Altronix T1RAG3F8 Specsheet

T1RAG3F8

Trove / AMAG M4000 Kit

Access & Power Integration Solution

Description

Altronix T1RAG3F8 Trove™ Rack kit is pre-assembled and consists of

Trove1AG1R enclosure/backplane with the following factory installed

Altronix components:

- One (1) eFlow6NB - power supply/charger set at 24VDC;

- One (1) VR6 - Voltage Regulator;

- One (1) ACMS8 - Fused Dual Input/Output Access Power Controller;

This kit also accommodates various combinations of AMAG Symmetry

M4000 boards for up to eight (8) doors in a single enclosure.

Key Features

T1RAG3F8

- Output Power:

- Eight (8) 24VDC fused lock power outputs rated at 6A total max.

- Fire Alarm Disconnect is individually selectable by output.

- Accommodates the following AMAG Symmetry M4000 boards:
M4000-DEC4, M4000-IOC20/16.

- Power status LED on front panel.

- Simplified board layout and wire management.

- Convenient knockout configuration:

- Six (6) 1.25” diameter knockouts located on the back
of enclosure.

*Altronix Power Supply/Charger and Sub-Assemblies only

- 6’ IEC320 3-wire power cord.

- 2U drawer on extendable rails.

- Black powder coated steel enclosure.

- Included Z Bracket facilitates ease of wiring.

- Includes cam lock, tamper switch and mounting hardware.

- CE European Conformity.

- Lifetime Warranty* / Made in the U.S.A.

Optional Accessories

- RE2:
Rack Mount Battery Enclosure accommodates up to four (4) 12VDC/7AH batteries.

- WM5, WM25, WM100:
Magnetic Cable Tie Mounts (5, 25, 100 counts).

Rev. T1RAG3F8 - 07272020

T1RAG3F8

Trove / AMAG M4000 Kit

Access & Power Integration Solution

Specifications

Power Supply (eFlow6NB):

Input

Voltage 120VAC, 60Hz, 3.5A max.
Main Fuse 5A / 250V.

Outputs

Voltage Factory set at 24VDC.
Current 6A continuous.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.

Filtered and regulated.

Battery Backup

Type Sealed lead acid or gel type.
Fuse Rating 10A @ 32VDC.
Failover Upon AC loss, instantaneous.

Fire Alarm Disconnect

Supervised Latching or non-latching.
EOL 10K Resistor.

Supervision

AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown

Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units. Prevents deep battery discharge.

Indicators (LED)

Input 120VAC is present.
DC Output Powered.
Battery Discharged or not connected.

Voltage Regulator (VR6):

Input

Voltage 24VDC from eFlow6NB.

Output

Voltage 12VDC.
Current 6A continuous.
Other Surge suppression.

Indicators (LED)

Input 24VDC is present.
Output Powered.

Dual Input Access Power Controller (ACMS8):

Input

Voltage 24VDC from eFlow6NB and 12VDC from VR6.
Input Fuse 15A/32V.

Outputs

Voltage 12 or 24VDC individually selectable.
Eight (8) selectable 12VDC - 24VDC independently controlled

outputs or eight (8) indepently controlled Form “C” relay outputs:
a) Fail-Safe and/or Fail-Secure power outputs.
b) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.
c) Auxiliary power outputs (unswitched).
d) Any combination of the above.
Any of the eight (8) fuse protected power outputs are selectable

to follow power Input 1 or Input 2.
Individual outputs may be set to OFF position for servicing.
Output Fuses 3A/32VDC.

Indicators (LED)

Red LEDs Outputs are triggered (relays energized).
Blue LED FACP disconnect is triggered.
Individual voltage LEDs:

Green: 12VDC
Red: 24VDC.

T1RAG3F8 Kit:

Agency Listings

CE European Conformity.

Physical and Environmental:

Dimensions (H x W x D):
Modular 2U standard EIA 19” rack mount chassis.

3.25” x 19.0” x 26.5” (82.6mm x 482.6mm x 673.1mm).

Weights:

Product 20 lbs. (9.07 kg).
Shipping 25 lbs. (11.34 kg).

Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr.: 115 BTU/Hr.