Altronix RBSN Installation Manual
RBSN - Relay Module
NEG --
CNCNO
POS +CNCNO
J
3
NEG --
CNCNO
POS +CNCNO
TO BELL OUTPUT
+
--
J3
NEG --
CNCNO
POS +CNCNO
J1
CONSTANT
POWER
SOURCE
N.O. TRIP SWITCH
N.C.
RESET
SWITCH
+
--
USED TO
MAKE/
BREAK
LOAD
NEG --
CNCNO
POS +CNCNO
J1
TO BELL OUTPUT
TERMINALS OF CONTROL PANEL
IN COMING
TELEPHONE
LINE
HOUSE
PHONE
+
--
TO ALARM
TRANSMITTER
NEG --
CNCNO
POS +CNCNO
J1
TO BELL OUTPUT
TERMINALS OF CONTROL PANEL
+
--
TO PHONE LINE
PHONE LINE
POWER IN
Specifications:
• 12VDC or 24VDC selectable operation.
• Current draw 15mA.
• Factory set for 12VDC cut jumper J1 for 24VDC operation.
• DPDT contacts rated at 2 amp/120VAC/28VDC.
• Snap track mountable (order part # ST1).
Board dimensions (approximate): 2.625"L x 1.625"W x .875"H
Dry Contacts Polarity Reversal
Latching Dry Contacts
Line Seizure
Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: info@altronix.com, Lifetime Warranty, Made in U.S.A.
IIRBSN - Rev. 072004 G15J
MEMBER
Loading...