Altronix T1656 Installation Instructions

Open Frame Transformers

10 9 8 7 6

PRIMARY TERMINALS

SECONDARY TERMINALS

F

5 4 3 2 1

A

B

D

C

E

Specification Chart (all transformers listed are 120VAC input):

Model # Output Amp A B C D E F Approx. Ship Wt.

T1656 16VAC/56VA 3.50 2.75” 2.25” 1.87” 1.06” 3.75” 3.12” 1.4 oz.
T16100 16VAC/100VA 6.25 3.06” 2.56” 2.25” 1.31” 4” 3.625” 1.17 lbs.
T24130 24VAC/100VA 4.16 3.06” 2.56” 2.25” 1.31” 4” 3.625” 1.12 lbs.
T2856 28VAC/56VA 2.00 2.75” 2.25” 1.87” 1.06” 3.75” 3.12” 1.8 oz.
T2885 28VAC/100VA 4.16 3.57” 2.56” 2.25” 1.31” 4” 3.625” 1.12 lbs.

Installation Instructions:

1. Mount Transformer in desired location/enclosure.

2. Plug in the AC (120VAC 50 / 60 Hz) to an outlet.

Note: It is important to measure output voltage before connecting devices. This helps avoid potential damage.

3. Connect devices to secondary terminals on the transformer.

WARNING: This installation should be made by qualified service personnel and should
conform to all local codes and in accordance with the National Electrical Codes.

Fig. 1

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
website: www.altronix.com, e-mail: [e-mail], Made in U.S.A.
IITransformers - Rev. 110201

MEMBER