Altis Technology ACXT1035R FLT user manual

Owner’s Manual

Vox

TW DCS Scan CTCSS Mem

Vox

HI MED LO WX

TW DCS Scan CTCSS Mem

Vox

TW DCS Scan

Vox

TWO-WAY RADIO MODEL

ACXT1035R FLT

Nothing Comes Close to a Cobra

Printed in China

Part No. KEM-ML38202B

English

Introduction

Making Life Easier and Safer

Staying in touch with your family and friends is convenient and easy when using your microTALK Some of the many uses you will discover include:

Communicating with others while hiking, biking, and working; keeping track of family and friends at a crowded public event; checking with travel companions in another car; talking with neighbors; arranging meeting spots with others while shopping at the mall.

Belt Clip

Secure your microTALK the go.

Carrying your microTALK

radio with you is easy

when using the belt clip or optional wrist strap. The belt clip easily attaches to your belt, purse, or

backpack.

Customer Assistance

radio.

radio while on

Product Service & Support

For any questions about operating this new Cobra branded product, PLEASE CONTACT US FIRST… do not return this product to the retail store. The contact information for support will vary depending on the country in which you purchased and utilize the product.

To obtain warranty service or other information for products purchased from Altis itself or through its authorized reseller or agent and utilized in the U.S.A., please call our consumer support line at (866) 721-3805, or email us at support@altistec.com. You will receive instructions on how to ship the products at your expense to an Altis Global Limited Authorized Service Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; and, most importantly; (c) your address and telephone number.

For warranty and customer service information outside the US, please contact your local dealer.

For further information needed on its features, please visit www.cobrawalkietalkie.com for frequently asked questions and the electronic manual.

Atlanta, GA USA.

www.cobrawalkietalkie.com

A-1 A-2 A-3 1 2 3

Introduction

Product Features

1. Antenna

2. External Speaker/ Microphone/ USB Charge Jack

3. Mode/Power Button

4. Call/Lock Button

5. Channel Up/Down Buttons

6. Backlit LCD Display

7. Speaker/Microphone

8. Volume Up/Down Buttons

9. LED Light Button

10. Talk Button

11. Memory/Escape Button

12. Tri-Watch Button

13. Scan Button

14. Rewind-Say-Again

15. Wrist Strap Connection

16. Belt Clip

17. Battery Compartment

18. Battery Door Screws (2)

19. Rubberized Grips

20. LED Flashlight

21. Weather Button

Button

Features

• 22 Channels

• 10 Channel Weather

Radio

• Weather Alert

• 121 Privacy Codes

(38 CTCSS codes/ 83 DCS codes)

• Hands-Free Operation (VOX)

• VibrAlert

Silent Paging

• Rewind-Say-Again

• Tri-Watch

• Scan

Channels, privacy codes

• Backlit LCD Display

• LED Flashlight

• Call Alert

Ten selectable tones

• Button Lock

• Speaker/Microphone/

Charge Jack

• Roger Beep

Selectable On/Off

• Battery/Power Saver

• Keystroke Tones

• Battery Level Indicator

• Low Battery Audible Alert

• Auto Squelch

• Belt Clip

Backlit LCD Display

1. Battery Level Indicator

2. Roger Beep Icon

3. VOX Icon

4. Weather Icon

5. Lock Icon

6. Hi/Med/Low Power Icon

7. DCS/CTCSS Icons

8. Scan/Memory Icon

9. Weather Alert Icon

10. DCS/CTCSS Privacy Code Numbers

11. Power Saver Icon

12. Channel Numbers

13. Receive/Transmit Icon

14. Memory Channel Number

15. VibrAlert

16. Key Tone Icon

17. BURP Icon

18. Rewind-Say-Again

19. Signal Strength Meter

/ Call Alert Icon

Icon

Caring for Your microTALK® Radio

Your microTALK® radio will give you years of trouble-free service if cared for properly. Handle the radio gently. Keep the radio away from dust. Avoid exposure to extreme temperatures.

Using Your Radio

Installing Batteries

To install or replace batteries:

Remove Belt Clip

Insert Batteries

Tip of Belt Clip

1. Remove belt clip by releasing belt clip latch and sliding clip up.

2. Loosen the two top and bottom screws on the back of the radio to remove the battery compartment cover. HINT: the screws should be loose enough (and sticking up) that you could use them to help pull off the battery door if needed.

3. Insert the supplied three AA rechargeable batteries or non-rechargeable alkaline batteries. Position batteries according to polarity markings.

4. Replace battery compartment cover, screw down the screws and re-attach the belt clip.

5. Tighten the screws using the tip of the belt clip to secure the battery door to the radio. Do not overtighten. Only use the tip of the belt clip to tighten the screws.

If charging light is not on, check position of radio. Radio should be upright. The charge indicator light will stay on until the charging is complete.

• Do not attempt to charge alkaline batteries.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or

rechargeable (Ni-Cd, Ni-MH, etc.) batteries.

To charge batteries in radio:

Radio Charger Jack

• Use only the supplied rechargeable batteries and charger for recharging your Cobra microTALK

• Cobra recommends your radio is turned off while being charged.

• It normally takes about 15 hours to fully charge batteries.

• Non-rechargeable alkaline batteries can also be used in your radio.

1. Check to see that the batteries are inserted properly.

2. Insert the cable into the charge jack located at the

top of the radio.

3. Plug the charging cable into a power source.

radio.

Turning on Your microTALK® Radio

Operation

For charging microTALK radio(s) in desktop charger:

1. Insert radio(s) into desktop charger as shown.

2. Insert the micro-USB cable into jack on back of charger.

Note: Charger should be installed near the equipment and easily accessible.

3. Plug the charging cable into a power source. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Quick Start

1. Press and hold the Mode/Power button to turn on your radio.

2. Press the Channel Up or Channel Down button to select

a channel.

Both radios must be tuned to the same channel/privacy code to communicate.

3. Press and hold the Talk button while speaking into the microphone.

button and listen for a response.

Press and hold the Mode/Power button until you hear a series of audible tones indicating the radio is on.

Your microTALK ready to receive transmissions. The radio is always in

Standby mode except when the Talk, Call or Mode/Power buttons are pressed.

Talk

radio is now in Standby mode,

Battery Low

Battery Low icon will blink and an audible tone will

Vox

sound twice before the radio shuts off. Your batteries should be replaced if using alkaline batteries or recharged if using rechargeable batteries.

The radio’s LCD display will show a blinking charging status indicator while charging.

Auto Battery Save

If there are no transmissions within 10 seconds, the

Battery Save Mode

radio will automatically switch to Battery Save mode and the Power Saver This will not affect the radio’s ability to receive incoming transmissions.

Communicating with Another Person

1. Press and hold the Talk button.

Talk Button

2. With the microphone about two inches (5 cm) from your mouth, speak in a normal voice.

3. Release the Talk button when you are

Two Inches (5 cm)

You cannot receive incoming calls while

from Mouth

pressing the Talk button.

Both radios must be tuned to the same channel to communicate.

To Select a Channel

With the radio on, select any of the 22 channels by pressing the Channel Up or Channel Down button.

Channel Number

HI MED LO WX

Both radios must be tuned to the same channel to communicate.

See page 19 for frequency allocations.

Listening for a Response

Release the Talk button to receive incoming

Listening

transmissions. Your microTALK

radio is always

in Standby mode while the Talk or Call buttons are not pressed.

To Adjust Volume

Press the Volume Up or Volume Down button.

A double beep sound is used to indicate the minimum and maximum volume levels (1 through 8).

Volume Level

Call Button

Press the Call button. The other person will hear a three second call

tone. This tone is used only to establish voice communications.

See page 10 on how to select between ten call tone settings.

LED/S.O.S. Flashlight

Press the

LED/S.O.S. Flashlight

button below the TALK

bottom of the radio. To activate S.O.S. function, press and hold the

button to turn on. Press and release to turn off the

Auto Squelch/Maximum Range

Your microTALK and unwanted noise due to terrain, conditions or if you’ve reached your Maximum Range limit.

radio will automatically shut off weak transmissions

Lock Function

The Lock function locks the Channel Up, Channel Down, Volume Up, Volume Down and Mode/Power buttons to prevent accidental operation.

To turn the lock on or off: – Press and hold the Call/Lock button for

Lock Icon

two seconds.

on or off request. When in Lock mode, the Lock icon will be displayed.

microTALK

Range

Your range will vary depending on terrain and conditions.

operate at maximum range. Buildings and foliage in the path of the

signal can reduce the range of the radio. Dense foliage and hilly terrain will further

reduce the range of the radio. On Channels 8 through 14, your radio

automatically switches to low power, which will limit the range the radio can communicate.

Operation

Mode Functions

Scrolling Through the Mode Function

By scrolling through the Mode function, you will be able to select or turn on preferred features of your microTALK scrolling through the Mode function, your radio features will be displayed in the same predetermined order:

Set CTCSS Privacy Codes Set DCS Privacy Codes Set Hi-Mid-Low Power Set Vox On/Off Set Vox Sensitivity Set Call Tones 1-10 Set VibrAlert On/Off Set Roger Beep On/Off Set Key Tones On/Off Set Rewind-Say-Again On/Off

Privacy Codes

Your microTALK

radio incorporates two advanced coded squelch systems that can help to reduce interference from other users on any given channel. CTCSS (Continuous Tone Coded Squelch System) provides 38 privacy codes and DCS (Digitally Coded Squelch) provides 83 privacy codes. This provides a total of 121 Privacy Codes. Either system can be used on all channels, but both systems cannot be used on the same channel at the same time.

To successfully communicate using a privacy code, both the sending and receiving radios must be tuned to the same channel and to the same privacy code system (CTCSS or DCS) and privacy code number. Each channel will remember the last privacy code system and number you select.

The privacy code 00 is not a privacy code, but allows all signals to be heard on a channel that is set to 00 on both the CTCSS and DCS systems.

radio. When

Set CTCSS Privacy Codes

To select a CTCSS privacy code:

1. After selecting a channel, press the Mode/Power button until the CTCSS icon appears and the small numbers next to the

Privacy Code

TW DCS Scan CTCSS Mem

If DCS is turned on at the channel

CTCSS icon and “OFF.” To switch from DCS to CTCSS, press the Channel Up or Channel Down button while the display

will then be able to proceed to step 2.

2. Press using the Channel Up or Channel Down button to select a privacy code. You can hold the Up or Down button for fast advance.

3. When your desired CTCSS privacy code is displayed, press the Mode/Power button to enter the new setting and proceed to other functions, or press the Talk button to return to Standby mode.

Set DCS Privacy Codes

To select a DCS privacy code:

1. After selecting a channel, press the Mode/Power

button until the DCS icon appears and the small

DCS Privacy Code

CTCSS Mem

If CTCSS is turned on at the channel selected,

To switch from CTCSS to DCS, press the Channel Up or Channel Down button while

you will then be able to proceed to step 2.

2. Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.

3. When DCS privacy code is displayed, press the Mode/Power button to enter the new setting and proceed to other functions, or press the Talk button to return to Standby mode.

Set High/Medium/Low (H-M-L) Power Button

Your radio can transmit selectively at 0.5, 1, or 2 watts of power. Use the low power setting for short-range communications and use the high power setting for long-range communications.

To toggle between H-M-L Power Modes:

1. Press the Mode/Power button until HI MED LO

icon appears.

2. Press using the Channel Up or Channel Down

button to select between High/Medium/Low power.

3. When the desired power is selected, press the Mode/Power button to proceed to other functions,

or press the Talk button to return to Standby mode.

Channel 8 through 14 only operates on Low power setting.

Voice Activated Transmit (VOX)

In VOX mode, your microTALK

radio can be used “hands-free,” automatically

transmitting when you speak. You can set the VOX volume of your voice and avoid transmissions triggered by background noise.

To turn VOX mode on or off:

1. Press the Mode/Power button until the VOX On or Off

setting is displayed.

VOX Icon

2. Press the Channel Up or Channel Down

Vox

button to turn VOX On or Off.

3. When VOX is turned on or off, press the Mode/Power button to enter the new setting and proceed to other functions, or press the Talk button to return to Standby mode.

To set VOX sensitivity:

1. Press the Mode/Power button until the VOX icon

VOX Sensitivity Level

The current VOX sensitivity level is displayed with letters “L” and a Number 1

through 5, with Number 5 being the most

sensitive level and Number 1 being the least sensitive level.

2. Press the Channel Up or Channel Down

button to change the setting.

3. When VOX sensitivity is selected, press the

Mode/Power button to enter the new setting

and proceed to other functions, or press the Talk button to return to Standby mode.

Ten Call Tone Settings

You can choose between ten different Call Tone Settings to transmit a call alert.

To change a call tone setting:

1. Press the Mode/Power button several times until

the letter “C” and the current call tone number (01 through 10) is displayed. The current call tone will

sound for three seconds.

Call Tone Setting

2. Press the Channel Up or Channel Down button to hear the other call tone settings.

3. Choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions. b. Press Talk or Call/Lock button to return to Standby mode.

c. Do not press any buttons for 12 seconds to

return to Standby mode.

VibrAlert

Your MicroTALK

and Call Alert

radio can alert you to incoming signals by sounding an

audible call tone or an audible tone with VibrAlert®. To change call settings:

Call Tone On/ Vibrate On

1. Press the Mode button several times until the Call

Setting

setting (“01” vibrate + ring, “02” ring only) is displayed.

Call Tone On/

2. Press the Channel Up or Channel Down button to

Vibrate Off

change the call setting.

3. Choose one of the following:

a. Press the Mode button to enter the new setting and proceed to other functions.

b. Press Talk or Call/Lock button to return to Standby mode. c. Do not press any buttons for 12 seconds to return to Standby mode.

Mode Functions (continued on back side)

4 5 6 7 8 9 10

Operation

TW DCS Scan CTCSS Mem

Vox

HI MED LO WX

TW DCS Scan CTCSS Mem

wer Saver

Vox

TW DCS Scan CTCSS Mem

Vox

TW DCS Scan

CTCSS Mem

Mode Functions

Your listener will hear an audible tone when you release the Talk button. This alerts the other party that you have nished talking and it is OK for them to speak.

To turn roger beep on or off:

1. Press the Mode/Power button several times until

the Roger Beep

2. Press the Channel Up or Channel Down button to select roger beep on or off.

3. Choose one of the following: a. Press the Mode/Power button to enter the new setting and proceed to other functions.

b. Press Talk or Call/Lock button to return to Standby mode.

mode.

Key Tone On/Off

When Key Tone is On, an audible tone will sound each time a button is pressed.

enter the new setting and return to Standby

Weather (WX) Alert Mode

Turning On the Weather Alert function will allow your radio to automatically receive NOAA weather signals and warnings from designated weather broadcast stations. If the radio is turned ON, it will alert to Weather and other emergency alerts broadcast by NOAA.

This feature is set to OFF by default.

Make sure the strongest Weather channel is selected for your area using the NOAA All Hazards Radio Channels selection in the previous menu.

To turn Weather Alert On or Off:

1. Press the Weather button to enter the All Hazards (Weather) radio mode.

2. Press the Weather button again and the Weather

Off setting is displayed.

3. Press the Channel Up and Channel Down button to turn Weather Alert On or Off.

4. Press the Weather button again to save the new setting.

enter the new setting and return to Standby

To turn key tone on or off:

2. Press the Channel Up or Channel Down button to

select key tone on or off.

3. Choose one of the following:

Standby mode.

Standby mode. c. Do not press any buttons for 12 seconds to

mode.

(continued)

on or off setting is displayed.

c. Do not press any buttons for 12 seconds to

a. Press the Mode/Power button to enter the

b. Press Talk or Call/Lock button to return to

Rewind-Say-Again

Rewind On/Off

If Rewind is enabled, the last 20 seconds of incoming audio is recorded and you can play back calls by pressing the Rewind button.

To set the Rewind mode ON or OFF:

1. Press the Mode/Power button until the Rewind

icon appears.

2. Press Channel Up/Down button to select ON or OFF.

3. Press Push-to-talk (PTT) button to save entry.

Use the Cobra exclusive Rewind-Say-Again feature to replay or record the last 20 seconds of an incoming audio transmission.

Example 1: When music or conversation creates too much noise to

hear an inbound message clearly, press the REWIND button to hear the message a second time.

Example 2:

When listening to an urgent message with confusing background noise, press the REWIND button to hear the message a second time. To erase the recorded

audio, hold down the REWIND button while turning on

that the recorded audio has been erased.

Hold the Rewind button to lock the recording memory (the Rewind the currently recorded transmission.

12 13 14 15 16 17

10 Memory Location

Your microTALK

radio has 10 Memory Locations for storing your most

frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned.

To program a memory location:

1. Press the MEM/ESC button. Memory icon and Memory Location show on the display.

2. Press the Channel Up or Channel Down button

to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3. Press the MEM/ESC button to enter a new

memory location or edit an already programmed memory location.

4. Press the Channel Up or Channel Down button

to select the memory location.

5. Press the MEM/ESC button. The channel

6. Press the Channel Up or Channel Down button

TW DCS Scan

Memory Channel

to select a channel (1 through 22).

CTCSS Mem

7. Press the MEM/ESC button. The CTCSS icon and

8. Choose one of the following: a. Press the Channel Up or Channel Down

button to select a CTCSS privacy code (00 through 38) for the channel.

b. Press the MEM/ESC button to switch from

CTCSS to DCS. The DCS icon and privacy code

Channel

Up or Channel Down button can then be used

to select a DCS privacy code (00 through 83) for the channel.

If “oF code is already set in the opposite (CTCSS or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.

9. Choose one of the following: a. Press the MEM/ESC button to enter the channel/privacy code in the

selected memory location. Radio then proceeds to next memory location, which will blink.

b. Press and hold the MEM/ESC button to save the current state of the Set Memory Function and press the MEM/ESC button again return to Standby mode.

To recall a stored memory channel location:

1. Press the MEM/ESC button until the Memory icon

display.

2. Press the Channel Up or Channel Down button to select a memory location (0 through 9).

Memory Channel

TW DCS Scan CTCSS Mem

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3. Press and hold the MEM/ESC button to return to Standby mode on the selected memory location.

A memory location can be reprogrammed at any time it is displayed. Press the MEM/ESC button to begin.

Tri-Watch Set-up

Your microTALK® radio can be set up to scan three of your favorite channels for activity. To Program or Edit the Tri-Watch Channels:

1. Press and hold the TRI-WATCH button from Standby mode for two (2) seconds to activate Tri-Watch Setup mode. The TW icon on the display will turn ON.

indicate channel position.

2. Press Channel Up or Channel Down button to select the desired Tri-Watch channel.

3. Press and release TRI-WATCH entry.

4. Repeat steps 2 and 3 to program the remaining additional Tri-Watch memory channel.

5. After programming both Tri-Watch memory channels the radio will immediately engage Tri-Watch mode.

Using Tri-Watch:

1. From Standby mode, press the TRI-WATCH button. The TW will appear in the display along with the three channels stored in the Tri-Watch memory.

2. The radio will scan through the three (3) Tri-Watch memory channels.

3. A signal on any one (1) of the three (3) channels will stop the scan for 6 seconds to allow you to

After the Tri-Watch scan stops to monitor a channel, as long as you do not press any buttons within 6 seconds, your radio will automatically resume scanning the Tri-Watch channels

4. Press Channel Up or Channel Down button to resume scanning the Tri-Watch channels or to change the scan direction.

5. To EXIT the Tri-Watch scan, press the TRI-WATCH button again, and the radio will return to Standby mode.

BURP

BURP features allows the user to expel water from inside the speaker grille. This is useful if the radio is dropped in the water which may

To activate BURP:

1. Press the MEM/ESC and Rewind buttons at the same time.

2. The Burp tone(s) at maximum level will sound from the internal speaker for 8 seconds. During this time, BURP will appear in the display.

BURP Icon

3. Hold the radio with the speaker grille down to help

BURP Po

the water drain out.

4. After an 8-second interval, the radio will return to standby.

Channel Scan

Your microTALK

radio can automatically scan channels.

To scan channels:

1. Press and release the Scan button until the Scan icon and the channel numbers appear on the display.

Scan Channels

2. Press and hold the Scan button to begin scanning channels.

Vox

HI WX

codes while scanning channels.

The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 6 seconds.

During scanning (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode. b. Press the Channel Up or Channel Down button to resume scanning channels. c. Press and hold the Scan button to return to Standby.

Privacy Code Scan

Your microTALK

radio can automatically scan the Privacy Codes (either

CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.

To scan privacy codes:

1. While in Standby mode, press the Scan button twice (CTCSS) or three times (DCS) until the

2. Press and hold the Scan button to begin scanning privacy codes within the selected channel.

The Scan icon will continue to be displayed when

Select Channel

HI MED LO WX

privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 6 seconds.

Scan Privacy Codes

NOAA* All Hazards Radio Channels

You can use your microTALK

radio to listen to NOAA All Hazards Radio

channels transmitting in your area.

To listen to All Hazards Radio channels:

1. Press the Weather button until the All Hazards Radio icon and the currently selected All Hazards

Radio channel are displayed.

Hazards Radio Icon

2. Use the Channel Up or Channel Down button to change All Hazards Radio channels.

3. The All Hazards Radio icon will continue to be displayed when All Hazards Radio is on.

4. To exit All Hazards Radio, press the TALK button.

*National Oceanographic and Atmospheric Administration

IMPORTANT NOTICE:

On or

Operation

General Specications

Frequency Allocation

A = Channel No. for 22 Channel Models B = Frequency in MHz C = Power Output

A B C

1 462.5625 High

2 462.5875 High

3 462.6125 High

4 462.6375 High

5 462.6625 High

6 462.6875 High

7 462.7125 High

8 467.5625 Low

9 467.5875 Low

10 467.6125 Low

11 467.6375 Low

12 467.6625 Low

13 467.6875 Low

14 467.7125 Low

15 462.5500 High

16 462.5750 High

17 462.6000 High

18 462.6250 High

19 462.6500 High

20 462.6750 High

21 462.7000 High

22 462.7250 High

WARNING: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received,including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Safety Information for microTALK Radios

Your wireless handheld portable transceiver contains a low power transmitter. When the talk button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices

Important

FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Cobra accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modications or attachments could damage the transmitter and may violate FCC regulations.

Normal Position

Hold the transmitter approximately 25 mm from your face and speak in a normal voice, with the

antenna pointed up and away.

ISEDC WARNING

This device complies with ISEDC license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Under ISEDC regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by ISEDC. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

The applicant is responsible for providing proper instructions to the user of the radio device, and any usage restrictions, including limits of exposure durations. The user manual shall provide installation and operation instructions, as well as any special usage conditions, to ensure compliance with SAR

and/or RF eld strength limits. For instance, compliance distance shall be clearly stated in the user

manual.

Cetappareil est conformeaux normes RSSexemptes delicence ISEDC. Son fonctionnementest

soumisauxdeuxconditionssuivantes:(1)cetappareilnedoitpasprovoquerd'interférenceset(2)

cetappareil doit accepter toute interférence, ycomp risles interférences pouvantentraîner un

fonctionnementindésirabledel'appareil.Envertudesréglementations

nepeut fonctionnerqu'avec uneantenne d'untype etun gain maximal(ou inférieur)approuvé

pour l'émetteur par l'ISEDC.  Pour réduire les interférences radio potentielles avec d’autres

utilisateurs,letype d’antenneetson gain doiventêtre choisisde manièreà ceque la puissance

isotrope rayonnée

communicationréussie.

Ledemandeurestresponsablede fournirdesinstructionsappropriéesà l'utilisateurdudispositif

radioetdetou terestrictiond'utilisation,ycomprisleslimitesdeladuréed'exposition.Lemanuel

del'utilisateurdoit fournirdesinstructionsd'installationet

d'utilisationspéciales,pourassurerlaconformitéavecleslimites dechampdeSARet/ouRF.Par

exemple,ladistancedeconformitédoitêtreclairementindiquéedanslemanueld'utilisation.

Important:

Exigences de la FCC/ISEDC concernant l’exposition aux champs électro-magnétiques RF (radiofréquences): En ce qui concerne le fonctionnement de l’appareil porté sur le corps de l’utilisateur, les tests effectués ont permis de vérier que cet émetteur-récepteur satisfait aux directives FCC/ISEDC limitant l’exposition aux champs électro-magnétiques RF lorsqu’il est utilisé avec les accessoires Cobra fournis ou conçus pour ce produit; l’utilisation d’autres accessoires peut ne pas garantir le respect des critères des directives FCC/ISEDC limitant l’exposition aux champs électro-magnétiques RF. Utiliser l’appareil uniquement avec l’antenne fournie. L’emploi d’une antenne non homologuée ou modiée, ou d’accessoires non autorisés, pourrait faire subir des dommages à l’appareil, et peut violer les prescriptions de la réglementation FCC/ISEDC.

