Altek AI Camera
Quick Start
p1
Product Specifications
• Model name: AICAMX2
• Sensor: 1/1.8“ CMOS
• Max resolution: 8MP
• Operating temperature: -˚C ~ 4 ˚C
• Focal Length: 4mm
• F number: F1.8
• USB: Type C (DC in only)
p2
Parts and Controls
p3
Before start
• Register account at
• Log in by your azure account to Azure portal.
• Choose + Create a resource, then choose Internet of Things.
Then, create your own Iot hub and Iot Edge
(Refer to
• Choose + Create a resource, then choose Internet of Things.
Then, create your own Iot hub and Iot Edge
• Copy the value of either Connection string—primary key or Connection string—
secondary key to a notepad that you will use later.
A connection string looks like
https://docs.microsoft.com/en-us/azure/iot-fundamentals/ for detail)
HostName=xxxxxxxxxx.azuredevices.net;DeviceId=xxxxxxxxxxxx;SharedAccessKey=xxxxxxxxxxxxxxxxxxxxxx
https://azure.microsoft.com/
xxxxxxxxxxxxxxx
p4
Add iot edge device at Azure cloud
p5
Select your device
, and set module
p6
Add Iot Edge module
p7
Setup for vison module
• codes snippet in Container Create Options
{
"HostConfig": {
"Binds": [
"/data/misc/camera:/app/vam_model_folder"
],
"NetworkMode": "host"
},
"NetworkingConfig": {
"EndpointsConfig": {
"host": {}
}
}
}
• Press Save one aove ready
p8
Click Configure advanced Edge Runtime settings button at the
bottom and add this line "User": "root", in Create Options.
Then, press save and next
p9
Submit your setting
p10
Get connection string from azure cloud first.
Then, input connection string by OOBE process to device
p11
OOBE by webpage -1
• Connect device with PC via Wi-Fi
You can check your SSID and password at
bottom of device
( Default password is 12345678 if there is no
label at bottom)
• URL: setaicamera.ms
p12
OOBE by webpage -2
• Press next directly at 1stpage if you dont
want change device wi-fi password and
ssh account
• Scan and select available wi-fi ap for
internet access
p13
OOBE by webpage -3
• Input your connect string at webpage
p14
Connection to Iot Edge
• After OOBE, wait for connection confirmation feedback from web site
once edgeAgent is run
• You can check by below adb shell cmd
– docker ps
• Device will automatically run Iot Edge next boot-up no matter internet is
available or not
p15
p16
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
the FCC Rules. These limits are designed
nd can radiate radio frequency
e instructions, may cause harmful interference to radio communications. However, there is no
radio or television reception, which
Any changes or modifications not expressly approv
ed by the grantee of this device could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses a
energy and, if not installed and used in accordance with th
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6
W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power
level in different channels.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of
www.fcc.gov/eot/ea/fccid after searching on FCC ID: 2ACQ9-16880002
To ensure that RF exposure levels remain at or below the tested levels, use a belt-clip, holster, or similar accessory that maintains a minimum
separation distance of 5mm between your body and the device.
Loading...