Altronix T1PDK7F24 Specsheet

T1PDK7F24

Access & Power Integration Solution

Description

Altronix T1PDK7F24 kit consists of Trove1 enclosure, TPD1 PDK/Altronix backplane

with one (1) 24VDC @ 10A power supply/charger. This kit also accommodates up

to three (3) PDK PM-07-EIOE-E modules for up to twenty-four (24) doors in a single

enclosure. Trove simplifies board layout and wire management, reduces installation

time and labor costs.

Key Features

T1PDK7F24

- 24VDC power supply/charger.

- Accommodates up to three (3) PDK PM-07-EIOE-E modules.

- Convenient knockout configuration:

- Single 1.5” diameter knockout located top center of enclosure

- Nine (9) double knockouts (1” and 0.75”).

- 16 AWG galvanized steel backplane simplifies board layout
and wire management.

*Altronix Power Supply/Chargers and Sub-Assemblies only

Accessories (order separately)

LINQ2 - Network Supervision

Altronix LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN

- Remotely reports accurate power diagnostics

- Controls power and resets devices

- Reports system diagnostics via Email

LINQ2

WM5, WM25, WM100 - Magnetic Cable Tie Mounts

Altronix WM5, WM25, and WM100 are packs of 5, 25 or 100 magnetic cable tie mounts respectively.
They accommodate standard zip ties or velcro straps. These are ideal for wire management in our Trove series.

WM5

- Supervision

- AC Fail

- Low Battery and Battery Presence

- Low power shutdown.

- CE European Conformity.

- Enclosure accommodates up to two (2) 12VDC/7AH batteries.

- Lifetime Warranty* / Made in the U.S.A.

Mounting Magnet

MM4, MM8, MM12, MM24 - Magnetic Mounting Solution

Altronix mounting magnets accommodate screws and nylon standoffs to allow for mounting various boards/
accessories in any metal enclosure or backplane.

Rev. T1PDK7F24 - 06262020

T1PDK7F24

Access & Power Integration Solution

Specifications

Power Supply (eFlow104NB):

Input

Voltage 120VAC, 60Hz, 4.5A max.
Main Fuse 6.5A/250V.

Outputs

Voltage 24VDC.
Current 10A continuous.
Auxiliary Class 2 power-limited @ 1A (unswitched).
Other Overvoltage protection.

Filtered and regulated.

Battery Backup (not included)

Type Sealed lead acid or gel type.
Fuse Rating 10A @ 32VDC.
Failover Upon AC loss, instantaneous.

Fire Alarm Disconnect

Supervised Latching or non-latching.
EOL 10K Resistor.

Supervision

AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown

Shuts down DC output terminals if battery voltage drops below
70-75% for 24V units. Prevents deep battery discharge.

Indicators (LED)

Input 120VAC is present.
DC Output Powered.

T1PDK7F24 Kit:

Agency Listings

All components of this Trove kit are UL Listed sub-assemblies.
Please refer to the corresponding Sub-Assembly Installation Guides for
further information.

CE European Conformity.

Physical and Environmental

Dimensions (H x W x D)

18” x 14.5” x 4.62” (457.2mm x 368.3mm x 118.0mm).

Weight (approx.)
Product 15.5 lbs. (7.0 kg).
Shipping 19.5 lbs. (8.9 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr (approx.):

12VDC: 40 BTU/Hr.
24VDC: 77 BTU/Hr.