Alto Shaam 200-HFT Installation Manual
HOT FOOD TABLE - MARINE 4/06
PRINTED IN U.S .A .
OPERATION and CARE MANUAL
®
COOK/HOLD/SERVE SYSTEMS
HOT FOOD TABLE
ELECTRIC, 230V
200-HFT MARINE
300-HFT MARINE
(OR BASE ONLY)
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA
PHONE: 262.251.3800 • 800.558-8744 USA/CANADA Fax: 262.251.7067 • 800.329.8744 USA/CANADA
WEB SITE: www.alto-shaam.com
200-HFT
300-HFT
O&C MANUAL • 200-, 300-HFT MARINE
PG. 2
DELIVERY
This Alto-Shaam appliance has been
thoroughly tested and inspected to insure only the
highest quality unit is provided. Upon receipt,
check for any possible shipping damage and
report it at once to the delivering carrier. See
Transportation Damage and Claims section
located in this manual.
This appliance, complete with unattached
items and accessories, may have been delivered in
one or more packages. Check to ensure that all
standard items and options have been received
with each model as ordered.
Save all the information and instructions
packed with the appliance. Complete and return
the warranty card to the factory as soon as
possible to assure prompt service in the event of a
warranty parts and labor claim.
This manual must be read and understood by
all people using or installing the equipment
model. Contact the Alto-Shaam service
department if you have any questions concerning
installation, operation, or maintenance.
NOTE: All claims for warranty must include the
full model number and serial number of
the unit.
UNPACKING
1. Carefully remove the
appliance from the
carton or crate.
NOTE: Do not discard the
carton and other
packaging material
until you have
inspected the unit
for hidden damage
and tested it for
proper operation.
2. Read all instructions in this manual carefully
before initiating the installation of this appliance.
DO NOT DISCARD THIS MANUAL.
This manual is considered to be part of the
appliance and is to be provided to the owner
or manager of the business or to the person
responsible for training operators. Additional
manuals are available from the Alto-Shaam
service department.
3. Remove all protective plastic film, packaging
materials, and accessories from the appliance
before connecting electrical power. Store any
accessories in a convenient place for future use.
®
®
®
O&C MANUAL • 200-, 300-HFT MARINE
PG. 3
SAFETY PROCEDURES
AND PRECAUTIONS
Knowledge of proper procedures is essential to the
safe operation of electrically and/or gas energized
equipment. In accordance with generally accepted
product safety labeling guidelines for potential
hazards, the following signal words and symbols
may be used throughout this manual.
Used to indicate the
presence of a hazard that
will cause severe personal
injury, death, or substantial
property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can cause personal injury,
possible death, or major
property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can or will cause minor or
moderate personal injury
or property damage if the
warning included with this
symbol is ignored.
Used to indicate the
presence of a hazard that
can or will cause minor
personal injury, property
damage, or a potential
unsafe practice if the
warning included with this
symbol is ignored.
Used to notify personnel of
installation, operation, or
maintenance information that is
important but not hazard related.
1. This appliance is intended to hold or
process foods for the purpose of human
consumption. No other use for this
appliance is authorized or recommended.
2. This appliance is intended for use in
commercial establishments where all
operators are familiar with the purpose,
limitations, and associated hazards of this
appliance. Operating instructions and
warnings must be read and understood by
all operators and users.
3. Any troubleshooting guides, component
views, and parts lists included in this manual
are for general reference only and are intended
for use by qualified technical personnel.
4. This manual should be considered a
permanent part of this appliance. This
manual and all supplied instructions,
diagrams, schematics, parts lists, notices, and
labels must remain with the appliance if the
item is sold or moved to another location.
NOTE:
O&C MANUAL • 200-, 300-HFT MARINE
PG. 4
SITE INSTALLATION
This Alto-Shaam
appliance must be
installed in a location
that will permit it to
function for its
intended purpose and
to allow adequate
clearance for proper
cleaning and access.
1. This appliance must be installed on a stable
and level surface.
2. DO NOT install this appliance in any area where
it may be affected by any adverse conditions such
as steam, grease, dripping water, high
temperatures, etc.
3. This appliance must be kept free and clear of
any obstructions blocking access for
maintenance or service.
®
TO PREVENT PERSONAL INJURY,
USE CAUTION WHEN MOVING OR
LEVELING THIS APPLIANCE.
