Altronix T2KK3F8Q, T2KK3F8, T2KK3F8D, T2KK3F8DQ Specsheet
Trove / Keyscan Kits
Access & Power Integration Solution
Description
Altronix Trove Keyscan kits are pre-assembled and consist of Trove2KA2 enclosure/
backplane with factory installed Altronix power supply/charger, transformer, and
sub-assemblies. These kits also accommodate various combinations of Keyscan
boards for up to eight (8) doors in a single enclosure. Trove simplifies board layout
and wire management, reduces installation time and labor costs.
Key Features
T2KK3F8Q
- Accommodates the following Keyscan controllers:
either CA250B, CA4500B or CA8500B,
up to two (2) OCB8, and one (1) of each DPS15 and CIM.
- Convenient knockout configuration:
- Single 2” diameter knockout located top center of enclosure
- Sixteen (16) double knockouts (1” and 0.75”).
- 16 AWG galvanized steel backplane simplifies board layout and
wire management.
- Filtered and electronically regulated outputs.
- Thermal and short circuit protection with auto reset.
*Altronix Power Supply/Chargers and Sub-Assemblies only
Trove Keyscan Kit Components Reference Chart
Altronix
Model Number
T2KK3F8
T2KK3F8Q
T2KK3F8D
T2KK3F8DQ
Maximum Number of
Doors Accommodated
8 eFlow6NB
Power Supply
- Supervision
- AC Fail
- Low Battery and Battery Presence
- Low power shutdown.
- Built-in charger(s) for sealed lead acid or gel type batteries.
- Instantaneous transfer to stand-by batteries.
- AC input and DC output LED indicators.
- Enclosure accommodates up to four (4) 12VDC/12AH batteries.
- Lifetime Warranty* / Made in the U.S.A.
Network Communications
Module
----
LINQ2
----
LINQ2
Access Power
Controllers
ACM8
ACM8CB
Transformer
T16100
Rev. TroveK Kits - 12202017
Trove / Keyscan Kits
Access & Power Integration Solution
Trove Keyscan Kit Configuration Reference Chart
Nominal DC
Output Voltage
[DC] [Aux]
Maximum Supply Current
for Main and Aux. Outputs
Altronix
Model
Number
T2KK3F8
T2KK3F8Q
T2KK3F8D
T2KK3F8DQ
24VDC
Output
Range (V)
20.19-26.4 20.19-26.4
20.17-26.4 20.28-26.4 - 8 - 2.0 - 2A
24VDC
Output
Range (V)
on Power Supply board and
ACM8/ACM8CB Access Power
Controller’s outputs (A)
24VDC @ 5.8A
Specifications
Input
Voltage 120VAC, 3.5A, 60Hz.
Fusing 5A/250V.
Outputs
Voltage 24VDC, see Configuration Reference Chart.
Current 5.8A max.
Other Overvoltage protection.
Filtered and regulated.
Back-up Battery (not included)
Capacity 12AH / 12VDC (Up to 4 within enclosure).
40 AH / 65 AH (requires separate enclosure).
Type Sealed lead acid or gel type.
Fuse Rating 10A/32V.
Failover Upon AC loss, instantaneous.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
71-73% for 12V units and 70-75% for 24V units
(depending on the power supply). Prevents deep battery discharge.
Fail-Safe/
Fail-Secure or
Dry Form “C”
Outputs
8 - 2.5 -
Fail-Safe/
Fail-Secure
Outputs
(auto-resettable)
Current Per
ACM8 Output (A)
Current Per
ACM8CB Output (A)
10A/
250V
ACM8/ACM8CB Board
Input Fuse Rating
ACM8 Board
Output Fuse Rating
2.5A -
Indicators (LED)
Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.
Physical and Environmental
Dimensions (H x W x D)
27.25” x 21.5” x 6.5” (692.2mm x 546.1mm x 165.1mm).
Weight (approx.)
Model Product Weight Shipping Weight
T2KK3F8 40.9 lb. (18.55 kg) 46.9 lb. (21.27 kg)
T2KK3F8Q 41.3 lb. (18.73 kg) 47.3 lb. (21.45 kg)
T2KK3F8D 40.9 lb. (18.55 kg) 46.9 lb. (21.27 kg)
T2KK3F8DQ 41.3 lb. (18.73 kg) 47.3 lb. (21.45 kg)
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr (approx.): 111 BTU/Hr.
ACM8CB Board
Output PTC Rating
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
Loading...