Altronix MAXFIT7FE, MAXFIT5FE, MAXFIT3FE Specsheet

MaxFit FE Series

Single P/S Expandable Power Systems

Description

Altronix MaxFit FE Single Power Supply Expandable Power Systems provide system

designers and installers with optimum power choices and the highest levels of ver-

satility in a more compact and economical enclosure. Units provide 12VDC or 24VDC

via single output power supply/charger and include AC fail, low battery, and battery

presence monitoring. Enclosure accommodates up to four (4) 12VDC/12AH batteries.

Key Features

MaxFit7FE

- Filtered and electronically regulated outputs.

- Additional aux. Class 2 power-limited output rated @ 1A.

- Thermal and short circuit protection with auto reset.

- Supervision

- AC Fail

- Low Battery and Battery Presence

- Low power shutdown.

- Supervised fire alarm disconnect.

MaxFit FE Series Power Supply Configuration Reference Chart

120VAC 60Hz
Altronix
Model Number

MaxFit3FE

MaxFit5FE

MaxFit7FE

Input

Current

3.5A 5A/250V 10A/32V 10.0-13.2 20.19-26.4 10.03-13.2 20.19-26.4 6A

3.5A 5A/250V 15A/32V 10.03-13.2 – 10.03-13.2 – 10A

4.5A 6.3A/250V 15A/32V – 20.17-26.4 – 20.17-26.4 10A

Input Fuse

Rating

Battery Fuse

Rating

12VDC Output

Range (V)

- Built-in 30-50% faster charger for sealed lead acid or
gel type batteries.

- Low power cutoff - protects stand-by batteries from
deep discharge.

- AC input and DC output LED indicators.

- Enclosure accommodates up to four (4) 12VDC/12AH batteries.

- Lifetime Warranty / Made in the U.S.A.

Nominal DC Output Voltage Options

[DC] [AUX]

24VDC Output

Range (V)

12VDC Output

Range (V)

24VDC Output

Range (V)

Maximum Supply

Current for Main

and Aux. Outputs

Rev. MaxFitFE - 101619

™

MaxFit FE Series

Single P/S Expandable Power Systems

Specifications

Input

Voltage 120VAC, 60Hz.
Fusing Varies, see Reference Chart.

Indicators (LED)

Input 120VAC is present.
DC Output Powered.

Outputs

Voltage 12VDC or 24VDC, see Reference Chart.
Current Varies, see Reference Chart.
Other Overvoltage protection.

Filtered and regulated.

Back-up Battery (not included)

Capacity 12AH / 12VDC (Up to 4 within enclosure).
40 AH / 65 AH (requires separate enclosure).

Type Sealed lead acid or gel type.
Fuse Rating Varies, see Reference Chart.
Failover Upon AC loss, instantaneous.

Fire Alarm Disconnect

Supervised Latching or non latching.
EOL 10K Resistor.

Supervision

AC Failure Form “C” contacts.
Battery Form “C” contacts.
Low DC Power Shutdown

Shuts down DC output terminals if battery voltage drops below
71-73% for 12V units and 70-75% for 24V units
(depending on the power supply). Prevents deep battery discharge.

Physical and Environmental

Dimensions (H x W x D)

20.5” x 16.5” x 6.25” (520.7mm x 419.1mm x 158.8mm).

Weight (approx.):

Model Product Weight Shipping Weight

MaxFit3FE 20.3 lb. (9.2 kg) 25.7 lb. (11.6 kg)
MaxFit5FE 20.3 lb. (9.2 kg) 25.7 lb. (11.6 kg)
MaxFit7FE 20.6 lb. (9.3 kg) 26 lb. (11.8 kg)

Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity 85% +/-5%.
BTU/Hr (approx.):

Model 12VDC 24VDC

MaxFit3FE 37 74
MaxFit5FE 61 N/A
MaxFit7FE N/A 123

Accessories

Network Supervision

Altronix model LINQ2 Network Communication Module provides remote supervision,

control and monitoring over LAN/WAN

- Remotely reports accurate power diagnostics

- Controls power and resets devices

- Reports system diagnostics via Email

phone: [phone] | fax: [phone] | email: [e-mail] | www.altronix.com

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA