Altronix SMP3ET Specsheet

SMP3ET

Power Supply/Charger Kit

Description

Altronix SMP3ET power supply/charger converts a low voltage AC input into a 6VDC

or 12VDC output. This unit has a wide range of applications for access control,

security and CCTV system accessories that require additional power.

Specifications

Input

Voltage 16VAC from TP1640 plug-in transformer.

Outputs

Voltage 6VDC or 12VDC selectable.
Current 2.5A continuous max.
Other Short circuit and thermal overload protection.

Filtered and regulated.

Back-up Battery (not included)

Type Sealed lead acid or gel type.
Failover Upon AC loss, instantaneous.

Physical and Environmental

Dimensions (L x W x H)

8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm).

Product Weight 3.3 lbs. (1.5 kg).
Shipping Weight 3.8 lbs. (1.72 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr. (approx.):

6VDC: 8 BTU/Hr.
12VDC: 15 BTU/Hr.

Rev. SMP3ET-11282016

SMP3ET

Indicators (LED)

Input Input voltage is present.
DC Output Powered.

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA