Altronix T1RAL3F8 Specsheet

T1RAL3F8

Trove / Altronix Kit

Access & Power Integration Solution

Description

Altronix T1R AL3F8 Trove™ Rack kit is pre-assembled and consists of

Trove1AL1R enclosure/backplane with the following factory installed

Altronix components:

- One (1) eFlow6NB - power supply/charger set at 24VDC;

- One (1) VR6 - Voltage Regulator;

- One (1) PDS8 - Fused Dual Output Power Distribution Module;

- One (1) ACMS8 - Fused Dual Output Access Power Controller.

Key Features

T1RAL3F8

- Output Power:

- Eight (8) individully selectable 12VDC or 24VDC fused lock
power outputs rated at 6A total max.

- Fire Alarm Disconnect is individually selectable by output.

- Eight (8) individully selectable 12VDC or 24VDC fused power
outputs rated at 6A max. for readers, REXs, controllers, etc.

- Power status LED on front panel.

- Includes cam lock, tamper switch and mounting hardware.

- Simplified board layout and wire management.

*Altronix Power Supply/Charger and Sub-Assemblies only

- 6’ IEC320 3-wire power cord.

- 2U drawer on extendable rails.

- Black powder coated steel enclosure.

- Convenient knockout configuration:

- Six (6) 1.25” diameter knockouts located on the back
of enclosure.

- Included Z Bracket facilitates ease of wiring.

- CE European Conformity.

- Lifetime Warranty* / Made in the U.S.A.

Optional Accessories

- RE2:
Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries.

- WM5, WM25, WM100:
Magnetic Cable Tie Mounts (5, 25, 100 counts).

Rev. T1RAL3F8 - 07272020

T1RAL3F8

Trove / Altronix Kit

Access & Power Integration Solution

Specifications

Power Supply/Charger (eFlow6NB):

Input

Voltage 120VAC, 60Hz, 3.5A max.
Main Fuse 5A / 250V.

Outputs

Voltage Factory set at 24VDC.
Current 6A continuous.

Maximum Supply Current for Main and Aux. Outputs on
eFlow6NB Power Supply board, ACMS8 Access Power Controller’s and
PDS8 Power Distribution Module’s outputs is 5.6A.

Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.

Filtered and regulated.

Battery Backup

Type Sealed lead acid or gel type.
Fuse Rating 10A @ 32VDC.
Failover Upon AC loss, instantaneous.

Fire Alarm Disconnect

Supervised Latching or non-latching.
EOL 10K Resistor.

Supervision

AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown

Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units. Prevents deep battery discharge.

Indicators (LED)

Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.

Power Distribution Module (PDS8):

Input

Voltage 24VDC from eFlow6NB and 12VDC from VR6.
Main Fuse 10A / 250V.

Outputs

Voltage 12 or 24VDC individually selectable.
Output Fuses 3A / 32VDC.

Indicators (LED)

DC Output Eight (8) individual output LEDs.
Green: 12VDC
Red: 24VDC.

Access Power Controller (ACMS8):

Input

Voltage 24VDC from eFlow6NB and 12VDC from VR6.
Main Fuse 15A / 32V.

Outputs

Voltage 12 or 24VDC individually selectable.
Eight (8) selectable 12VDC - 24VDC independently controlled

outputs or eight (8) indepently controlled Form “C” relay outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
c) Auxiliary power outputs (unswitched).
d) Any combination of the above.
Any of the eight (8) fuse protected power outputs are selectable
to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Output Fuses 2.5A / 32VDC.

Indicators (LED)

Red LEDs Outputs are triggered (relays energized).
Blue LED FACP disconnect is triggered.
Individual voltage LEDs

Green: 12VDC
Red: 24VDC.

T1RAL3F8 Kit:

Agency Listings

CE European Conformity.

Physical and Environmental:

Dimensions (H x W x D):

Modular 2U standard EIA 19” rack mount chassis.

3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm).

Weights:

Product 20 lbs. (9.07 kg).
Shipping 25 lbs. (11.34 kg).

Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).

Relative Humidity 85% +/-5%.
BTU/Hr.: 115 BTU/Hr.

Voltage Regulator (VR6):

Input

Voltage 24VDC from eFlow6NB.

Output

Voltage 12VDC.
Current 6A continuous.
Other Surge suppression.

Indicators (LED)

Input 24VDC is present.
Output Powered.