How it Works
Altronix
Loading...
ALTV248175UL
Data Sheet
2 pgs140.89 Kb0
Installation Guide
12 pgs1.05 Mb0
Installation Manual
12 pgs246.29 Kb0
Installation Manuals
16 pgs1.05 Mb0
Installation Manuals
12 pgs790.92 Kb0

Altronix ALTV248175UL, ALTV248175ULCB, ALTV248300UL, ALTV248300ULCB, ALTV248300ULCBM Installation Guide

...
Download
Page 1
ALTV248UL Series
CCTV Power Supplies
Installation Guide
Models Include:
• ALTV248UL • ALTV248ULCB
- 24VAC @ 3.5A (85VA) - 24VAC @ 3.5A (85VA) or 28VAC @ 3A (85VA). or 28VAC @ 3A (85VA).
- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.
- 24VAC @ 7A (175VA) - 24VAC @ 7A (175VA) or 28VAC @ 6.25A (175VA). or 28VAC @ 6.25A (175VA).
- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.
- 24VAC @ 12.5A (300VA) - 24VAC @ 12.5A (300VA) or 28VAC @ 10A (280VA). or 28VAC @ 10A (280VA).
- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.
• ALTV248300ULM • ALTV248300ULCBM
- 24VAC @ 12.5A (300VA) - 24VAC @ 12.5A (300VA) or 28VAC @ 10A (280VA). or 28VAC @ 10A (280VA).
- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.
- 24VAC @ 25A (600VA) - 24VAC @ 25A (600VA) or 28VAC @ 20A (560VA). or 28VAC @ 20A (560VA)
- Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.
Rev. 040506
Page 2
Overview:
ALTV248UL Series CCTV Power Supplies provide 24VAC or 28VAC distributed via eight (8) fuse or PTC protected outputs for powering CCTV cameras, heaters, and other video accessories.
Eight (8) Output ALTV248UL Series Reference Chart:
Altronix Model Number
Output Voltage
Total Output Current
(Power)
Number of Outputs
PTC Protected Outputs
(Class 2 Rated power-
limited for Dry locations,
Class 3 for Wet locations)
Fuse Protected
Class 1 Outputs
Individual Output Current
(max per output, not to
exceed total output current)
Fuse Ratings
Main Fuse Ratings
Primary In-line Fuse
Ratings
115VAC 60Hz
Input Current
Agency
Listings
ALTV248UL
ALTV248ULCB
ALTV248175UL
ALTV248175ULCB
ALTV248300UL
ALTV248300ULCB
ALTV248300ULM
24VAC 3.5A
28VAC 3A
24VAC 3.5A
28VAC 3A
24VAC 7A
28VAC 6.25A
24VAC 7A
28VAC 6.25A
24VAC 12.5A
28VAC 10A
24VAC 12.5A
28VAC 10A
24VAC 12.5A
28VAC 10A
8 ---
8
8 ---
8
8 ---
8
8 ---
P
P
P
P
3.5A 3.5A
--- 2.5A ---
P
3.5A 3.5A
--- 2.5A ---
P
3.5A 3.5A
--- 2.5A ---
P
3.5A 3.5A
5A/
250V
5A/
250V
10A/
250V
10A/
250V
15A/
32V
15A/
32V
15A/
32V
3.5A/ 250V
3.5A/ 250V
3.5A/ 250V
3.5A/ 250V
1.76A
1.76A
--- 2.7A
--- 2.7A
0.9A
0.9A
2.7A
ALTV248300ULCBM
ALTV248600UL
ALTV248600ULCB
24VAC 12.5A
28VAC 10A
24VAC 25A
28VAC 20A
24VAC 25A
28VAC 20A
8
8 ---
8
P
P
--- 2.5A ---
P
3.5A 3.5A
--- 2.5A ---
15A/
32V
15A/
32V
15A/
32V
--- 2.7A
--- 5.4A
--- 5.4A
- 2 - ALTV248ULseries
Page 3
Specifications:
Agency Listings:
• UL Listed for Commercial CCTV Equipment (UL 2044). CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment.
• CE European Conformity
Input:
• 115VAC, 50/60Hz.
Output:
• Eight (8) fuse protected outputs.
• 24VAC or 28VAC output
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Surge suppression.
Features:
• AC power LED indicator.
• Power ON/OFF switch (ALTV248UL, ALTV248ULCB).
Features (cont’d):
• Illuminated power disconnect circuit breaker with manual reset (all other models).
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates costly labor.
• Spare fuses included (on fuse protected models).
