Altronix HubSat42WPI, HubSat4WPI Specsheet
HubSat4WPi - Passive UTP Transceiver Hub
with Integral Isolated Camera Power
Overview
Altronix HubSat4WPi Outdoor Passive UTP Transceiver Hub w/Integral
Isolated Camera Power transmits UTP video, RS422/RS485 data and power
over a single CAT-5 or higher structured cable. Unit provides 4 camera channels
in a wall mount enclosure. Video transmission range is up to 750 ft. max. per
channel. Units are compatible with AC and/or DC fixed or PTZ cameras when
utilizing Altronix HubWayAv or HubWayDv Video Balun/Combiners. In addition, the unit features 24VAC or 28VAC PTC protected isolated outputs and
surge suppression. Optionally, the HubSat4WP can be used as an accessory
module to transmit video from up to 4 cameras over a single CAT-5 or higher
structured cable back to the HubWay, HubWayLD or HubWayLDH Passive and
Active UTP Transceiver Hubs. In addition, the HubSat4WPi powers these
cameras locally to eliminate the possibility of voltage drop associated
with long cable runs.
Specifications
Rev. DSHubSat4WPi - H17J
Input:
• 115VAC 50/60Hz, 1.25 amp.
• Primary fuse is rated at 3.5 amp/250V.
Video:
• Four (4) channels of video over twisted pair
up to 750 ft.
• Four (4) 75 ohm video outputs.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power
outputs with OFF position.
• Unit provides up to 1 amp max. per channel not to
exceed a total of 4 amp (100VA) maximum current.
• Electronically isolated camera power.
• Class 2 Rated power limited outputs.
• PTC protected outputs.
• PTCs are rated @ 1 amp per channel.
• Surge suppression.
HubSat4WPi
Outdoor Passive UTP Transceiver Hub with Integral
Isolated Camera P
included.
HubSat42WPi
Outdoor Passi
Isolated Camera Power includes four (4) HubWayAv
Video Balun/Combiners.
ower. Video Balun/Combiners not
ve UTP Transceiver Hub with Integral
Visual Indicators:
• Four (4) individual power LED indicators.
Features:
• Wall mount enclosure.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with 12VDC
cameras without isolation.
Enclosure:
• NEMA4 / IP65 Rated.
• Enclosure dimensions:
12”H x 8”W x 6”D
Shipping Weight (approximate):
- HubSat4WPi: 13.75 lbs.
- HubSat42WPi: 14.5 lbs.
- HubSat43WPi: 15.0 lbs.
Models
HubSat43WPi
Outdoor Passive UTP Transceiver Hub with Integral
Isolated Camera P
Video Balun/Combiners.
ower includes four (4) HubWayDv
CE Approved.
Agency Approvals
0.75"
0.75"
11.25"
12.00"
10.00"
8.77"
8.00"7.40"
0.50"
2.00"
0
.77"
6.00"
Vidoe Balun/Combiners
HubWayAv
• Compatib
HubWay
le with HubWay®,
®
LD and HubSat®UTP
Transceiver Hubs for use with
24VAC cameras.
HubW
ayDv
• Compatib
HubWay
le with HubWay®,
®
LD and HubSat®UTP
Transceiver Hubs for use with
12VDC cameras.
Enclosure Dimensions
12”H x 8”W x 6”D
HubW
ayDvi
• Compatib
HubWay
le with HubWay®,
®
LD and HubSat®UTP
Transceiver Hubs for use with
12VDC cameras without isolation.
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Loading...