Altronix SMP10PM12P16CB, SMP10PM12P4CB, SMP10PM12P8CB, SMP10PMC12X Specsheet
SMP10C12X Series
Power Supply/Chargers
Description
Altronix SMP10C12X series power supply/chargers convert a 115VAC, 50/60Hz
input into a single, four (4), eight (8) or sixteen (16) fuse/PTC protected outputs.
Outputs are 12VDC with a total of 10A max.
Key Features
- Available with 1, 4, 8 or 16 outputs
- Instantaneous transfer to stand-by batteries
SMP10PM12P4
- Fused or PTC ptotected outputs
- Supervision (where applicable, see Chart below):
- AC Fail
- Battery Fail and Low Battery
- Built-in charger for sealed lead acid or gel type batteries
SMP10C12X Series Power Supply Configuration Reference Chart
Accessory
Altronix
Model Number
SMP10C12X
SMP10C12XX
SMP10PMC12X
SMP10PMC12XX
SMP10PM12P4
SMP10PM12P4CB
SMP10PM12P8
SMP10PM12P8CB
SMP10PM12P16
SMP10PM12P16CB
Power
Distribution
Module(s)
- 1
PD4
PD4CB -
PD8
PD8CB -
PD16W
PD16WCB -
Number
of
Outputs
4
8
16
Fused
Outputs PTC Outputs
- Short circuit and overload protection
- Power On/Off switch
- Lifetime Warranty / Made in the U.S.A.
Individual
Output
Rating (A) Supervised
- -
- - Two (2) 12AH
- -
- - Two (2) 12AH
P
P
P
- 3.5A Two (2) 7AH
P
- 3.5A Two (2) 7AH
P
- 3.5A Two (2) 7AH
P
10A
2.5A Two (2) 7AH
2.5A Two (2) 7AH
2.5A Two (2) 7AH
-
P
115VAC
50/60Hz Input
Current (A)
1.45A 10A
12VDC
Total
Output
Current (A)
Accommodates
Batteries
Two (2) 7AH
Two (2) 7AH
Rev. SMP10C12X-01292016
SMP1012X Series
Power Supply/Chargers
Specifications
Input
Voltage 115VAC, 50/60Hz
Outputs
Voltage 12VDC
Current 10A @ 12VDC continuous max
Protection Fused 3.5A / PTC 2.5A
Other Overvoltage protection
Filtered and regulated
Back-up Battery (not included)
Capacity 7AH / 12VDC (1 within enclosure)
12AH / 12VDC (requires larger “X” enclosure)
40 AH / 65 AH (requires separate enclosure)
Type Sealed lead acid or gel type
Charging current 0.7A
Failover Upon AC loss, instantaneous
Supervision (where applicable)
AC Failure Form “C” contacts
Battery Low/Fail Form “C” contacts
Physical and Environmental
Dimensions (H x W x D)
SMP10C12X, SMP10PMC12X, SMP10PM12P4(CB),
SMP10PM12P8(CB), SMP10PM12P16(CB):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
SMP10C12XX, SMP10PMC12XX:
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)
Product Weight / Shipping (approx.)
Model Product Weight Shipping Weight
SMP10(PM)C12X 8.3 lbs. (3.76 kg) 9.3 lbs. (4.22 kg)
SMP10(PM)C12XX 9.4 lbs. (4.26 kg) 10.7 lbs. (4.85 kg)
SMP10PM12P4(CB) 8.5 lbs. (3.85 kg) 9.5 lbs (4.31 kg)
SMP10PM12P8(CB) 8.6 lbs. (3.90 kg) 9.6 lbs (4.35 kg)
SMP10PM12P16(CB) 8.8 lbs. (3.99 kg) 9.8 lbs. (4.44 kg)
Temperature
Operating 0 to 49º C (32 to 120º F)
Storage -20 to 70º C (-4 to 158º F)
Relative Humidity 85% +/-5%
BTU/Hr:
61.42 BTU/Hr.
Indicators (LED)
Input 115VAC is present
DC Output Powered
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
Loading...