Altronix T3MK77F16 Specsheet

T3MK77F16

Access & Power Integration Solution

Description

Altronix T3MK77F16 kit consists of Trove3 enclosure and TM3 Mercury/Altronix
backplane with two 24VDC @ 10A power supply/chargers, two eight (8) fuse pro­tected output access control modules and two eight (8) fuse protected output power
distribution modules. This kit also accommodates various combinations of Mercury/
Lenel* boards for up to sixteen (16) doors in a single enclosure. Trove simplifies
board layout and wire management, reduces installation time and labor costs.

*Also compatible with these authentic Mercury partners:

AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls,
Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic Video
Insight, Quintron, RS2, S2 Security, Schneider Electric, Vanderbilt

Key Features

- Accommodates the following Mercury controllers:
EP1502, MR52, MR16IN, MR16OUT, EP2500, MUX8.

- Convenient knockout configuration:

- Single 2.415” diameter knockout located top of enclosure.

- Two (2) double knockouts (1.948” and 1.5”).

- Thirteen (13) double knockouts (1.115” and 1.362”)

- 16 AWG galvanized steel backplane simplifies board layout and
wire management.

- Filtered and electronically regulated outputs.

- Thermal and short circuit protection with auto reset.

- Supervision

- AC Fail

- Low Battery and Battery Presence

- Low power shutdown.

- Built-in charger for sealed lead acid or gel type batteries.

- Instantaneous transfer to stand-by batteries.

- CE European Conformity.

- Enclosure accommodates up to four (4) 12VDC/12AH batteries.

- Lifetime Warranty*/Made in the U.S.A.

T3MK77F16

- AC input and DC output LED indicators.

*Altronix Power Supply/Chargers and Sub-Assemblies only

Accessories (order separately)

LINQ2 - Network Supervision

Altronix LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN

- Remotely reports accurate power diagnostics

- Controls power and resets devices

- Reports system diagnostics via Email

LINQ2

WM5, WM25, WM100 - Magnetic Cable Tie Mounts

Altronix WM5, WM25, and WM100 are packs of 5, 25 or 100 magnetic cable tie mounts respectively.
They accommodate standard zip ties or velcro straps. These are ideal for wire management in our Trove series.

WM5

MM4, MM8, MM12, MM24 - Magnetic Mounting Solution

Altronix mounting magnets accommodate screws and nylon standoffs to allow for mounting various boards/
accessories in any metal enclosure or backplane.

Mounting Magnet

Rev. T3MK77F16 - 10082019

T3MK77F16

Access & Power Integration Solution

Specifications

Two (2) Power Supplies (eFlow104NB):

Input

Voltage 120VAC, 60Hz, 9A max.
Input Fuse 6.3A/250V.

Output

Voltage 24VDC @ 10A.
Auxiliary 1A (unswitched).
Protection Overvoltage protection. Filtered and regulated.

Battery Backup

Type Sealed lead acid or gel type.
Fuse Rating 15A/32VDC.
Failover Upon AC loss, instantaneous.

Fire Alarm Disconnect

Supervised Latching or non-latching.
EOL 10K Resistor.

Supervision

AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown

Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units (depending on the power supply).
Prevents deep battery discharge.

Indicators (LED)

AC Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.

Two (2) Power Distribution Modules (PD8UL):

Input

Voltage 24VDC from eFlow104NB.

Outputs

Voltage 24VDC.
Fuses 3.5A/250V.

Indicators (LED)

Green LED DC Output.

T3MK77F16 Kit:

Agency Listings

All components of this Trove kit are UL Listed sub-assemblies.
Please refer to the corresponding Sub-Assembly Installation Guides for
further information.

CE European Conformity.

Physical and Environmental:

Dimensions (H x W x D)

36.12” x 30.125” x 7.06” (917.5mm x 768.1mm x 179.3mm).

Weight (approx.)
Product 85.6 lb. (38.83 kg).
Shipping 98.8 lb. (44.82 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr. (approx.): 289 BTU/Hr.

Two (2) Access Power Controllers (ACM8):

Input

Voltage 24VDC from eFlow104NB.
Input Fuse 10A/250V.

Outputs

Voltage 24VDC.
Eight (8) 24VDC independently controlled fused outputs:

a) Fail-Safe and/or Fail-Secure power outputs.
Form “C” Relays rated 28VAC or VDC @ 2.5A.

b) Auxiliary power outputs (unswitched).
c) Any combination of the above.
Output Fuses 3.5A/250V.

Indicators (LED)

Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA