Industrial Metal Case Single Phase
and Three Phase Power Supply
The Altech Industrial metal case power supplies have been optimized for use in
practically any DC power applications, with a wide range of AC/DC inputs and an
extended temperature range of -20° C up to +70° C. These metal case power supplies
feature a small housing design and high power reserve. Excellent electrical
specifications and high immunity against fluctuations in input voltage make these metal
case modules the best choice to industrial automation. Altech’s metal case power
supplies are available in six single-phase and four three-phase models with 12VDC (75W
and 120W), 24 VDC and 48VDC output voltages, and up to 40A output currents. This
voltage range enables the Industrial metal case supplies to be used in virtually any
single-phase or three-phase application. The Industrial metal case power supply series
offers users easy wiring with screw terminal blocks and snap-on DIN-rail mounting.
Designed for use in numerous applications around the world, this power supplies are UL
and CSA approved, CE marked and ROHS compliant. They feature a rugged metal
housing, vibration- and shock-proof construction and provide a cost-effective power
delivery solution for basic functionality requirements.
Single Phase Power Supply:
• Input voltage range: 85-264V AC / 120-370V DC
• AC inrush current: Cold start: 20A at 115V AC, 40A at 230V AC
• Overload voltage protection: 105%-160% constant current limiting auto-recovery
• Over-voltage protection: 115%-135% rated output voltage
• Setup, rise, hold up time: 500ms; 70ms; 30ms at full load and 230V AC
• Working temperature: -20 to +50°C (-4° to +122°F) at 100%
+60°C (+140°F) at 80% load
Three Phase Power Supply:
• Three phase input
• Input voltage range: 340-550V AC / 480-760V DC
• AC inrush current: Cold start: 50A
• Overload voltage protection: 105%-150% constant current limiting auto-recovery
• Over-voltage protection: 115%-135% rated output voltage
• Setup, rise, hold up time: 1200ms, 40ms, 20ms @ 400V AC
800ms, 40ms, 40ms @ 500V AC full load
• Working temperature: -20 to +70°C (-4 to +158°F) at 100%
• EMC standards: EN61000-6-2 (EN50082-2)
Heavy Industrial Level; criteria A
• Military standard: MIL-HDBK-217K
PS Series - Metal Case
Features:
• Universal AC input / Full range
• Single phase or Three phase
• Built in active PFC function
• Protections: Short circuit / Overload / Overvoltage / Over temperature
• Cooling by free air convection
• DIN rail mountable
• UL 508 (industrial control equipment) approved
• LED indicator for power on
• 100% full load burn-in test
• 3 year warranty
35mm DIN Rail
mounting
Rugged metal housing
DC on LED signal
Universal Input
Easy to understand
layout panel
UL508 Compliance
CE Compliance
Multiple output connector
for easy wiring
Narrow for maximized
panel space
75-240W Single Phase POWER SUPPLIES
75W Single Output DIN Rail Power Supply
Cat. No. Output Tol. Ripple & Efficiency NOTES
DC A % Noise
V
S-7512 12V DC 6.3A ±2% 100 mVp-p 76%
P
PS-7524 24V DC 3.2A ±1% 150 mVp-p 80%
PS-7548 48V DC 1.6A ±1% 240 mVp-p 81%
120W Single Output DIN Rail Power Supply
Cat. No. Output Tol. Ripple & Efficiency NOTES
V DC A % Noise
PS-12012 12V DC 10A ±2% 80 mVp-p 80%
PS-12024 24V DC 5A ±1% 80 mVp-p 84%
PS-12048 48V DC 2.5A ±1% 100 mVp-p 85%
120W High Input Single Output DIN Rail Power Supply
Cat. No. Output Tol. Ripple & Efficiency NOTES
V DC A % Noise
PSH-12024 24V DC 5A ±1% 80 mVp-p 85%
PSH-12048 48V DC 2.5A ±1% 80 mVp-p 86%
240W Single Output DIN Rail Power Supply with PFC Function
Cat. No. Output Tol. Ripple & Efficiency NOTES
V DC A % Noise
PSP-24024 24V DC 10A ±1% 80 mVp-p 84%
PSP-24048 48V DC 5A ±1% 150 mVp-p 85%
Pin No.
P
in No.
1
1,2
2
3
,4
3
Assi gnment
A
ssignment
F
G
A
C/L
AC/N
DC OUTPUT +V
D
C OUTPUT -V
T
erminal Pin. No Assign. (TB1)
Terminal Pin. No Assign. (TB2)
P
in No. Pin No.
11,2
2
3,4
3
A
ssignment Assignment
FG
AC/L
A
C/N
DC OUTPUT +V
DC OUTPUT -V
Terminal Pin. No Assign. (TB1)
Terminal Pin. No Assign.