Enclosure Dimensions (H x W x D):
• ALTV248UL and ALTV248ULCB:
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
• ALTV248300ULM and ALTV248300ULCBM:
8.5” x 7.5” x 3.75” (215.9mm x 190.5mm x 97.9mm).
• ALTV248175UL, ALTV248175ULCB, ALTV248300UL and ALTV248300ULCB: 12” x 7.5” x 4.5” (304.8mm x 190.5mm x 114.3mm).
• ALTV248600UL and ALTV248600ULCB:
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm).
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only.
1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the two upper screws, level and secure. Mark the position of the lower two holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s upper keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws (Enclosure Dimensions, pg. 11, 12). Secure enclosure to earth ground.
2. Set power switch on power distribution board marked [PD] to OFF position for models ALTV248UL or ALTV248ULCB (Figs. 1a, 2a, pg. 5). Set power disconnect circuit breaker to OFF position for all other models (Figs. 3a-10a, pgs. 6-10).
3. All units are factory set for 24VAC operation. For 28VAC operation adjust unit prior to mounting and applying power as follows: Change the wire position so that the wire marked [28V] is connected to the terminal marked [P] and the wire marked [24V] is connected to the terminal marked [S].
Note: ALTV248ULCB set for 28VAC operation is not Class 2 Rated, not power-limited.
4. Connect AC power to the black and white flying leads of the transformer(s) (Figs. 1-10, pgs. 5-10), secure green lead to earth ground. Use 18 AWG or larger for all power connections. Keep power-limited (PTC protected outputs only) wiring separate from non power-limited wiring.
Minimum 0.25” spacing must be provided. Use separate knockouts.
5. Set power switch on power distribution board marked [PD] to ON position for models ALTV248UL or ALTV248ULCB (Figs. 1a, 2a, pg. 5). Set power disconnect circuit breaker to RESET (ON) position for all other models (Figs. 3a-10a, pgs. 6-10).
6. Measure output voltage before connecting devices. This helps avoiding potential damage. Terminals marked [1P - 8P] are of the same polarity. CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting the output voltage.
7. Set power switch on power distribution board marked [PD] to OFF position for models ALTV248UL or ALTV248ULCB (Figs. 1a, 2a, pg. 5). Set power disconnect circuit breaker to OFF position for all other models (Figs. 3a-10a, pgs. 6-10).
8. Connect devices to terminals marked [1P - 1N] through [4P - 4N] on PD4/PD4CB board (Figs. 9, 10, pgs. 9, 10) or terminals marked [1P - 1N] through [8P - 8N] on PD8/PD8CB board (Figs. 1-8, pgs. 5-8), carefully observing polarity.
9. Set power switch on power distribution board marked [PD] to ON position for models ALTV248UL or ALTV248ULCB (Figs. 1a, 2a, pg. 5). Set power disconnect circuit breaker to RESET (ON) position for all other models (Figs. 3a-10a , pgs. 6-10).
10. Green LED will illuminate when power is present.
11. Upon completion of wiring, secure enclosure door with screws (supplied). Installation of cam lock is optional. Caution: Equipment to be installed/serviced by authorized/trained personnel only. Shut branch circuit power before installing/servicing equipment.
ALTV248ULseries - 3 -
Page 4
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This installation should be made by qualified service personnel and should conform to the National Electrical Code and all local codes. Use 75º C or higher rated UL insulated wiring for connecting the unit to the mains. Replace fuses with the same type and rating (Eight (8) Output ALTV248UL Reference Chart, pg. 2).
Terminal Identification:
PD4 - Power Distribution Module
Terminal Legend Function/Description
1P - 4P AC output 1N - 4N AC output
PD8 - Power Distribution Module
Terminal Legend Function/Description
1P - 8P AC output 1N - 8N AC output
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure. There are no user serviceable parts inside. Refer servicing to qualified service personnel.
- 4 - ALTV248ULseries
Page 5
Fig. 1
s
ALTV248UL
24VAC or 28VAC output 1 (Follow
ame procedure using terminals 2P & N through 8P & N outputs 2 through 8)
