Altronix T2885WP Installation Instructions

T2885WP - Outdoor AC Power Supply

XFMR

Input

115VAC

50/60Hz

.95 amp

Black
Lead

White
Lead

Output

24 VAC

4 amp

Overview:

The Altronix T2885WP Outdoor CCTV Camera Power Supply provides 28VAC with a total of 3.5 amp
continuous supply current. The NEMA 4 rated Outdoor enclosure permits installation close to the outdoor
CCTV equipment which reduces the need for long wire runs, which eliminates voltage drop.

Specifications:
Input:

• Input 115VAC 50 / 60 Hz, .95 amp.

Output:

• 28VAC output.

• 3.5 amp total supply current.

• Secondary fuse rated @ 3.5 amp/250VA

Additional Features:

• NEMA 4 rated outdoor enclosure.

• Ease of installation saves time and
eliminates costly labor.

Enclosure dimensions: 12"H x 8"W x 6"D

Installation Instructions:

1. Mount T2885WP in desired location

2. Connect AC power (115VAC 50/60 Hz) to the

black and white flying leads of the transformer
(Fig. 1).

3.

Measure output voltage before connecting device.
This helps avoid potential damage.

4. Connect devices to terminal block on the inside

back of the enclosure.

5. Upon completion of wiring, secure enclosure door.

WARNING: This installation should be made
by qualified service personnel and should
conform to all local codes and in accordance
with the National Electrical Codes.

MEMBER

Altronix Corp.
140 58th Street, Brooklyn, New
website: www.altronix.com, e-mail: [e-mail], Lifetime Warranty, Made in U.S.A.
IIT2885WP - Rev. 020405 B04E

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

York 11220 USA, 718-567-8181, fax: [phone]

Fig. 1