(TB2)
Terminal Pin. No Assign. (TB1)
Terminal Pin. No Assign. (TB2)
1
1,2
2
3,4
3
Ass ig nm en t
Ass ig nm en t
FG
AC/ L( L1 )
AC/ N( L2 )
1
0
0
5
5
.
5
12
5
.
2
1
0
0
6
5
.
5
12
5
.
2
1
0
0
6
5
.
5
12
5
.
2
Pin No.
Pin No.
1
1,2
2
3,4
3
Assi gnment
Assignment
FG
AC/L
AC/N
DC OUTPUT +V
DC OUTPUT -V
Terminal Pin. No Assign. (TB1)
Terminal Pin. No Assign. (TB2)
1
0
0
1
2
5
.
5
2
5
.
2
SPECIFICATIONS
PS-75
Series
PS-120
Series
(Switch Select)
niversal Input: 85-264V AC, 120-370V DC full range,
U
onnection: Input - 3 poles, Output – 4 poles screw terminal
C
Size (WxHxD): 55.5x125x100mm (2.20x4.95x3.95 inches)
Packaging: 1/box; 1.35lbs / 0.60Kg
.6A @ 115V AC, 0.96A @ 230V AC
1
PSH-120
High Input
Series
PSP-240
Series
Switch select Input: 88-132V AC / 176-264 V AC, 248-370V DC range,
2.6A @ 115V AC, 1.6A @ 230V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 65.5x125x100mm (2.56x4.95x3.95 inches)
Packaging: 1/box; 1.75lbs / 0.79Kg
Universal Input: 340-550V AC, 480-780V DC range,
0.65A @ 400V AC, 0.6A @ 500V AC
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 65.5x125x100mm (2.56x4.95x3.95 inches)
Packaging: 1/box; 1.65lbs / 0.75Kg
Universal Input: 85-264V AC, 120-370V DC full range,
2.8A @ 115V AC, 1.4A @ 230V AC
Built in active Power Factor Correction function. PF>0.95
Connection: Input - 3 poles, Output – 4 poles screw terminal
Size (WxHxD): 125x125x100mm (4.95x4.95x3.95 inches)
Packaging: 1/box; 2.7lbs / 1.2Kg
Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
SAFETY & EMC
OTHERS
PS-75 Series
Specifications
Features:
• Universe al AC input / full range
• Protections: Short Circuit / Over load /
Overvoltage / Over temperature
• Cooling by free air convection
• DIN rail mountable
• UL508 (industrial control equipment) approved
• LED indicator for power on
• 100% full load burn-in test
• Fix switching frequency at 50KHz
• 3 year warranty
Cat. No. PS-7512 PS-7524 PS-7548
DC VOLTAGE 12V 24V 48V
RATED CURRENT 6.3A 3.2A 1.6A
CURRENT RANGE 0 ~ 6.3A 0 ~ 3.2A 0 ~ 1.6A
RATED POWER 76W 76.8W 76.8W
RIPPLE & NOISE (max) 100mVp-p 150mVp-p 240mVp-p
VOLTAGE ADJ. RANGE 12 ~ 14V 24 ~ 28V 48 ~ 53V
VOLTAGE TOLERANCE ±2.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±1.0% ±1.0% ±1.0%
SETUP, RISE TIME 1000ms, 60ms / 230VAC 1800ms, 60ms / 115VAC at full load
HOLD UP TIME (Typ.) 60ms / 230VAC 12ms / 115VAC at full load
VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 76% 80% 81%
AC CURRENT (max.) 1.6 A / 115VAC 0.96A / 230VAC
INRUSH CURRENT (Typ.) COLD START 20A / 115VAC 40A / 230VAC
LEAKAGE CURRENT ≤ 1mA / 240VAC
OVERLOAD 105 ~ 150% rated output power
OVERVOLTAGE 15 ~ 16.5V 29 ~ 34V 58 ~ 65V
OVERTEMPERATURE 85˚C ± 5˚C (TSW1) detect on heat sink of power transistor
WORKING TEMP. -10 ~ +60˚C (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85˚C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03% / ˚C (0 ~ 50˚C)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes
MOUNTING Compliance to IEC60068-2-6
SAFETY STANDARDS UL508
WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI CONDUCTION & RADIATION Compliance to EN55011; EN55022 (CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2)
MTBF 123.1K hrs min. MIL-HDBK-217K (25˚C)
DIMENSION 55.5x125.2x100mm (WxHxD)
PACKING 0.6Kg; 20pcs / 13Kg / 1.29CUFT
Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Protection type: Shut down overvoltage, re-power on to recover
Protection type: Shut down overvoltage, recovers automatically after temperature goes down
EN60950-1 compliant
heavy industry level; criteria A
The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed
that it still meets EMC directives.
