Altronix HubWay8CDS Specsheet

HubWay®8CDS Passive UTP Transceiver Hub
with Integral Camera Power

Rev. DSHubWay8CDS - E18I

Overview

Altronix new HubWay8CDS Passive
UTP Transceiver Hub w/Integral
Camera Power transmits UTP
video, RS422/RS485 data and
power over a single CAT-5 or
higher structured cable.
Unit provides 8 camera channels in a space saving 1U EIA 19” rack
mount chassis which may be wall or shelf mounted. Video transmission range is up to 750 ft. max. per channel.
Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayDv or
HubWayDvi Video Balun/Combiners. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera
Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher
structured cable back to the HubWay8CDS. In addition, the HubSat4D provides power to these cameras locally to
eliminate the possibility of voltage drop associated with long cable runs.

Specifications

Input:

• 115VAC 60Hz, 1.5 amp.

• Primary fuse (internal) is rated at 5 amp/250V.

Video:

• Eight (8) channels of video over twisted pair
up to 750 ft.

• Eight (8) 75 ohm video outputs.

Data:

• RS422/RS485 data inputs.

Power:

• Individually selectable 24VAC or 28VAC
power outputs with OFF position.

• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.

• Class 2 Rated power limited outputs.

• PTCs are rated @ 1 amp per channel.

• Surge suppression.

Visual Indicators:

• AC input power indicator.

• Eight (8) power LED indicators.

Features:

• Illuminated master power disconnect circuit breaker
with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).

• Unit can be rack, wall or shelf mounted.

• 1U rack mount chassis for use in standard
EIA 19” rack.

Optional Accessories:

• HubSat4 allows transmission of up to four (4)
video signals over a single CAT-5 or higher
structured cable.

• Video Balun/Combiners:

- HubWayAv - for use with 24VAC cameras.

- HubWayDv - for use with 12VDC cameras.

- HubWayDvi - for use with 12VDC

cameras without isolation.

Shipping Weight (approximate):

- HubWay8CDS: 11.7 lbs.

- HubWay82CDS: 12.4 lbs.

- HubWay83CDS: 12.9 lbs.

HubWay8CDS

Eight (8) Channel Passive UTP Transceiver
Hub with Integ

HubWay82CDS

Eight (8) Channel Passive UTP Transcei
eight (8) HubWayAv Video Balun/Combiners

UL Listed for Commercial CCTV Equipment
(UL 2044).

ral Camera Power

ver with

Models

HubWay83CDS

Eight (8) Channel Passive UTP Transceiver with
eight (8) HubW

Agency Appr

yDv Video Balun/Combiners

a

ovals

CUL Listed - CSA Standard C22.2 No.1-04,
Audio, Video and Similar Equipment.

1.625"

8.5"

.75"

19.125"

17.625"

ACPOWER

87654321

24VAC

OFF

2

8VAC

--DATA +

1

234

5678

CH 1-4

CH 5-8

1

-8

Video Balun/Combiners

HubWayAv

• Compatible with HubWay
HubWay

®

LD and HubSat®UTP
Transceiver Hubs for use with
24VAC cameras.

1U EIA 19” Rack Mount Chassis Mechanical Drawing & Dimensions:

®

,

• Compatib
HubWay

le with HubWay

®

LD and HubSat®UTP

®

,

Transceiver Hubs for use with
12VDC cameras.

HubWayDv

HubWayDvi

• Compatib
HubWay

le with HubWay

®

LD and HubSat®UTP

®

,

Transceiver Hubs for use with
12VDC cameras without isolation.

1.625”H x 19.125”W x 8.5”D

REAR

TOP & BOTTOM

FRONT

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com