Altronix TROVE2AG2, TROVE3AM3, TAM3, TAG2 Installation Guide
SIGNALING
Access & Power Integration
Trove2AG2
- Trove2 enclosure with Altronix/AMAG M4000 backplane (TAG2)
TAG2
- Altronix/AMAG M4000 backplane only
Trove2AM2
- Trove2 enclosure with Altronix/AMAG M2150 backplane (TAM2)
TAM2
- Altronix/AMAG M2150 backplane only
Trove3AM3
- Trove3 enclosure with Altronix/AMAG M2150 / M4000 backplane (TAM3)
TAM3
- Altronix/AMAG M2150 / M4000 backplane only
Installation Guide
All registered trademarks are property of their respective owners. More than just power.™
Rev. TAMAG122418
Installing Company: _____________________ Service Rep. Name: __________________________________________
Address: ________________________________________________________ Phone #: _________________________
Overview:
Trove2AG2/Trove2AM2 and Trove3AM3 accommodates AMAG boards with or without Altronix power supplies and sub-assemblies for
access systems.
Specifications:
Trove2AG2 - Trove2 enclosure with TAG2 Altronix/AMAG M4000 backplane
Trove2AG2 accommodates a combination of the following:
• Altronix Modules:
- Up to two (2) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB or PoE201.
- One (1) NetWaySP4B.
- Up to three (3) LINQ8PD/ LINQ8PDCB, ACM8/ACM8CB, ACMS8/ACMS8CB, ACM4/ACM4CB, MOM5, PD4UL/PD4ULCB,
PD8UL/PD8ULCB, PDS8/PDS8CB, or VR6.
• AMAG Modules:
- Up to three (3) M4000 modules.
• Includes: tamper switch, cam lock, lock nuts, and mounting hardware.
• 16 Gauge enclosure with ample knockouts for convenient access.
Enclosure Dimensions (H x W x D): 27.25” x 21.75” x 6.5” (692.15mm x 552.5mm x 165.1mm).
TAG2 - Altronix/AMAG M4000 backplane only
• Includes mounting hardware.
Dimensions (H x W x D): 25.375” x 19.375” x 0.3125” (644.5mm x 482.6mm x 7.9mm).
Trove2AM2 - Trove2 enclosure with TAM2 Altronix/AMAG M2150 backplane
Trove2AM2 accommodates a combination of the following:
• Altronix Modules:
- Up to two (2) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB or PoE201.
- Up to two (2) LINQ8PD/ LINQ8PDCB, ACM8/ACM8CB, ACMS8/ACMS8CB, ACM4/ACM4CB, MOM5, PD4UL/PD4ULCB,
PD8UL/PD8ULCB, PDS8/PDS8CB, or VR6.
• AMAG Modules:
- One (1) M2150-2DBC, M2150-4DBC or M2150-8DBC modules.
- One (1) M2150-2DC, M2150-4DC or M2150-AC244 modules.
• Includes: tamper switch, cam lock, lock nuts and mounting hardware.
• 16 Gauge enclosure with ample knockouts for convenient access.
Enclosure Dimensions (H x W x D): 27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm).
TAM2 - Altronix/AMAG M2150 backplane
• 16 Gauge backplane.
• Includes mounting hardware.
Dimensions (H x W x D): 25.375” x 19.375” x 0.3125” (644.6mm x 492.1mm x 7.9mm).
Trove3AM3 - Trove3 enclosure with TAM3 Altronix/AMAG M2150 / M4000 backplane
Trove3AM3 accommodates a combination of the following:
• Altronix Modules:
- Up to two (2) eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB or PoE201.
- Up to two (2) ACM8/ACM8CB, ACMS8/ACMS8CB.
- Up to four (4) LINQ8PD/ LINQ8PDCB, ACM4/ACM4CB, MOM5, PD4UL/PD4ULCB, PD8UL/PD8ULCB, PDS8/PDS8CB, VR6.
• AMAG Modules:
- Up to two (2) M2150-4DC or M2150-AC244, M2150-DBU M2150-4DBC or M2150-8DBC modules.
- Up to four (4) M4000 modules.
• Includes: tamper switch, cam lock, lock nuts and mounting hardware.
• 16 Gauge enclosure with ample knockouts for convenient access.
Enclosure Dimensions (H x W x D): 36.12” x 30.12” x 7.06” (917.5mm x 768.1mm x 179.3mm).
TAM3 - Altronix/AMAG M2150 / M4000 backplane
• 16 Gauge backplane.
• Includes mounting hardware.
Dimensions (H x W x D): 34.0” x 28.0” x 0.3125” (863.6mm x 711.2mm x 7.9mm).
Agency Listings:
• UL 294 - 6th edition: Line Security I, Destructive Attack I, Endurance IV, Stand-by Power II*.
* Stand-by Power Level I if no battery is supplied.
• This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.
• CE European Conformity.
- 2 - Trove2AG2 / Trove2AM2 / Trove3AM3
Installation Instructions for Trove2 / Trove3:
Tamper Switch
(provided)
To Access Control Panel or
UL Listed Reporting Device
Edge of
Enclosure
Enclosure
1. Remove backplane from enclosure prior to mounting (do not discard hardware).
2. Mark and predrill holes in the wall to line up with the top keyholes in the enclosure. Install the upper fasteners and screws in the wall.
with the screw heads protruding. Place the enclosure’s upper keyholes over the screws; level and secure. Mark the position of the
lower holes. Remove the enclosure. Drill the lower holes and install the fasteners. Place the enclosure’s upper keyholes over the
upper screws. Install the lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 10, 12).
3. Mount included UL Listed tamper switch(es) (Altronix Model TS112 or equivalent) in desired location, opposite hinge.
Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from the right side (Fig. 1, pg. 3).
Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed reporting device.
To activate alarm signal open the door of the enclosure.
4. Mount Altronix/AMAG boards to backplane, refer to pages 4-6.
Fig. 1
Hardware:
Metal or Nylon Spacer | 5/16” Pan Head Screw | Lock Nut
Trove2AG2 / Trove2AM2 / Trove3AM3 - 3 -
TAG2: Configuration of Altronix Power Supply and/or Sub-Assembly Boards and
AMAG M4000 Boards
1. Fasten spacers (provided) to pems that match the hole pattern for Altronix power supply/chargers and sub-assemblies (Fig. 2, pg. 4).
Fasten metal spacers in the correct locations to provide proper grounding, see below (Fig. 2, pg. 4).
Fasten spacers (provided) to pems that match the hole pattern for AMAG M4000 modules.
2. Mount boards to spacers utilizing 5/16” pan head screws (provided) (Fig. 2, 2a, pg. 4).
3. Fasten TAG2 backplane to Trove2 enclosure utilizing lock nuts (provided).
Power Supply, Sub-Assembly and Access Controller
Position Chart for the Following Models:
Boards Pem Mounting
eFlow4NB, eFlow6NB, eFlow102NB, eFlow104NB, ACM8/ACM8CB, ACMS8/ACMS8CB or PoE201 A
NetWaySP4B B
LINQ8PD/ LINQ8PDCB, ACM4/ACM4CB, MOM5, PD4UL/PD4ULCB, PD8UL/PD8ULCB, PDS8/PDS8CB, or VR6 C
AMAG M4000 Boards D
Fig. 2
D
A
Metal Spacer Placement
A
Metal Spacer Placement
A
B
C
D
D
C C
Spacer
Fig. 2a
Pem
Pan Head
Screw
- 4 - Trove2AG2 / Trove2AM2 / Trove3AM3
Power Supply or
Sub-Assembly
Backplane
Loading...