Altronix T16100 Installation Instructions

T16100 - Open Frame Transformer

PRIMARY - 115VAC 50/60Hz SECONDARY - 16VAC

5 4 3 2 1 10 9 8 7 6

F

A

B

D

C

E

Overview:

T16100 transformer converts 115VAC 50/60Hz to 16VAC for powering low voltage devices.
Maximum power output is rated @ 6.25 amp.

Specification Chart:

Model #

Input (Primary) Output (Secondary)

T16100

115VAC 50/60Hz (1 amp) 16VAC/100VA (6.25 amp)

Installation Instructions:

1. Mount transformer in desired location/enclosure (refer to Transformer Dimensions below).

2. Plug power cord into 115VAC 50/60 Hz receptacle.

3. Measure output voltage across the secondary leads which are connected to terminals 6 and 10 before
connecting devices. This helps avoid potential damage (open circuit voltage is approx. 16.8VAC @ 115VAC input)
(refer to Wiring Configuration below).

4. Connect 16VAC device(s) to the secondary leads which are connected to terminals 6 and 10
(refer to Wiring Configuration below).

WARNING: This installation should be made by qualified service personnel and should
conform to all local codes and in accordance with the National Electrical Codes.

Wiring Configuration:

Transformer Dimensions:

Model # A B C D E F Approx. Ship Wt.

T16100 3.125” 2.5625” 2.25” 1.3125” 4.0625” 3.5625” 3.3 lbs.

Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.

140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: [phone]
website: www.altronix.com, e-mail: [e-mail], Made in U.S.A.
IIT16100 - Rev. 061710 F25J