HALO HEAT… a controlled, uniform heat source that gently surrounds foods
for better appearance, taste, and longer holding life.
Retains product moisture and color with no transfer of flavors.
Designed to accept standard steam table (gastronorm) pans.
Holds and transports food at proper temperatures.
Fully insulated for heat retention during transport.
Product moisture is retained without adding water.
Holds meats, poultry, fish, potatoes, casseroles, vegetables, biscuits, rolls, etc.
Non-magnetic stainless steel interior resists corrosion.
ON/OFF Adjustable thermostat.
Holding temperature gauge monitors inside air temperature.
Two carrying handles on each side of cabinet for
easy lifting.
Stackable design adds convenience
— saves space.
Optional caster stand assembly provides
additional mobility.
Low energy usage.
500-E
MODEL 500-E/HD
MODEL 500-E/Deluxe
#19
Catering Warmers
Solid state electronic control option simplifies
temperature setting, has a clear, easy-to-read
LED display, and is adjustable in increments
of 1 degree.
Electronic Control Option
(W x D x H)
MODEL 500-E
PRODUCT
CAPACITY
INTERIOR
INSIDE
DIMENSIONS
PAN
CAPACITY
ELECTRICAL
WEIGHT
OPTIONS &
ACCESSORIES
STACKABLE DESIGN
500-E/HD stacked height is 38-1/8" (968mm).
There are four (4) 3/16" (c. 5mm) rounded projections
on the top and bottom of each cabinet to permit stacking
without additional hardware.
500-E/Deluxe stacked height is 40-1/16" (1018mm).
A center support stacking hardware kit must be used to
stack the deluxe cabinets
. . . . . . . . . . . . .E5091
Optional transport latches can be ordered to secure
cabinets together for transport. For each pair of cabinets
to be secured, order one (1) set of two (2)
transport latches . . . . . . . . . . . . . . . . .LT-2035
Sizes and Specifications
Up to approximately 43-1/2 qts (42 liters) max.
22 gauge non-magnetic (non-corrosive) stainless steel
— Three (3) sets of stainless steel pan slide supports spaced at
4-3/8" (111mm) centers
500-E/HD: 13-1/4" x 21-1/2" x 14" (337mm x 546mm x 356mm)
500-E/Deluxe: 13-1/8" x 21-1/2" x 13-13/16" (333mm x 547mm 351mm)
STANDARD:
FULL SIZE PANS: GASTRONORM:
— Three (3) 12" x 20" x 4" (1/1: 530 x 325 x 100mm)
ONE-HALF SIZE PANS:
— Six (6) 12" x 10" x 4" (1/2: 265 x 325 x 100mm)
OPTION:
FULL SIZE PANS: GASTRONORM:
— Four (4) 12" x 20" x 2-1/2" (1/1: 530 x 325 x 65mm)
ONE-HALF SIZE PANS:
— Eight (8) 12" x 10" x 2-1/2" (1/2: 265 x 325 x 65mm)
One (1) set of #11002 Pan Slide Supports must be ordered for
placement in the center slide support position. These slide supports
adjust the pan positions to 3" (76mm) centers to accommodate
2-1/2" (64mm) deep pans.
125 V.A.C. - 50/60 Hz, 1ph
500 Watts, 4.0 Amps
208-240 V.A.C. - 50/60 Hz,1ph
1050 Watts (max.), 4.4 Amps (max.)
230 V.A.C. - 50/60 Hz, 1ph
1000 Watts, 4.3 Amps (500-E/HD)
230 V.A.C. - 50/60 Hz, 1ph
750 Watts, 3.3 Amps (500-E/Deluxe)
500-E/HD 59 lb (27 kg) NET 68 lb (31 kg) SHIP
500-E/Deluxe 76 lb (34 kg) NET 85 lb (39 kg) SHIP
NEMA 6-15P
15A-250V Plug
CEE 7/7
220-230V Plug
CEE 7/7
220-230V Plug
NEMA 5-15P
15A-125V Plug
500-E/HD Warmer
Single compartment holding cabinet with
22 gauge non-magnetic stainless steel exterior
and door. The door is furnished with one (1)
magnetic door latch with positive catch. The cabinet
is controlled by one (1)
ON/OFF adjustable thermostat,
60° to 200°F (16° to 93° C); includes one (1) indicator
light; and one (1) holding temperature gauge to monitor
interior air temperature. The cabinet interior includes
three (3) sets of pan slide supports attached directly to
the inside walls of the cabinet. Standard pan slide
supports are designed to accommodate 4" (102mm) deep
full-size pans (GN 1/1). The exterior cabinet is furnished
with four (4) carrying handles.
HALO HEAT COOK/HOLD/SERVE SYSTEMS
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.
PHONE: 262.251.3800 FAX: 262.251.7067 800.329.8744 U .S .A . ONLY WEBSITE:
800.558.8744 U .S .A ./CANADA 262.251.1907 INTERNATIONAL DIVISION www.alto-shaam.com
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
PRINTED IN U
. S. A.
#19 - 08/05
500-E/HD
500-E/Deluxe
500-E/Deluxe
is equipped with the same features as
Model 500-E/HD, with a window in the
door and an electronic control
configuration. Included is one (1)
ON/OFF
power switch; solid state control with
4-digit LED display, up and down arrow
keys for temperature adjustment and
indicator lights.
Minimum clearances are required for proper air ventilation including
3-inches (76mm) at the back, 2-inches (51mm) at the top, and 1-inch (25mm) at both sides.
On site venting for proper airflow must also be provided for built-in installations.
Clearance:
500-E 500-E/Deluxe
Casters*, 3" (76mm) (4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14227*
Casters*, 5" (127mm) (4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4007*
Caster Stand Assembly with 5" (127mm) casters (4) . .15377 . . . . . . . . . . . .
Legs*, 6" (152mm) (4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5205*
Leg Stand Assembly, with 6" (152mm) legs (4) . . . . .15378 . . . . . . . . . . . .
Pan Slide Support (2
REQUIRED) . . . . . . . . . . . . . . . .11002 . . . . . . . . . . . .
Shelf, chrome plated wire . . . . . . . . . . . . . . . . . .SH-2107 . . . . . . . . . . . .
Stand Base Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-5089*
Stacking Hardware (
CENTER SUPPORT, BETWEEN UNITS) . . . . . . . . . . . . .E-5091
Transport Door Latches (
FACTORY INSTALLATION) . . .LT-2035 . . . . . . . . . . . .
*stand base assembly must be ordered when ordering casters or legs
ANSI/NSF 4
ELECTRICAL
CONNECTION
1-1/2" (38mm)
FROM TOP
25" (635mm)
22-1/2" (572mm)2-1/2" (64mm)
39" (991mm)
19-1/16" (484mm)
16-13/16" (411mm)
17-3/16" (437mm)
OFF
F
3
5
0
0
0
1
3
0
0
0
5
1
2
5
0
0
0
2
ELECTRICAL 8-1/16" (205mm)
C
L
C
L
23-3/16" (589mm)
25-9/16" (650mm)
39-1/4" (997mm)
®
19-3/8" (493mm)
1-1/4" (31mm)
ELECTRICAL
CONNECTION
1-5/8" (40mm)
FROM TOP
CAVITY
21-1/2" (547mm)
CAVITY
13-13/16" (351mm)
13-1/8" (333mm)
16-1/8" (409mm)
17-1/8" (434mm)
®
CAVITY