Altronix TANGO8AP, TANGO8APCB Specsheet

Tango8AP & Tango8APCB

PoE Driven Multi-Output Power Supply/Chargers
With Access Power Controllers

Description

Altronix Tango8AP(CB) PoE Driven Multi-Output Power Supply/Charger With

Access Power Controller converts an IEEE802.3bt PoE input into eight (8)

regulated 24VDC and/or 12VDC outputs and eight (8) protected 24VDC and/or

12VDC outputs up to 65W. It eliminates the need for a high voltage inside of

an enclosure. Tango8AP(CB) is designed to support a single 12VDC LiFePO4

(Lithium Iron Phosphate) battery for 12VDC and 24VDC backup.

Key Features

Tango8AP

- Utilizes Hi-PoE (802.3bt) to simultaneously deliver 12VDC &
24VDC for powering access control and security devices.

- Built-in Lithium Iron Phosphate (LiFePO4) battery charger for
optimized power backup.

- Operates with Altronix NetWay Midspans such as NetWay8BT.

- Can be installed by any low voltage contractor.

- Eight (8) independently controlled outputs.

- Eight (8) auxiliary power outputs (unswitched).

- Fire Alarm disconnect (latching or non-latching) is individually
selectable for any or all of the eight (8) outputs.

- Alarm output relay indicates that FACP input is triggered.

- Eight (8) additional fuse or PTC protected power outputs.

- Any of the sixteen (16) outputs are selectable for
12VDC or 24VDC.

- Individual outputs may be set to OFF position for servicing.

- Supervision:

- AC Fail

- Battery Fail and Battery Presence.

- Lifetime Warranty / Made in the U.S.A.

Rev. Tango8AP - 10212019

Tango8AP & Tango8APCB

PoE Driven Multi-output Power Supply/Chargers

Specifications

Ethernet Input

802.3bt PoE up to 90W or 802.3at up to 30W or 802.3af up to 15W

Power Output (when using 802.3bt 90W)

12VDC up to 5.4A (65W) and/or 24VDC up to 2.7A (65W).
Combined output not to exceed 65W.

When charging batteries:

12VDC up to 4.6A (55W) and/or 24VDC up to 2.3A (55W).
Combined output not to exceed 55W.

Ethernet Output

Pass-through Ethernet Port (data only).

Battery Charging Circuit

12VDC battery charger for Lithium Iron Phosphate Battery (LiFeP04 only).
Unique technology allows for single battery to backup.
12VDC and/or 24VDC systems.

Supervision

Loss of PoE Input.
Battery Supervision

Indicators (LED)

Input Indicates input voltage is present.
Output Indicates normal operating condition.

PoE Type PoE Class Indicator
Supervision PoE Fail or BAT Fail.

PDS8/PDS8CB Power Distribution Module:
Inputs:
12VDC and 24VDC from Tango1B, factory wired.

Main Fuse Rating 10A/32V.

Outputs

Tango8AP: Fuse protected outputs rated @ 3A per output,
non power-limited. Total output 20A max.

Tango8APCB: PTC protected outputs rated @ 2A per output,
Class 2 power-limited. Total output 16A max.

Do not exceed the individual power supply ratings.
Any of the eight (8) power outputs are selectable for 12VDC or 24VDC.
Individual outputs may be set to OFF position for servicing.

Indicators (LED)

DC Output Individual voltage LEDs indicate
12VDC (Green) or 24VDC (Green and Red).

ACMS8/ACMS8CB Access Power Controller:

Inputs
12VDC and 24VDC from Tango1B, factory wired.

Current Consumption: 0.6A @ 12V, 0.3A @ 24V with all relays energized
Main Fuse Rating 15/32A.

ACMS8/ACMS8CB Access Power Controller (cont’d):

Trigger Inputs

Eight (8) individually controlled trigger inputs:
a) Normally open (NO) inputs.
b) Normally closed (NC) inputs.
c) Open collector sink inputs.
d) Wet Input (5VDC - 24VDC) with 10K resistor.
e) Any combination of the above.

Outputs

Tango8AP: Eight (8) Fuse protected outputs rated @ 2.5A per output,
non power-limited. Total output 20A max.

Tango8APCB: Eight (8) PTC protected outputs rated @ 2A per output,
Class 2 power-limited. Total output 16A max.

Do not exceed the individual power supply ratings.
Eight (8) selectable 12VDC or 24VDC independently controlled

outputs or eight (8) indepently controlled Form “C” relay outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
c) Auxiliary power outputs (unswitched).
d) Any combination of the above.

Any of the eight (8) power outputs are selectable for 12VDC or 24VDC.
Individual outputs may be set to OFF position for servicing.

Output Ratings

Fuses are rated 2.5A each, PTCs are rated at 2A.

Fire Alarm Disconnect

Supervised Latching or non-latching, individually
selectable for any or all of the eight (8) outputs.

EOL 10K Resistor.

Indicators (LED)

Red LEDs Outputs are triggered (relays energized).
Blue LED FACP disconnect is triggered.

Individual voltage LEDs
Green: 12VDC

Red: 24VDC.

Physical and Environmental

Dimensions (L x W x H)

15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)..

Product Weight 9.3 lb. (4.2 kg).
Shipping Weight 10.6 lb. (4.8 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).

Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr. (approx.) 54 BTU/Hr

Accessories

NetWay8BT

NetWay8BT – 802.3bt Managed Midspan

- 8-Port, 480W midspan/injector delivers up to 90W per port

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA