Altinex PNP350, PNP300 User Manual

TABLETOP SOLUTIONS

004

The PNP300 is shown above.

MANUAL PART NUMBER: 400-0114-

PNP300 & PNP350

POP ‘N PLUG®SLIM

INTERCONNECT BOX

USER’S GUIDE

TABLE OF CONTENTS

Page

PRECAUTIONS / SAFETY WARNINGS................ 2

GENERAL..........................................................2

HANDLING ........................................................2

CLEANING.........................................................2

FCC NOTICE.....................................................2

ABOUT YOUR PNP300/350 ....................................3

TECHNICAL SPECIFICATIONS.............................. 3

PRODUCT DESCRIPTION ...................................... 4

APPLICATION DIAGRAMS ...................................... 5

DIAGRAM1: TYPICAL SETUP ..........................5

DIAGRAM2: DIMENSIONS ............................... 6

DIAGRAM3: MOUNTING ..................................7

DIAGRAM4: CABLE CLAMPS...........................8

INSTALLING YOUR PNP300/350.......................... 9

OPERATION............................................................... 9

OPERATING THE POP-UP PANEL ...................9

TROUBLESHOOTING GUIDE...............................10

ALTINEX POLICIES................................................10

LIMITEDWARRANTY/RETURNPOLICIES.....10

CONTACT INFORMATION ..............................10

TABLETOP SOLUTIONS

400-0114-004

1

TABLETOP SOLUTIONS

PRECAUTIONS / SAFETY WARNINGS 1

Please read this manual carefully before using your
PNP300/350 and keep it handy for future reference.
These safety instructions are to ensure the long life
of your PNP300/350 and to prevent fire and shock
hazards. Please read them carefully and heed all
warnings.

1.1 GENERAL

• Do not open the unit or power supply case, there

are high-voltage components inside.

• There are no user serviceable parts inside.

Qualified ALTINEX service personnel must
perform all service on the Pop ‘N Plug.

1.2 HANDLING

• For best results, place the PNP300/350 in a dry

area away from dust and moisture.

• To prevent fire or shock, do not expose this unit

to water or moisture. Do not place the
PNP300/350 in direct sunlight, near heaters, or
heat-radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can
harm internal components.

• Handle the PNP300/350 carefully. Dropping or

jarring can damage the unit.

• Do not pull any cables that are attached to the

PNP300/350.

• Do not place heavy objects on top of the

PNP300/350.

• Never place fingers inside the openings of the

unit.

• If the PNP300/350 interface is not used for an
extended period, disconnect the unit from the
wall to avoid fire, shock, and loss of power.

• We recommend using wall outlets with a Ground
Fault Circuit Interrupter (GFCI) for maximum
protection.

1.3 CLEANING

• Unplug the PNP300/350 before cleaning.

• Clean only with a dry cloth. Never use strong

detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit. Do not open the unit to clean.

1.4 FCC NOTICE

• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and if
not installed and used in accordance with
instructions found herein, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.

• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.

400-0114-004

2

TABLETOP SOLUTIONS

ABOUT YOUR PNP300/350 2

PNP300/350

Pop ‘N Plug Slim Interconnect Box

The PNP300/350 is designed for installation in a
conference room table, podium, or anywhere
computer audio, video, and communications
connections are needed. The Pop ‘N Plug Slim
provides a means of connecting audio, video,
control, and computer video sources into a
presentation system. It is ideal for use together with
ALTINEX computer video interfaces.

The PNP300/350 Pop ‘N Plug Slim interconnect
“pops up” into a raised position to provide access to
connectors. When not in use, it is lowered into the
tabletop providing a clean, smooth finish. The
PNP300/350 uses a tower-type construction with a
pneumatic suspension and a mechanical latching
mechanism.

The PNP300 has one input plate on the front panel
of the unit. The standard plate offers input
connections for the following: AC power (NEMA
5-15R), computer video (15-pin HD), composite
video (RCA), stereo audio (RCAx2), computer
audio (3.5 mm stereo), modem (RJ-11), RS-232
(9-pin D-sub), and network (RJ-45). All signals pass
from the interface plate, through standard cables,
and terminate in the mating connector for easy
connection to the audiovisual system.

