T1RAL13F8P8
Trove / Altronix Kit
Access & Power Integration Solution
Description
Altronix T1RAL13F8P8 Trove™ Rack kit is pre-assembled and consists of
Trove1AL1R enclosure/backplane with the following factory installed Altronix
components:
- One (1) eFlow6NB - power supply/charger set at 24VDC;
- One (1) eFlow4NB - power supply/charger set for 12VDC;
- One (1) ACM8 - Access Power Controller;
- One (1) PD8UL - Fused Power Distribution Module;
Key Features
T1RAL13F8P8
- Output Power:
- Eight (8) Fail Safe/Fail Secure outputs.
- Fire Alarm Disconnect is individually selectable by output.
- Eight (8) 12VDC fused power outputs rated at 4A max.
for readers, REXs, controllers, etc.
- Power status LED on front panel.
- Includes cam lock, tamper switch and mounting hardware.
- Simplified board layout and wire management.
- 6’ IEC320 3-wire power cord.
*Altronix Power Supply/Charger and Sub-Assemblies only
- 2U drawer on extendable rails.
- Black powder coated steel enclosure.
- Convenient knockout configuration:
- Six (6) 1.25” diameter knockouts located on the back
of enclosure.
- Included Z Bracket facilitates ease of wiring.
- CE European Conformity.
- Lifetime Warranty* / Made in the U.S.A.
Optional Accessories
- RE2:
Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries.
- WM5, WM25, WM100:
Magnetic Cable Tie Mounts (5, 25, 100 counts).
Rev. T1RAL13F8P8 - 06282020
T1RAL13F8P8
Trove / Altronix Kit
Access & Power Integration Solution
Specifications
Power Supply/Charger (eFlow6NB):
Input
Voltage 120VAC, 60Hz, 3.5A max.
Main Fuse 5A / 250V.
Outputs
Voltage set for 24VDC.
Current 6A continuous.
Maximum Supply Current for Main and Aux. Outputs on
eFlow6NB Power Supply board, ACM8 Access Power Controller
outputs is 5.6A.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.
Filtered and regulated.
Power Supply/Charger (eFlow4NB):
Input
Voltage 120VAC, 60Hz, 3.5A max.
Main Fuse 5A / 250V.
Outputs
Voltage set for 12VDC.
Current 4A continuous.
Maximum Supply Current for Main and Aux. Outputs on
eFlow6NB Power Supply board, ACM8 Access Power Controller
outputs is 5.6A.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.
Filtered and regulated.
Both Power Supplies:
Battery Backup
Type Sealed lead acid or gel type.
Fuse Rating 10A @ 32VDC.
Failover Upon AC loss, instantaneous.
Fire Alarm Disconnect
Supervised Latching or non-latching.
EOL 10K Resistor.
Supervision
AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown
Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units. Prevents deep battery discharge.
Indicators (LED)
Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.
Access Power Controller (ACM8):
Input
Voltage 24VDC from eFlow6NB.
Input Fuse 10A/32V.
Outputs
Voltage 24VDC.
Eight (8) independently controlled 2.5A outputs:
a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
b) Eight (8) dry form “C” 5A rated relay outputs.
c) Any combination of the above.
Eight (8) auxiliary power outputs (unswitched).
Outputs Ratings
Fuses 3A/32VDC.
Indicators (LED)
Red LEDs Outputs are triggered (relays energized).
Green LED FACP disconnect is triggered.
Power Distribution Module (PD8UL):
Input
Voltage 12VDC from eFlow4NB.
Outputs
Class 2 power-limited auto-resettable outputs.
Voltage 12VDC.
PTCs 2.5A.
Indicators (LED)
Green LED DC Output.
T1RAL13F8P8 Kit:
Agency Listings
CE European Conformity.
Physical and Environmental:
Dimensions (H x W x D):
Modular 2U standard EIA 19” rack mount chassis.
3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm).
Weights:
Product 20 lbs. (9.07 kg).
Shipping 25 lbs. (11.34 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr.: 115 BTU/Hr.
T1RAL13F8P8
1 2 3 4
ON
1 2 3 4
ON
Trove / Altronix Kit
Access & Power Integration Solution
To IEC connector
Altronix
PD8UL
FACP INTERFACE
NO C NC
+INP- T + RET-
1 2 3 4
ON
TRG
FACP
1 2 3 4
ON
1 2 3 4 5 6 7 8
P
MAIN
10A 250V
Altronix
ACM8
LED
INPUT
D1
R1
P N
FUSED POWER OUTPUTS
COMMON POWER OUTPUTS
N
Power Control
- + - +
To IEC connector
L G N
NC C NO
AC FAIL
NC C NO
BAT FAIL
AC
DCAC1
enable
2 hr.
disable
TRIGGER EOL
SUPERVISED
NO GND
RESET
+ AUX ---
L G N
Altronix
eFlow4NB
12VDC
OFF - 24V
ON - 12V
1 min
--- BAT + --- DC +
ON
Altronix
eFlow6NB
INPUT
TRIGGER
24VDC
5 6 7 8
IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND
1 2 3 4
F1 F2 F3 F4 F5 F6 F7 F8
NC C NO
AC FAIL
NC C NO
BAT FAIL
AC
DCAC1
1 min
enable
2 hr.
disable
TRIGGER EOL
SUPERVISED
NO GND
OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8
NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM
RESET
+ AUX ---
--- BAT + --- DC +
OFF - 24V
ON - 12V
ON
T1RAL13F8P8
Trove / Altronix Kit
Access & Power Integration Solution
26.5”
673.1mm
2.4”
61mm
4.57”
116.1mm
1” (25.4mm)
11.175” (283.8mm)
0.55” (14mm)
R 1.27” (32.3mm)
0.1”
2.5mm
3.62”
92mm
1.5”
38.1mm
3.25”
82.3mm
19” (482.6mm)
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Loading...