METAL PARTS OF THIS EQUIPMENT
BECOME EXTREMELY HOT WHEN IN
OPERATION. TO AVOID BURNS,
ALWAYS USE HAND PROTECTION
WHEN OPERATING THIS APPLIANCE.
IMPROPER INSTALLATION, ALTERATION,
ADJUSTMENT, SERVICE OR MAINTENANCE
COULD RESULT IN SEVERE INJURY, DEATH
OR CAUSE PROPERTY DAMAGE.
INSTALLATION
A number of adjustments are associated with initial
installation and start-up. It is important that these
adjustments be conducted by a qualified service
technician. Installation and start-up adjustments are
the responsibility of the dealer or user. These
adjustments include but are not limited to leveling,
electrical hook-up.
LEVELING
Level the
appliance from side-to-side
and back-to-back
with the use of a spirit level.
We recommend checking the level of the appliance
periodically to make certain the floor has not shifted
nor the appliance moved.
NOTE: Failure to properly level this appliance can
cause improper function.
WEIGHT
200-HFT 300-HFT
NET 105 lb (48 kg) 160 lb (73 kg)
SHIP 225 lb (102 kg) 265 lb (120 kg)
CRATE
42" X 46" X 39" 42" X 73" X 39"
DIMENSIONS:
(1067 x 1168mm x 991mm) (1067mm x 1854mm x 991mm)
(H x W x D)
O&C MANUAL • 200-, 300-HFT MARINE
PG. 5
SITE INSTALLATION
INSTALLATION
20-1/8"
(511mm)
26-1/8" (663mm)
33-7/8"
(859mm)
6-1/16" (154mm)
4-3/8" (111mm)
27-3/4" (704mm)
26-1/8" (663mm)
27-3/4" (704mm)
26-1/2" (672mm)
1
3
"
(3
3
2
m
m
)
Power Switch
6-1/4" (159mm)
Electrical Connection
12" (305mm)
9-1/4"
(235mm)
38-1/8" (968mm)
43-1/8" (1095mm)
20-1/8"
(511mm)
26-1/8" (663mm)
64-1/4" (1632mm)
69-9/16" (1767mm)
33-7/8"
(859mm)
6-1/16" (154mm)
4-3/8" (111mm)
27-3/4" (704mm)
26-1/8" (663mm)
27-3/4" (704mm)
26-1/2" (672mm)
1
3
"
(3
3
2
m
m
)
Power Switch
6-1/4" (159mm)
Electrical Connection
12" (305mm)
9-1/4"
(235mm)
OPTION
Decorator Cart — 200-HFT Part No.
— with shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55185
— painted decor panel package . . . . . . . . .44075
— stainless steel decor package . . . . . . . . .44078
— roll-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55184
— painted decor panel package . . . . . . . . .44075
— stainless steel decor package . . . . . . . . .44078
Decorator Cart — 300-HFT Part No.
— with shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55181
— painted decor panel package . . . . . . . . .44073
— stainless steel decor package . . . . . . . . .44076
— roll-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55728
— painted decor panel package . . . . . . . . .44073
— stainless steel decor package . . . . . . . . .44076
— fully enclosed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55183
— painted decor panel package . . . . . . . . .44074
— stainless steel decor package . . . . . . . . .44077
#55181
#55728
Outside Dimensions
O&C MANUAL • 200-, 300-HFT MARINE
PG. 6
Sneeze Guard
Control Box
Adjustable 6” Leg
Heat
Guard
Heat
Guard
Spacer
INSTALLATION
Custom Panel Colors . . . . . . . . . . . . . . . . . . . .FACTORY QUOTE
Pan Divider Bars
— Full Size . . . . . . . . . . . . . . . . . . . . . . . . . .16019
— Half-Size • Third-Size . . . . . . . . . . . . . . .11318
300-HFT Customer Sneeze Guard, large
— Front Guard . . . . . . . . . . . . . . . . . . . . . . .44149
— End Guard . . . . . . . . . . . . . . . . . . . . . . . . .44239
SPECIAL INFORMATION
●
Pans are not included.
●
Opening required for drop-in countertop
applications:
300-HFT • 25” x 69-1/2” (635mm x 1765mm)
200-HFT • 25” x 43-1/8” (635mm x 1095mm)
OPTIONS AND ACCESSORIES
Loading...