Alto-Shaam 20.20W User Manual
ODEL
ANSI/NSF 4
W164 N9 221 Water Stree t • P.O. B ox 450 • Menomon ee Falls, Wi sconsin 5 3052-0450 • U.S. A.
PH ON E: 262.251 .3800 800.5 58 .8744 U .S.A./ CA NADA FAX : 262.251 .7067 80 0.329.874 4 U.S.A. ON LY
www.alto-sh aam.com
M
HOWN WITH RIGHT-HAND DOOR
(S
20•20MW
CO M PA NI O N HO L D IN G C AB I N ET W I TH R O LL-I N CA R T
• HALO HEAT . . . a controlled,
uniform heat source that gently
surrounds food to provide a better
appearance, taste, and longer holding life.
• Uses one-third to one-half the energy of conventional
holding equipment.
• Motionless air inside cabinet prevents transfer of
flavors, retains more product moisture, and
preserves color.
• Close temperature tolerance, along with even heat
distribution, maintains an ideal serving temperature
throughout the cabinet.
• Roll-In Pan Cart (trolley) is designed for maximum
capacity and is completely interchangeable with the
)
Combitherm
® Combi Oven/Steamer model 20•20 and
the Alto-Shaam
® QuickChiller
TM
QC-100.
• Available in a stationary or mobile cabinet design.
TEM NO
I
. _______________________
20• 20MW
20• 20W
Insulated Halo Heat companion holding cabinet features 20 gauge stainless steel construction. The cabinet is controlled with one (1)
ON/OFF power switch and an adjustable, electronic thermostat which includes a heat indicator light, temperature set button, and
temperature increase and decrease buttons. The thermostat has a range of 60° to 200°F (16° to 93°C) and includes a digital display
indicating the air temperature within the cabinet. The door has a heavy duty rotary handle with standard left-hand hinging.
Each holding cabinet includes one (1) Roll-In Pan Cart (trolley) which features removable handle, pan support rails to hold
full-size pans, and ten (10) wire shelves for sheet pans. Cart includes four (4) swivel casters with brake.
■■
MODEL 20• 20MW: Mobile holding cabinet supported by four (4) heavy duty casters
■■
MODEL 20• 20W: Stationary holding cabinet supported by four (4) heavy equipment legs
FACTORY INSTAL LE D OPTIONS
●
Left-hand door swing is standard.
■■
➥Specify right-hand door as a
special order.
MODEL 20•20W
ROLL-IN PAN CART
-IN PLATE CART
ROLL
D UE TO O NG O IN G PR OD U CT DE V EL O PM EN T , SP E CI F IC AT I ON S AR E SU BJ E CT TO C HA N GE WI T HO U T N OT IC E .P RI NT E D I N U .S .A. #93 - 0 5/ 08
W164 N9 221 Water Stree t • P.O. B ox 450 • Menomon ee Falls, Wi sconsin 5 3052-0450 • U.S. A.
PH ON E: 262.251 .3800 800.5 58 .8744 U .S.A./ CA NADA FAX : 262.251 .7067 80 0.329.874 4 U.S.A. ON LY
www.alto-sh aam.com
3
5" (888mm)
42-1/16" (1068mm)
67-11/16" (1719mm)
39-1/4" (996mm)
42-1/16" (1068mm)
65" (1651mm)
73-5/8" (1869mm)
8
-5/8" (218mm)
32-13/16" (833mm)
ELECTRICAL
CONNECTION
5-5/8" (143mm)
FROM TOP
WITH CASTERS OR LEGS
2
3-3/8" (593mm)
2
8-1/8" (714mm)
65-11/16" (1669mm)
33-5/16" (846mm)
COMPAN ION HOLD ING CABI NET 20• 20MW
20• 20W
D I M E N S I O N S : (
H
X W X D
)
EXTERIOR: 73-5/8" x 35" x 42-1/16"
(1869mm x 888mm x 1068mm)
ROLL-IN PAN CART: (TROLLEY)
All stainless steel construction
-Twenty (20) pan support rail positions
2-5/8" (67mm) vertical spacing between rails
21-3/16" (538mm) horizontal width between rails
-Four (4) casters (swivel with brake)
-One (1) removable push handle
-Ten (10) stainless steel wire shelves
W E I G H T 2 0 • 2 0 M W 2 0 • 2 0 W
NE T: 495 lb (225 kg) 495 lb (225 kg) ES T.
SH IP : 730 lb (331 kg) 730 lb (331 kg) ES T.
CR AT E D IM EN SI ON S: ( H X W X D )
80" X 44" X 50"
(2032mm x 1118mm x 1270mm)
I N S T A L L A T I O N R E Q U I R E M E N T S
●
Applance must be installed level.
●
The appliance must not be installed in any area where it
may be affected by steam, grease, dripping water, high
temperatures, or any other severely adverse conditions.
C L E A R A N C E R E Q U I R E M E N T S
3" (76mm) at the back, 2" (51mm) at the top,
and 1" (25mm) at both sides
E L E C T R I C A L
OLTAGE PHASE CYCLE/HZ AMPS
V
kW C
208-240 (UL )1 50/60 17.1 4.1
208 1 50/60 14.8 3.1
240 1 50/60 17.1 4.1
230 1 50/60 17.0 3.9
P R O D U C T \ P A N C A P A C I T Y
480 lbs (218 kg)
VO LU ME MA XIMUM: 300 QUARTS (284 LITERS)
MA XI MU M
FULL-SIZE PANS: Forty (40) 20" x 12" x 2-1/2" MA XIMUM
GN 1/1: Forty (40) (530mm x 325mm x 65mm)
GN 2/1: Twenty (20) (650mm x 530mm x 65mm)
FULL-SIZE SHEET PANS: Ten (10) 18" x 26" x 1"
added shelves)
Roll-in Pan Rack (UN-27970)
—Ten (10) stainless steel wire shelves
—Twenty (20) pan support rail positions
2-5/8" (67mm) vertical spacing between rails
21-3/16" (538mm) horizontal width between rails
O P T I O N S & A C C E S S O R I E S
Preheat Sealing Strip
■■
■■
Roll-In Pan Cart (fits QC-100, 20•20ES & 20•20ESG)
■■
Roll-In Plate Cart (fits 20•20E S & 20•20ESG)
65-1/2"
(1663mm x 770mm x 1004mm)
2-11/16" (69mm)
HO LD S 114 10-12" (254-305mm) D IAMETER PL AT ES
Roll-In Plate Cart (fits 20•20E S & 20•20ESG)
■■
65-1/2"
X 30-5/16" X 39-9/16"
SP AC IN G
X 30-5/16" X 39-9/16"
(1663mm x 770mm x 1004mm)
3-1/2" (89mm)
HO LD S 78 10-12" (254-305mm) D IA ME TE R P LATES
■■
Shelf, Stainless Steel Wire
SP AC IN G
ORD
LUG
& P
NN EE MM AA
0A-250V Plug
3
NO CO RD OR P LU G
(20 with
UN-27970
UN-27971
UN-28311
L6-30P
5007925
SH-22473
D UE T O O N GO I NG PR O DU C T D EV EL O PM E NT , S P EC I FI C AT IO N S A RE S UB JE C T T O C HA N GE W I TH O UT NO T IC E . P RI NT E D I N U .S .A.#93 - 0 5/ 08
Loading...