All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25˚C of ambient temperature.
-10 0 10 20 30 45 50 60
20
40
60
80
100
12V
24V,48V
85
90 105
125 145 165 185 205 225 265245
100
90
80
70
60
50
40
Termina l Pin. N o Ass ignme nt (TB1)
Termina l Pin. N o Ass ignme nt (TB2)
Pin No.
Pin No.
1
1,2
2
3,4
3
Assignment
Assignment
FG
AC/L
AC/N
DC O U TPU T +V
DC O U TPU T -V
132
TB 1
TB 2
LE D
2
4
3
1
125.2
100
5
5.5
(VER TICAL)
M
echanical Specification
AMBIENT TEMPERATURE (°C)
LOAD
(%)
Derating Curve
Block Diagram
INPUT VOLTAGE (VAC) 60Hz
LOAD
(%)
Output Derating VS Input Voltage
O.V. P.
CON TR OL
FG
I/P
-V
+V
REC TI FI ERS
&
FILT ER
SWI TC HI NG
POW ER
FILT ER
&
REC TI FI ERS
FILT ER
EMI
O.L .P.
DET EC TI ON
CIR CU IT
PWM
O.T. P.
Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
SAFETY & EMC
OTHERS
PS-120 Series
Specifications
Features:
• Universal AC input / full range
• Protections: Short Circuit / Over load /
Overvoltage/Over temperature
• Cooling by free air convection
• DIN rail mountable TS-35/ 7.5 or 1 5
• UL 508 (industrial control equipment) approved
• LED indicator for power on
• 100% full load burn-in test
• Fix switching frequency at 50KHz
• 3 year warranty
Cat. No. PS-12012 PS-12024 PS-12048
DC VOLTAGE 12V 24V 48V
RATED CURRENT 10A 5A 2.5A
CURRENT RANGE 0 ~ 10A 0 ~ 5A 0 ~ 2.5A
RATED POWER 120W 120W 120W
RIPPLE & NOISE (max) 80mVp-p 80mVp-p 100mVp-p
Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor.
VOLTAGE ADJ. RANGE 12 ~ 14V 24 ~ 28V 48 ~ 53V
VOLTAGE TOLERANCE ±2.0% ±1.0% ±1.0%
Tolerance: includes set up tolerance, line regulation and load regulation.
LINE REGULATION ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±1.0% ±1.0% ±1.0%
SETUP, RISE TIME 500ms, 70ms / 230VAC 500ms, 70ms / 115VAC at full load
HOLD UP TIME (Typ.) 36ms / 230VAC 32ms / 115VAC at full load
VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC by switch 120 ~ 185VDC / 248 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 80% 84% 85%
AC CURRENT (max.) 2.6 A / 115VAC 1.6A / 230VAC
INRUSH CURRENT (Typ.) COLD START 20A / 115VAC 40A / 230VAC
LEAKAGE CURRENT ≤ 3.5mA / 240VAC
OVERLOAD 105 ~ 150% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed
OVERVOLTAGE 15 ~ 16.5V 29 ~ 33V 58 ~ 65V
Protection type: Shut down overvoltage, re-power on to recover
OVERTEMPERATURE 85˚C ± 5˚C (TSW1) 90˚C ± 5˚C (TSW1) 90˚C ± 5˚C (TSW1)
Protection type: Shut down overvoltage, recovers automatically after temperature goes down
WORKING TEMP. -10 ~ +60˚C (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85˚C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03% / ˚C (0 ~ 50˚C)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes
MOUNTING Compliance to IEC60068-2-6
SAFETY STANDARDS UL508
UL60950-1
EN60950-1 compliant
WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI CONDUCTION & RADIATION Compliance to EN55011; EN55022 (CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2);
heavy industry level; criteria A
The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed
that it still meets EMC directives.
MTBF 136.8K hrs min. MIL-HDBK-217K (25˚C)
DIMENSION 65.5x125.2x100mm (WxHxD)
PACKING 0.79Kg; 20pcs / 16.5Kg / 1.29CUFT
All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25˚C of ambient temperature.
Ta=25
213
TB 1
TB 2
4
213
LE D
125.2
65.5
100
115 VA C
2
30VA C
Terminal Pin. N o Assign ment (T B1)
Terminal Pin. N o Assign ment (T B2)
P
in No .
Pin No .
