INPUT MODULE
ISV3000
-
I and ISV3000
-
W
MANUAL PART NUMBER: 400-0113-003
1-IN, 1-OUT INTERA COMPOSITE
VIDEO / S-VIDEO + AUDIO INPUT MODULE
USER’S GUIDE
TABLE OF CONTENTS
Page
PRECAUTIONS / SAFETY WARNINGS............... 2
GENERAL..........................................................2
INSTALLATION .................................................2
CLEANING.........................................................2
FCC NOTICE .....................................................2
ABOUT YOUR INPUT MODULE............................. 3
TECHNICAL SPECIFICATIONS ............................. 3
PRODUCT DESCRIPTION...................................... 4
APPLICATION DIAGRAMS...................................... 5
DIAGRAM1: TYPICALSETUP ..........................5
DIAGRAM2: BLOCKDIAGRAM ........................6
INSTALLING YOUR ISV3000.................................. 7
COMPOSITE (C-VIDEO) INPUT & OUTPUT......7
S-VIDEO INPUT & OUTPUT ..............................7
AUDIO INPUT & OUTPUT..................................7
POWER INPUT CONNECTOR ..........................7
POWER/SIGNAL PRESENT LED......................7
OPERATION............................................................... 8
TROUBLESHOOTING GUIDE ................................ 8
ALTINEX POLICIES.................................................. 8
LIMITED WARRANTY/RETURN POLICIES.......8
CONTACT INFORMATION................................8
INPUT MODULE
400-0113-003
1
INPUT MODULE
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
ISV3000. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your ISV3000 and to prevent fire
and shock hazards. Please read them carefully and
heed all warnings.
1.1 GENERAL
• Unauthorized personnel shall not open the unit
since there are high-voltage components inside.
• Qualified ALTINEX service personnel or their
authorized representatives must perform all
service.
1.2 INSTALLATION
• For best results, place the module on a flat, level
surface in a dry area away from dust and
moisture.
• To prevent fire or shock, do not expose this unit
to water or moisture. Do not place the ISV3000
in direct sunlight, near heaters or heat-radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components.
• Handle the ISV3000 carefully. Dropping or
jarring can damage internal components. Do not
place heavy objects on top of the ISV3000.
• Never install the ISV3000 in the same enclosure
with high voltage wires or their associated
components such as power sockets, dimmers,
or switches. Always use proper isolation
techniques to ensure that the ISV3000 is never
installed in an enclosure that has high voltages
present.
1.3 CLEANING
1.4 FCC NOTICE
• This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
• Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could void
the user’s authority to operate the equipment.
• Clean surfaces with a dry cloth. Never use
strong detergents or solvents such as alcohol or
thinner. Do not use a wet cloth or water to clean
the unit.
400-0113-003
2
INPUT MODULE
nced,
ABOUT YOUR INPUT MODULE 2
The ISV3000-I and ISV3000-W are 1-In, 1-Out
Video Input Modules with stereo audio and are
designed for installation into a wall. The ISV3000s
provide stereo audio transmission to a main sound
system and the connection of a composite video
(C-Video) or S-Video source to a distant display
(monitor or projector) with minimal loss of quality.
The front panel of the ISV3000s offer a composite
video loop insulated input, an S-Video input, and
two computer audio inputs. The ISV3000s have an
LED on the front panel which indicates when power
is on or when a signal is present. The front panels
are available in ivory or white. Model number
ISV3000-I is for ivory and ISV3000-W is for white.
The back panel offers a buffered video output
through a 2-pin terminal block or a buffered
S-Video output through a 3-pin terminal block and
balanced stereo output through a 5-pin terminal
block connector. The ISV3000s have a 2-pin
terminal block for connection to a 9V 500mA
external power adapter on their back panels.
The ISV3000 is designed to equalize the effects of
up to 100 ft (30.5 m) of coaxial cable.
TECHNICAL SPECIFICATIONS 3
FEATURES/DESCRIPTION ISV3000s
GENERAL
Inputs
Input Connector RCA female/S-Video
Audio Input Connectors 2 RCA female
Outputs
Video Output Connector 2-pin terminal block
Audio Output Connector 5-pin terminal block
Power
9VDC 500mA supply 2-pin terminal block
Compatibility
Table 1. ISV3000s General
C-Video
NTSC, PAL, SECAM
MECHANICAL ISV3000s
Depth (inches)
Width (inches) 1.5 in (39 mm)
Height (inches) 2.1 in (54 mm)
Weight (pounds) 1.0 lb (0.45 kg)
Ship Weight (pounds) 1.6 lb (0.73 kg)
Material Steel
Finish Black Zinc
Front Panel White or Ivory
T° Operating 10°C -35°C
T° Maximum 50°C
Humidity 90% non-condensing
MTBF (calculations) 40,000 hrs.
4.1 in (105 mm)
Table 2. ISV3000s Mechanical
ELECTRICAL ISV3000s
Input Video Signal
Level 1.5 V max.
Impedance 75 ohm ± 1%
Output Video Signals
Level 1.5 V p-p max.
Impedance 75 ohm
Frequency Compatibility
Minimum Video Bandwidth -3 dB @ 100 MHz
Audio Input
Impedance 10 kohms
Max Level 0 dBu
Audio Throughput
Gain
Frequency Response
Noise Floor -98 dB @ 20 kHz
CMRR <40 dB, 10Hz-20 kHz
Audio Output
Impedance
Drive >10 dBu
Power
External Power 9 VDC 500 mA
+6 dB balanced, 0 dB
unbalanced
10 Hz to 20 kHz
(+/- 0.05 dB)
300 ohms unbala
600 ohms balanced
Table 3. ISV3000s Electrical
400-0113-003
3
PRODUCT DESCRIPTION 4
INPUT MODULE
400-0113-003
+9VDC IN
2-PIN TERM. BLOCK
S-VIDEO OUT
3-PIN TERM. BLOCK
C-VIDEO OUT
2-PIN TERM. BLOCK
BALANCED STEREO
OUTPUT
5-PIN TERM. BLOCK
4
APPLICATION DIAGRAMS 5
DIAGRAM 1: TYPICAL SETUP
INPUT MODULE
400-0113-003
5
DIAGRAM 2: BLOCK DIAGRAM
INPUT MODULE
OUTPUT 3-PIN
TERM. BLOCK
INPUT
S-VIDEO
4-PIN MINI DIN
INPUT
C-VIDEO
RCA YELLOW
WHITE LEFT
CHROMA
LUMA
INPUT
AUDIO RCA
RED RIGHT
INPUT
AUDIO RCA
AC
AC
SIGNAL
DETECT
GREEN
AC
AC
AC
AC
CHROMA
LUMA
OUTPUT 2-PIN
TERM. BLOCK
C-VIDEO
R+
R-
L+
L-
OUTPUT 5-PIN
TERM. BLOCK
AUDIO
POWER 9V, 0.5A
400-0113-003
INPUT 2-PIN
TERM. BLOCK
POWER
SUPPLY
RED
6
INPUT MODULE
INSTALLING YOUR ISV3000 6
The ISV3000s will operate successfully as long as
all cables are attached properly and other technical
specifications are maintained. The ISV3000s use
terminal block connectors on the back which allow
an easy connection to different types of projectors
or monitors using ALTINEX cables.
4.1 COMPOSITE (C-VIDEO) INPUT & OUTPUT
The ISV3000 accepts a C-Video, loop-insulated
input through a yellow RCA female connector and
offers a buffered C-Video output through a 2-pin
terminal block on the back of the ISV3000.
2-PIN TERMINAL BLOCK CONNECTIONS
PIN OUTPUT SIGNAL
1
2
4.2 S-VIDEO INPUT & OUTPUT
The ISV3000 accepts an S-Video input through a
4-pin Mini DIN connector and offers a buffered
S-Video output through a 3-pin terminal block on
the back of the ISV3000.
3-PIN TERMINAL BLOCK CONNECTIONS
PIN OUTPUT SIGNAL
1
2
3
C-Video
Shield/Return
Luma
Shield/Return
Chroma
4.3 AUDIO INPUT & OUTPUT
The ISV3000 accepts audio input and offers
balanced stereo output through a terminal block
connector on the back panel. There are two RCA
female connectors (red and white) for audio input,
which may be returned to an amplifier. A 5-pin
terminal block is available for stereo audio
transmission to the main sound system.
5-PIN TERMINAL BLOCK CONNECTIONS
PIN OUTPUT SIGNAL
1
2
3
4
5
4.3 POWER INPUT CONNECTOR
The ISV3000 Input Module has a 2-pin terminal
block for connection to a 9 V 500 mA external
power adapter. A selection of several power
adapters is available for different countries from
110 VAC to 240 VAC.
4.4 POWER/SIGNAL PRESENT LED
The ISV3000 Input Module has an LED on the front
panel which provides feedback to the user. When
power is connected to the ISV3000, the LED will
turn red. When a video source is connected to the
ISV3000, the LED will turn green, indicating that
the unit is receiving a signal.
+L (Left Channel)
-L (Left Channel)
SIGNAL RETURN
+R (RIGHT Channel)
-R (RIGHT Channel)
400-0113-003
7
INPUT MODULE
OPERATION 7
The ISV3000 will operate successfully as long as
all cables are attached properly and other technical
specifications are maintained.
TROUBLESHOOTING GUIDE 8
We have carefully tested and found no problems in
the supplied ISV3000. However, we would like to
offer the following suggestions:
1. Make sure that the display equipment is
compatible with the source equipment.
2. Make sure the input amplitude of the video
analog signal is less than 1.5 Vp-p.
3. Use the ALTINEX provided external AC
power adapter which supplies 9 VDC at
500 mA.
4. Verify coaxial cable is being used for
component and video signals and that
twisted pair cables are being used for audio
channels. We recommend ALTINEX-made
cables for best results.
ALTINEX POLICIES 9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
www.altinex.com for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB: www.altinex.com
E-MAIL: solutions@altinex.com
5. If a problem arises after continuous usage
at high voltages, high temperatures, high
humidity, or at other extreme environmental
conditions, please correct the problem.
400-0113-003
8
Loading...