Altronix T1RM3F4, T1RM3F4D Installation Guide
Access & Power Integration
T1RM3F4
Fully assembled kit includes:
- Trove1R rack enclosure with Altronix/Mercury backplane (TM1R)
- (1) eFlow6NB - Power Supply/Charger
- (1) VR6 - Voltage Regulator
- (1) PDS8 - Fused Dual Output Power Distribution Module
- (1) ACM4 - Fused Access Power Controller
T1RM3F4D
Fully assembled kit includes:
- Trove1R rack enclosure with Altronix/Mercury backplane (TM1R)
- (1) eFlow6NB - Power Supply/Charger
- (1) VR6 - Voltage Regulator
- (1) PDS8CB - PTC Dual Output Power Distribution Module
- (1) ACM4CB - PTC Access Power Controller
Installation Guide
All registered trademarks are property of their respective owners. More than just power.™
Rev. T1RM3F4080720
Installing Company: _____________________ Service Rep. Name: __________________________________________
Address: ________________________________________________________ Phone #: _________________________
Overview:
Altronix T1RM3F4 and T1RM3F4D rack kits are pre-assembled and consist of Trove1M1R enclosure/backplane with factory installed
Altronix power supply/charger and sub-assemblies. These kits also accommodate various combinations of Mercury boards for up to four (4)
doors in a single enclosure.
Configuration Chart:
Altronix
Model
Number
T1RM3F4
T1RM3F4D
120VAC 60Hz
P/S Input Current (A)
Power Supply Board
Input Fuse Rating
Power Supply Board
5A/
250V
10A/
32V
3.5
Nominal DC
Output Voltage
[DC] [Aux]
Battery Fuse Rating
24VDC
Output
Range (V)
24VDC
20.28-
26.4
20.28-
26.4
Maximum Supply
Current for Main and
Aux. Outputs on
Power Supply board,
PDS8(CB) Power
Distribution Module
and ACM4(CB) Access
Power Controller’s
Output
outputs (A)
Range (V)
24VDC @ 5.6A
Current Per
ACM4 Output (A)
Current Per
ACM4CB Output (A)
ACM4(CB) Board
Input Fuse Rating
ACM4 Board
Output Fuse Rating
ACM4CB Board
Output PTC Rating
Fail-Safe/Fail-Secure or
Dry Form “C” Outputs
(ACM4 Only)
PDS8 Board
Input Fuse Rating
PDS8 Board
Output Fuse Rating
PDS8CB Board
Input PTC Rating
10A/
3A/
2.5 –
– 2.0 – 2.5A – – 9A 2.5A
10A/
250V
32V
–
4
32V
3A/
32V
– –
PDS8 Board
Output Fuse Rating
Hardware and Accessories:
Spacer | 5/16” Pan Head Screw | Lock Nut
Specifications:
Agency Listings:
• CE European Conformity.
Mechanical:
• Black enclosure with ample knockouts for convenient access.
• Includes: tamper switch, cam lock and mounting hardware.
• Modular 2U standard EIA 19” drawer with
extendable slides up to 48”.
• Dimensions (H x W x D): 3.25” x 19.0” x 26.5”
(82.6mm x 482.6mm x 673.1mm).
Included Accessories:
• One (1) tamper switch (Altronix Model TS112 or equivalent).
• Cam lock.
Available Accessories (not included):
• RE2: Rack Mount Battery Enclosure
accommodates up to four (4) 12VDC/7AH batteries.
• WM5, WM25, WM100: Magnetic Cable Tie Mounts
(5, 25, 100 counts).
- 2 - T1RM3F4(D)
Assembling and Attaching Z Bracket Wire Management Accessory (included):
Altronix Trove Rack enclosures include Z Bracket, a convenient and reliable wire management accessory.
1. Carefully unpack Z Bracket. Do not discard hardware (included) (Fig. 1, pg. 3).
2. Attach arms to each other using bolts and lock nuts (Fig. 1a, pg. 3).
3. Attach the hinge brackets to the ends of arms using bolts and nuts positioning them as shown on Fig. 1b, pg. 3.
4. Make sure that all nuts are tightened.
Hardware (included):
Ten (10) bolts and eight (8) lock nuts
Fig. 1a
5. Attach the hinge bracket on the longer side of Z Bracket to the adjustable rail using bolts and lock nuts (included) (Fig. 2, 2a, pg. 3).
6. Attach the hinge bracket on the shorter side of Z Bracket to the rear of the rack enclosure using bolts (included).
Fig. 2
Fig. 1
Two (2)
Fig. 1b
Fig. 2a
T1RM3F4(D) - 3 -
Loading...