Position normale:

Tenir l'émetteur à environ 25 mm de la bouche et parler normalement, l'antenne étant éloignée et dirigée vers le haut.

 équivalente (e.i.r.p.)  ne soit pas supérieure à celle nécessaire à une

MODEL ACXT1035R FLT:

FCC Warnings: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra may cause a violation of the technical regulations of part 95 of the FCC rules, or violation of type acceptance requirements of part 2 of the rules.

ISEDC,cetémetteurradio

d'utilisation,ainsique desconditions

Warranty & Trademark Acknowledgment

Limited One-Year Warranty

Altis Global Limited warrants to the original consumer purchaser only that this product and the component parts thereof, will be free from defects in workmanship and materials for a period of one year from the date of rst consumer purchase. During this period, Altis will, repair or replace, at its sole option and discretion, this product or any defective parts. Altis’ liability hereunder shall be limited to repair or replacement of the defective part or parts, and such correction shall constitute a fulllment of all of Altis’ warranties hereunder.

This limited warranty is only valid for the original consumer purchaser in limited jurisdictions and is not transferrable. This limited warranty will automatically terminate prior to expiration if this product is sold or otherwise transferred to another party. The product must be purchased from Altis or an authorized dealer or the warranty is void. This limited warranty is valid only for products purchased and utilized in specic jurisdictions. Please visit our website at www.cobrawalkietalkie.com for a list of jurisdictions wherein this limited warranty is valid.

This limited warranty does not cover damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modication of, or to any part of this product. This warranty does not cover damage due to improper operation, maintenance or installation; ordinary wear and tear; or attempted alterations or repairs by anyone other than Altis or someone authorized by Altis to do warranty work. Any unauthorized alterations or repairs will void this warranty. This limited warranty does not cover product sold AS IS or WITH ALL FAULTS. This limited warranty is invalid if the factory applied serial number or date stamp has been altered, defaced or removed from this product. This limited warranty does not cover product purchased or utilized in a jurisdiction not covered.

The procedure for obtaining service and support, and the applicability of this warranty, will vary depending on the country or jurisdiction in which you purchase and utilize the product. For details on obtaining product service, support and other warranty information please visit www.cobrawalkietalkie.com.

This warranty gives you specic legal rights, and you may also have other rights which vary from state to state and country to country.

EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, ALTIS MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. ALTIS EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESSED WARRANTY.

LIMITATION OF REMEDIES AND DAMAGES. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. ALTIS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ATTORNEYS’ FEES AND/OR COSTS OF LITIGATION, FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. ALTIS IS NOT LIABLE FOR ANY DAMAGES CAUSED

BY THE PRODUCT OR BY THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES. ALTIS IS NOT LIABLE FOR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY. THIS LIMITATION APPLIES WHETHER DAMAGES ARE SOUGHT, OR A CLAIM MADE, UNDER THIS WARRANTY OR AS A TORT CLAIM (INCLUDING NEGLIGENCE OR STRICT PRODUCT LIABILITY), A CONTRACT CLAIM, OR ANY OTHER CLAIM. THIS LIMITATION CANNOT BE WAIVED OR AMENDED BY ANY PERSON. THIS LIMITATION OF LIABILITY WILL BE EFFECTIVE EVEN IF ALTIS OR AN AUTHORIZED REPRESENTATIVE OF ALTIS HAS BEEN ADVISED BY YOU OF THE POSSIBILITY OF ANY SUCH DAMAGES.

Some states and countries do not allow limitations on how long an implied warranty lasts and do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state and country to country

Provided that the product was purchased from Altis itself or through its authorized reseller or agent and utilized in the U.S.A., Altis will, without charge, repair or replace, at its option, defective products, products or component parts upon delivery to the authorized Altis Global Limited Authorized Service Center, accompanied by proof of the date of rst customer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for warranty service, but the return charges, to an address in the U.S.A, will be at Altis’ expense, if the product is under warranty.

For Products Purchased Outside the U.S.A.

Please contact your authorized local reseller or agent for warranty information.

Trademark Acknowledgement

Manufactured, distributed, or sold by Altis Global Limited, ofcial licensee for this product.

Cobra

, microTalk®, Nothing Comes Close to a Cobra®, and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation, USA. All other product or service names are the property of their respective owners.

Notes

18 19 20 21 22 23 24