Primary
In-line
Fuse
FUSED POWER OUTPUTS
COMMON POWER OUTPUTS
Class 1 Outputs
non-power
limited
XFMR
NPS
White Lead
Black Lead
MAIN FUSE
ON OFF
non-power limited
115VAC Input,
Black Lead
60 Hz.
Green
Lead
(Ground)
Fig. 1a
ON OFF
Back Panel of Enclosure
Fig. 2
ALTV248ULCB
F1 F2 F3 F4 F5 F6 F7 F8
24VAC or 28VAC output 1 (Follow same procedure using terminals 2P & N through 8P & N outputs 2 through 8)
Primary
In-line
Fuse
P
FUSED POWER OUTPUTS
N
COMMON POWER OUTPUTS
24VAC configuration Class 2 Not Wet/Class 3 Wet 28VAC configuration Class 1
non-power
limited
D1
R1
NPS
FUSE
MAIN
LED
INPUT
non-power limited
Black Lead
ON OFF
Black Lead
115VAC Input,
60 Hz.
XFMR
White Lead
Green
Lead
(Ground)
Fig. 2a
ON OFF
Back Panel of Enclosure
ALTV248ULseries - 5 -
Page 6
s
Fig. 3
ALTV248175UL
Fig. 4
ALTV248175ULCB
24VAC or 28VAC output 1 (Follow
ame procedure using terminals 2P & N through 8P & N outputs 2 through 8)
115VAC input
60 Hz
FUSED POWER OUTPUTS
COMMON POWER OUTPUTS
Black Lead
Class 1 Outputs
White Lead
NPS
XFMR
MAIN FUSE
non-power limited
Fig. 3a
Illuminated Power Disconnect
Circuit Breaker with manual reset
Green
Lead
(ground)
F1 F2 F3 F4 F5 F6 F7 F8
FUSE
MAIN
Fig. 4a
24VAC or 28VAC output 1 (Follow same procedure using terminals 2P & N through 8P & N outputs 2 through 8)
115VAC input
- 6 - ALTV248ULseries
60 Hz
P
FUSED POWER OUTPUTS
N
COMMON POWER OUTPUTS
Black Lead
Class 2 Not Wet/Class 3 Wet
White Lead
NPS
XFMR
D1
R1
LED
INPUT
non-power limited
Illuminated Power Disconnect
Circuit Breaker with manual reset
Green
Lead
(ground)
Page 7
s
Fig. 5
ALTV248300UL
24VAC or 28VAC output 1 (Follow
ame procedure using terminals 2P & N through 8P & N outputs 2 through 8)
115VAC input
60 Hz
P
FUSED POWER OUTPUTS
N
COMMON POWER OUTPUTS
Class 1 Outputs
White Lead
D1
R1
NPS
LED
INPUT
non power­limited
MAIN FUSE
Fig. 5a
Illuminated Power Disconnect
Circuit Breaker with manual reset
XFMR*
Green
Lead
(ground)
Fig. 6
ALTV248300ULCB
24VAC or 28VAC output 1 (Follow same procedure using terminals 2P & N through 8P & N outputs 2 through 8)
non-power
Class 2 Not Wet/Class 3 Wet
limited
Fig. 6a
Illuminated Power Disconnect
Circuit Breaker with manual reset
115VAC input
60 Hz
White Lead
XFMR*
Green
Lead
(ground)
ALTV248ULseries - 7 -
Page 8
p
Fig. 7
p
ALTV248300ULM
Transformer
underneath
ower supply
board
XFMR*
MAIN FUSE
Fig. 7a
Illuminated Power Disconnect
Circuit Breaker with manual reset
INPUT
LED
D1
R1
1 2 3 4 5 6 7 8
FUSED POWER OUTPUTS
P
N
NPS
Black Lead
White
COMMON POWER OUTPUTS
Lead
115VAC Input,
60 Hz.
Fig. 8
Fig. 8a
ALTV248300ULCBM
Illuminated Power Disconnect
Circuit Breaker with manual reset
MAIN
FUSE
INPUT
LED
D1
R1
Transformer
underneath
ower supply
board
XFMR*
F1 F2 F3 F4 F5 F6 F7 F8
FUSED POWER OUTPUTS
P
NPS
Black Lead
115VAC Input,
White
Lead
COMMON POWER OUTPUTS
60 Hz.
N
- 8 - ALTV248ULseries
Page 9
Fig. 9
ALTV248600UL
Connected
to Door
Class 1 outputs
24VAC or 28VAC fused ( Follow same procedure using terminals 2P & N thru 4P & N outputs 2 thru 4).
