Altinex VM2218PS User Manual

V-MATRIX
Basic Enclosure and Power Supply
MANUAL PART NUMBER: 400-0169-001
VM2218PS
TM
V-MATRIX POWER SUPPLY
USER’S GUIDE
Page
PRECAUTIONS / SAFETY WARNINGS .............. 2
GENERAL......................................................... 2
INSTALLATION................................................. 2
CLEANING........................................................2
FCC / CE NOTICE............................................. 2
V-MATRIX
ABOUT YOUR
TECHNICAL SPECIFICATIONS...........................3
DESCRIPTION OF INSTALLING YOUR
OPERATION ........................................................ 5
TROUBLESHOOTING GUIDE ............................. 5
ALTINEX POLICY.................................................6
LIMITED WARRANTY....................................... 6
RETURN POLICY ............................................. 6
CONTACT INFORMATION............................... 6
This manual covers: VM2218PS - Power Supply
VM2218PS
VM2218PS
VM2218PS
................................... 3
............................ 4
........................... 5
1
1
V-MATRIX
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
VM2218PS
for future reference. These safety instructions are to ensure the long life of your Supply and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
1.1 GENERAL
Qualified ALTINEX service personnel, or their
authorized representatives must perform all service.
1.2 INSTALLATION
To prevent fire or shock, do not expose this
unit to rain or moisture. Do not place the
VM2218PS
heat radiating appliances, or near any liquid. Exposure to direct sunlight, smoke, or steam can harm internal components.
Handle your
jarring can damage the unit. If the is not used for an extended period, disconnect the power cord from the power outlet or turn off the main connection.
Power Supply. Keep this manual handy
VM2218PS
in direct sunlight, near heaters or
VM2218PS
carefully. Dropping or
Power
VM2218PS
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmf ul interference in which case the user will be required to correct the int erference at his own expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
1.3 CLEANING
Unplug the
cleaning.
Clean surfaces with a dry cloth. Never use
strong detergents or solvents such as, alcohol or thinner. Do not use a wet cloth or water to clean the unit.
1.4 FCC NOTICE
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer ence, and (2) this device must accept any interference that may cause undesired operation.
This equipment has been tested and f ound to
comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
VM2218PS
power cord before
2
2
V-MATRIX
ABOUT YOUR VM2218PS 2
The
VM2218PS
designed for V-Matrix™…the world’s first Versatile Matrix System by ALTINEX.
The
VM2218PS
when the front panel is in place. It is completely removable and swappable.
The
VM2210BE
VM2218PS
using ALTINEX hardware.
is a dual AC power supply
Power Supply is covered by a filter
may be installed into the
TECHNICAL SPECIFICATIONS 3
FEATURES/
DESCRIPTION
Power
Power Consumption 300 watts max. Convenience AC Outlets 3 (Edison Connectors) Convenience AC Power 10Amp max
Table 1.
VM2218PS
VM2218PS
90-265V AC
3
3
DESCRIPTION OF VM2218PS 4
V-MATRIX
4
4
V-MATRIX
INSTALLING YOUR VM2218PS 5
Step 1.
Step 2.
Step 3.
Step 4.
Place the enclosure.
Attach the using the provided screws to secure it into place.
Connect either of the power entry connectors of the power outlet with the provided power cord. The power supply will work with voltages between 90V-265V.
To remove the enclosure unfasten the screws attached the power supply.
VM2218PS
VM2218PS
VM2218PS
inside the
to the enclosure
VM2218PS
to the
from the
OPERATION 6
The successfully as long as the unit is installed pr operly and other technical specifications are followed.
VM2218PS
Power Supply will operate
TROUBLESHOOTING GUIDE 7
We have carefully tested and have found no problems in the supplied would like to offer sug gestions for the f ollowing
First, make sure that power is connected to the
power-input connectors and input power is within the range of 90-265 VAC.
Make sure that the
attached to the enclosure.
If there is problem with the unit please call
ALTINEX at (714) 990-2300.
VM2218PS
VM2218PS
; however, we
:
is properly
5
5
V-MATRIX
ALTINEX POLICY 8
8.1 LIMITED WARRANTY
ALTINEX warrants that its products and cables are free from defects in materials under normal use and service. This warranty is limited to repairing at company’s factory any part or parts of the product, which upon company’s examination shall disclose to be, thus defective. Products considered defective should be returned to company with transportation charges pre-paid within 2 years (90 days for cables) from date of shipment to the purchaser. The warranty is expressly instead of all other warranties expressed or implied. ALTINEX neither assumes nor authorizes any other person to assume for it any other liability in connection with the sale of the products. This warranty shall not apply to any product that shall have been repaired or altered outside of company’s factory in any way so as, in its judgment, to affect its stability or reliability, or that has been subject to misuse, negligence, or accident.
returned without an RMA number may experience a delay in service.
If your product is out of warranty and needs service, contact the ALTINEX Sales Department for an RMA (Return Material Authorization). Products returned without an RMA number may experience a delay in service. The service charges will be quoted to you before the actual repairs are done.
8.3 CONTACT INFORMATION ALTINEX, INC.
592 Apollo Street Brea, CA 92821 USA
714-990-2300
TEL: TOLL FREE:
www.altinex.com
WEB: E-MAIL: FAX:
714-990-3303
1-800-ALTINEX
solutions@altinex.com
8.2 RETURN POLICY
It is very important to ALTINEX that you receive the products that you have ordered and that this product meets your expectations. In the unlikely event, that an ALTINEX product needs to be returned please follow the policy below:
ALTINEX will accept product returns for a period of 30 days from authorized ALTINEX dealers. Products must be returned in an unopened package.
If a product has been opened, the restock ing fees will apply. For the restocking fee amount, please contact an ALTINEX Sales Representat ive.
If the product is in your possession for more than 30 days, the restocking fees will apply.
ALTINEX will not accept any returns on cables or custom products.
If your product is in warranty and needs service, contact the ALTINEX Sales Department for an RMA (Return Material Authorization). Products
6
6
Loading...