Altronix BR1 Installation Guide

BR1

Sub-Assembly Mounting Bracket

Altronix BR1 mounting bracket is compatible with Altronix Maximal and Trove enclosures. It allows to mount
one (1) PD4UL(CB), PD8UL(CB), ACM4(CB), MOM5, VR6, PDS8, NetWay5B or LINQ8PD(CB) sub-assem­bly on the enclosure’s inside wall, saving valuable space.

Features:

Overview:

• 16 gauge powder coated steel bracket.

• Mounting hole and screw for enclosure’s inside wall placement.

• Mounting pems to accommodate one (1) Altronix sub-assembly.

• Mounting hardware included.

Installation Instructions:

1. Fasten standoffs (provided) to pems on the bracket (Fig. 1, pg. 1).

2. Mount sub-assembly to standoffs utilizing 5/16” pan head screws (provided) (Fig. 2, pg. 1).

3. Place BR1 in the selected place on the wall of the enclosure (Fig. 3, pg. 1).

4. Secure it in place with the included set screw (Fig. 4, pg. 2).

5. Perform all necessary connections after the bracket with sub-assembly is firmly secured.

Fig. 1

Fig. 2 Fig. 3

BR1 - 1 -

Fig. 4

Altronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [e-mail] | Made in U.S.A.
IIBR1 E20S

- 2 - BR1

MEMBER