NPS
MAIN FUSE
INPUT
NPS
Fig. 9a
Green
Lead
(Ground)
115VAC input,
60 Hz.
Black
Lead
White
Lead
INPUT
non power-limited
XFMR*
non power-limited
MAIN FUSE
non power-limited
XFMR*
Illuminated Power Disconnect
Circuit Breaker with manual reset
ALTV248ULseries - 9 -
Page 10
Fig. 10
ALTV248600ULCB
24VAC or 28VAC output 1 (Follow same procedure using terminals 2P & N through 4P & N outputs 2 through 4)
Connected
Green
Lead
(Ground)
to Door
24VAC configuration Class 2 Not Wet/Class 3 Wet
115VAC input,
60 Hz.
Black
Lead
White
Lead
NPS
INPUT
non power-limited
XFMR*
non power-limited
INPUT
NPS
non power-limited
XFMR*
Fig. 10a
Illuminated Power Disconnect
Circuit Breaker with manual reset
- 10 - ALTV248ULseries
Page 11
7.25”
Enclosure Dimensions (H x W x D) for:
3.63”
(
184.15mm
)
• ALTV248UL • ALTV248ULCB
8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm)
(184.15mm)
3.625”
(184.15mm)
1.25”
(31.75mm)
(88.9mm)
3.5”
1.25”
(31.75mm)
2”
(50.8mm)
2”
(50.8mm)
8.125”
(206.375mm)
Enclosure Dimensions (H x W x D) for:
• ALTV248300ULM • ALTV248300ULCBM
8.5” x 7.5” x 3.75” (215.9mm x 190.5mm x 97.9mm)
0.6”
(15.24mm)
1.125”
(28.575mm)
(25.4mm)
0.6”
(15.24mm)
1”
(25.4mm)
(15.24mm)
1.125”
(28.575mm)
1”
(25.4mm)
0.6”
(15.24mm)
1”
(25.4mm)
0.6”
3.5”
(88.9mm)
1.25”
(31.75mm)
6.05”
(153.67mm)
1”
6.05”
(153.67mm)
1”
(25.4mm)
5.25”
(133.35mm)
(92.2mm)
1.25”
(31.75mm)
3.85”
(97.79mm)
(25.4mm)
8.13”
(206.5mm)
(25.4mm)
1”
1”
1.25”
(31.75mm)
1.25”
(31.75mm)
3.85”
(97.79mm)
0.6”
(15.24mm)
0.9”
(22.86mm)
0.6”
(15.24mm)
1”
(25.4mm)
7.25”
(184.15mm)
7.25”
0.6”
(15.24mm)
0.6”
(15.24mm)
0.9”
(22.86mm)
(206.5mm)
(97.79mm)
1”
(25.4mm)
1”
(25.4mm)
8.13”
3.85”
1.25”
(31.75mm)
1”
(25.4mm)
1.75”
(44.45mm)
1”
(25.4mm)
ALTV248ULseries - 11 -
Page 12
(
)
(
)
(
)
Enclosure Dimensions (H x W x D) for:
• ALTV248175UL • ALTV248175ULCB
• ALTV248300UL • ALTV248300ULCB
12” x 7.5” x 4.5” (304.8mm x 190.5mm x 114.3mm)
7.5”
(190.5mm)
4.5”
(114.3mm)
1.25”
(31.75mm)
1.5”
(12.7mm)
3.5”
(88.9mm)
12”
(304.8mm)
2.5”
(63.5mm)
3.5”
(88.9mm)
1”
(25.4mm)
Enclosure Dimensions (H x W x D) for:
• ALTV248600UL • ALTV248600ULCB
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.55mm)
4.5”
(114.3mm)
0.5”
(12.7mm)
1.11”
(28.19mm)
(25.4mm)
1.40”
(36mm)
4.5”
(114.3mm)
1.40”
(36mm)
1.25”
(31.75mm)
(31mm)
1.20”
1.5”
(12.7mm)
3.5”
(88.9mm)
5.88”
(149.35mm)
1.13”
(28.7mm)
3.25”
(83mm)
12”
(304.8mm)
0.5”
(12.7mm)
1.11”
(28.19mm)
7.5”
(190.5mm)
4.5”
(114.3mm)
1”
4.85”
(123mm)
5.75”
(146.05mm)
0.88”
(22.35mm)
0.88”
(22.35mm)
1”
(25.4mm)
4.85”
(123mm)
12.5”
(318mm)
11.0”
(279mm)
10.5”
267mm
0.75”
(19mm)
1.0”
25mm
1.0”
(25mm)
0.9375”
(24mm)
0.9375” (24mm)
3.25”
(83mm)
3.25”
(83mm)
1.20”
(31mm)
1.40”
(36mm)
5.10”
(130mm)
6.5625”
(167mm)
1.40”
(36mm)
5.10”
(130mm)
5.10”
(130mm)
1.20”
(31mm)
3.25”
(83mm)
(330mm)
1.0”
(25mm)
0.75”
(19mm)
13.0”
1.0”
25mm
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056 web site: www.altronix.com, e-mail: info@altronix.com. Lifetime Warranty, Made in U.S.A. II1ALTV248ULSeries B17P
MEMBER
- 12 - ALTV248ULseries
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use