The PNP350 Interconnect Box has one input plate
on the front panel of the unit. The standard plate
offers 2 AC power outlets and 6 RJ-45 network
snap-in connectors. All interface connections
include pass-through connectors and cables.

The Pop ‘N Plug Slim Interconnect Boxes are
designed for use with tabletops ranging from

0.25 in (6 mm) to 3.75 in (95 mm) thick.

TECHNICAL SPECIFICATIONS 3

Specifications are subject to change.
See www.altinex.com for up-to-date information.

FEATURES/
DESCRIPTION

PNP300 Connectors

AC (NEMA) 5-15R (1) 5-15P (1)
Computer video 15-pin HD F (1) 15-pin HD M (1)
Computer audio 3.5 mm F (1) 3.5 mm M (1)
Composite video RCA F (1) RCA M (1)
Stereo audio RCA F (2) RCA M (2)
Modem RJ-11 F (1) RJ-11 M (1)
Network RJ-45 F (1) RJ-45 M (1)
RS-232 Control DB9 F (1) DB9 M (1)

PNP350 Connectors

AC (NEMA) 5-15R (2) 5-15P (2)
Network RJ-45 F (6) RJ-45 M (6)

Table 1. PNP300/350 General

MECHANICAL PNP300/350

Minimum Table Thickness 0.25 in (6 mm)
Maximum Table Thickness 3.75 in (95 mm)
Length (bezel) 10.03 in (255 mm)
Width (bezel) 3.39 in (86 mm)
Height (opened, above table) 2.19 in (56 mm)
Depth (below table top) 6.14 in (156 mm)
Finish Black
T° Operating (T° Max) 10°C-40°C (50°C)
Humidity

INTERFACE

CONNECTION

90% non-condensing

UNDER TABLE

CONNECTION

400-0114-004

Table 2. PNP300/350 Mechanical

ELECTRICAL PNP300/350
PNP300 90-140 VAC, 5A Max.

PNP350 (each outlet) 90-140 VAC, 5A Max.

Table 3. PNP300/350 Electrical

3

PRODUCT DESCRIPTION 4

TABLETOP SOLUTIONS

3.5mm JACK FOR
STEREO AUDIO

DB9 F CONNECTOR

FOR COMPUTER PORT

15-PIN HD F CONNECTOR

FOR COMPUTER VIDEO

PNP300

RCA JACK

FOR VIDEO

RCA JACK FOR
AUDIO LEFT

RJ-11 JACK FOR
PHONE/MODEM

RCA JACK FOR
AUDIO RIGHT

RJ-45 JACK
FOR NETWORK

NEMA AC POWER
OUTLET

R

PNP300

Slim

400-0114-004

NEMA AC POWER

OUTLET

PNP350

RJ-45 JACKS FOR NETWORK
(6 PLACES)

NEMA AC POWER
OUTLET

R

PNP350

4

Slim

APPLICATION DIAGRAMS 5

DIAGRAM 1: TYPICAL SETUP

DVD PLAYER

RS-232 CABLE

VGA CABLE

STEREO AUDIO

CABLE

TABLETOP SOLUTIONS

AUDIO / VIDEO CABLES

STEREO AUDIO TO
AUDIO DISTRIBUTOR

PNP300

OR AMPLIFIED SPEAKERS

DB9 CABLE TO
REMOTE CONTROLLER

RJ-11 CABLE TO
TELEPHONE LINE

RJ-45 CABLE TO
NETWORK HUB

LAPTOP

AC ADAPTER

ETHERNET
CABLE

RJ-11 MODEM
CABLE

15-PIN HD CABLE
TO DISTRIBUTION

AMPLIFIER OR
COMPUTER
DISPLAY

BLACK, RED, AND YELLOW

RCA CONNECTORS FOR

AUDIO / VIDEO

TO AC SUPPLY OUTLET

400-0114-004

5

DIAGRAM 2: DIMENSIONS

The PNP300 faceplate is shown here.

TOP VIEW

TABLETOP SOLUTIONS

10.033"

[255mm]

3.390"

[86mm]

R

9.530"

[242mm]

FRONT VIEW

(OPEN POSITION)

PNP300

Slim

2.190"

[56mm]

6.140"

[156mm]

2.890"

[73mm]

SIDE VIEW

(OPEN POSITION)

400-0114-004

6

DIAGRAM 3: MOUNTING

The PNP300 faceplate is shown here.

TABLE

TOP

TABLETOP SOLUTIONS

SUPPORT

BRACKET

SET SCREW

SUPPORT

BRACKET

SET SCREW

SUPPORT MOUNT GROOVES
ON THE SIDES OF THE BOX

R

PNP300

Slim

SUPPORT

GROOVES

400-0114-004

MOUNT

7

DIAGRAM 4: CABLE CLAMPS

TABLETOP SOLUTIONS

TABLE

POWER CORD

400-0114-004

ATTACH THE POWER CORD
TO A SECURED SURFACE OR TO
THE TABLE WITH A CABLE CLAMP

8

TABLETOP SOLUTIONS

INSTALLING YOUR PNP300/350 6

Step 1. Cut an opening into the table’s surface.

Refer to the ALTINEX website at

www.altinex.com for the cutout

requirements.
Note: The table can be 0.25 in (6 mm) to

3.75 in (95 mm) thick. Always confirm
dimensions before cutting to ensure that
specifications have not changed.

Step 2. Place the support brackets under the

table and place them between the support
mount grooves on the side of the
PNP300/350 unit. Attach the brackets to
the groove at the desired height and
secure them to the bottom of the table
using the setscrew. There are two support
brackets, one for each side of the unit.

See DIAGRAM 3 for details.

Step 3. Secure the cables by using the provided

cable clamps of the type shown below.

PNP300:

AC power cable = AC power
Black RCA cable = audio left
Red RCA cable = audio right
Yellow RCA cable = composite video
Black DB-15 HD = computer video
DB-9 cable = serial data
Red RJ-45 cable = network
Silver RJ-11 cable = telephone/modem

A round gray cable is also provided for
connection to a stereo audio line.

PNP350:

AC power cable (2) = AC power
Red RJ-45 cables (6) = for independent

network connections

OPERATION 7

7.1 OPERATING THE POP-UP PANEL

To raise the unit, push down on the center of the
top cover of the PNP300/350 until a click is heard
and then let go. The connector panel will pop up to
allow access to the connectors.

Step 4. Pass the power cord from the bottom of

the housing and attach it to the bottom of
the table using the cable clamp and screw
supplied with the PNP300/350. Do not
clamp the cord too tight or too loose.

See DIAGRAM 4 for an example of cable
mounting the cables.

Step 5. Connect the appropriate cables with the

correct input connectors on the bottom of
the unit. The following standard
connections are provided:

400-0114-004

To lower the unit, disconnect all cables on the front
connector panel. Then push down on the center of
the top cover until the latch engages and the unit is
locked in place.

9

TABLETOP SOLUTIONS

TROUBLESHOOTING GUIDE 8

The PNP300/350 supplied unit was carefully tested
and no problems were detected; however, we
would like to offer these suggestions.

• Please make sure that the highest quality video,
audio, network, and telephone cables or
connectors are used.

• Make sure that no cable or power cord is
damaged or pinched. If there has been damage,
then do not use the PNP300/350 unit.
Immediately contact the ALTINEX Customer
Service Department to have the unit repaired.

ALTINEX POLICIES 9

9.1 LIMITED WARRANTY/RETURN POLICIES

Please see the ALTINEX website at

www.altinex.com for details on warranty and

return policies.

9.2 CONTACT INFORMATION ALTINEX, Inc.

592 Apollo Street
Brea, CA 92821 USA

TEL: [phone]
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: [e-mail]

400-0114-004

10