs may be set to OFF position for servicing.
- Lifetime Warranty / Made in the U.S.A.
Rev. Tango8P - 011320
Tango8P & Tango8PCB
PoE Driven Multi-output Power Supply/Chargers
Specifications
Ethernet Input
802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W
CAT-6 or higher cable is recommended for optimum performance
Power Output (when using 802.3bt 90W)
12VDC up to 6.25A (72W), and/or 24VDC up to 3A (72W).
Combined output not to exceed 72W.
When charging batteries:
12VDC up to 5.4A (62W) and/or 24VDC up to 2.7A (62W).
Combined output not to exceed 62W.
Ethernet Output
Pass-through Ethernet Port (data only).
Battery Charging Circuit
12VDC battery charger for Lithium Iron Phosphate Battery (LiFeP04 only).
Unique technology allows for single battery to backup.
12VDC and/or 24VDC systems.
Supervision
Loss of PoE Input.
Battery Supervision
Indicators (LED)
Input Indicates input voltage is present.
Output Indicates normal operating condition.
PoE Type PoE Class Indicator
Supervision PoE Fail or BAT Fail.
PDS8/PDS8CB Power Distribution Module:
Inputs
12VDC and 24VDC from Tango1B, factory wired.
Main Fuse Rating 10A/32V.
Outputs
Tango8P: Fuse protected outputs rated @ 3A per output,
non power-limited. Total output 20A max.
Tango8PCB: PTC protected outputs rated @ 2A per output,
Class 2 power-limited. Total output 16A max.
Do not exceed the individual power supply ratings.
Any of the eight (8) power outputs are selectable for 12VDC or 24VDC.
Individual outputs may be set to OFF position for servicing.
Indicators (LED)
Individual voltage LEDs
Green: 12VDC
Green and Red: 24VDC.
Physical and Environmental
Dimensions (L x W x H)
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)..
Product Weight 9.0 lb. (4.08 kg).
Shipping Weight 10.3 lb. (4.67 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr. (approx.) 54 BTU/Hr
Accessories
NetWay1BT – 802.3bt (4PPoE) Midspan/Injector
- Single port midspan/injector delivers up to 90W max
NetWay4BT – 802.3bt Midspan/Injector
- 4-Port midspan/injector delivers up to 90W per por (480W max)
NetWay8BT – 802.3bt Midspan/Injector
- 8-Port midspan/injector delivers up to 90W per por (480W max)
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
NetWay4BT
Loading...