1
1,2
2
3,4
3
A
ssignment
Assignment
FG
AC/L
AC/N
DC O U TPU T +V
DC O U TPU T -V
-10 0 10 2 0 30 45 5 0 60
20
40
60
80
100
12V,24V
48V
100
200
85
170160
8
80
180 190
9590
12
16
20
24
115
230210 220
110105
250240 260
125120 130
28
32
80
100
150
200
250
300
350
(VER TICAL)
Mechanical Specification
AMBIENT TEMPERATURE (°C)
LOAD
(%)
Derating Curve
Block Diagram
INPUT VOLTAGE (VAC) 60Hz
LOAD
(%)
Static Characterisitcs (24V)
O
UTPU
T RIPP
LE (m
Vp-p)
O.V. P.
CON TR OL
FG
I/P
-V
+V
REC TI FI ERS
&
FILT ER
SWI TC HI NG
POW ER
FILT ER
&
REC TI FI ERS
FILT ER
EMI
O.L .P.
DET EC TI ON
CIR CU IT
PWM
O.T. P.
230
115
Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
SAFETY & EMC
OTHERS
PSH-120 High Input Series
Specifications
Features:
• Universal AC input / full range
• Protections: Short Circuit / Overload / Over Voltage /
Overtemperature
• Cooling by free air convection
• Built-in constant current limiting circuit
• DIN rail mountable
• EN61000-6-2(EN50082-2) industrial immunity level
• 100% full load burn-in test
• Fixed switching frequency at 70KHz
• 3 year warranty
Cat. No. PSH-12024 PSH-12048
DC VOLTAGE 24V 48V
RATED CURRENT 5A 2.5A
CURRENT RANGE 0 ~ 5A 0 ~ 2.5A
RATED POWER 120W 120W
RIPPLE & NOISE (max) 80mVp-p 80mVp-p
VOLTAGE ADJ. RANGE 24 ~ 28V 48 ~ 55V
VOLTAGE TOLERANCE ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5%
LOAD REGULATION ±0.5% ±0.5%
SETUP, RISE, HOLD UP TIME 1700ms, 120ms, 16ms / 400VAC 1000ms, 120ms, 30ms / 500VAC at full load
VOLTAGE RANGE 340 ~ 550VAC 480 ~ 780VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 85% 86%
AC CURRENT (max.) 0.65A / 400VAC 0.6A / 500VAC
INRUSH CURRENT (max.) COLD START 50A
LEAKAGE CURRENT ≤ 3.5 mA / 530VAC
OVERLOAD 105 ~ 160% rated output power
OVERVOLTAGE 30 ~ 36V 59 ~ 66V
OVERTEMPERATURE 85˚C ± 5˚C (TSW: detect on heat sink of power switch)
WORKING TEMP. -20 ~ +60˚C (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +85˚C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03% / ˚C (0 ~ 50˚C)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes
MOUNTING Compliance to IEC60068-2-6
SAFETY STANDARDS UL60950-1 approved
WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC (25˚C; 70% RH)
EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11); EN55022 (CISPR22); EN61204-3 Class B
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN61204-3; EN61000-6-2; (EN50082-2),
MTBF 178.7K hrs min. MIL-HDBK-217K (25˚C)
DIMENSION 65.5x125.2x100mm (WxHxD)
PACKING 0.75Kg; 20pcs / 16Kg / 1.29CUFT
R
ipple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Protection type: Shut down overvoltage, re-power on to recover
Protection type: Shut down overvoltage, recovers automatically after temperature goes down
IEC60950-1 CB compliant
heavy industry level; criteria A
The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed
that it still meets EMC directives.
All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25˚C of ambient temperature.
20
40
50
60
80
100
1
1,2
2
3,4
3
Ass ig nm en t
Ass ig nm en t
FG
AC/ L1
AC/ L2
213
TB2
TB1
4
213
LED
125 .2
6
5.5
100
O.V. P.
CON TR OL
FG
I/P
-V
+V
REC TI FI ER S
&
FILT ER
SWI TC HI NG
POW ER
FILT ER
&
REC TI FI ER S
FILT ER
EMI
O.L .P.
DET EC TI ON
CIR CU IT
PWM
O.T. P.
CUR RE NT
LIM IT
Mechanical Specification
Derating Curve
Block Diagram
Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
OUTPUT
INPUT
PROTECTION
ENVIRONMENT
SAFETY & EMC
OTHERS
PSP-240 Series
Specifications
Features:
• Universal AC input / full range
• Built in active PFC function
• Protections: Short Circuit / Overload / Overvoltage /
Over temperature
• Cooling by free air convection
• DIN rail mountable
• UL 508(industrial control equipment)approved
• LED indicator for power on
• 100% full load burn-in test
• Fixed switching frequency at 100KHz
• 3 year warranty
Cat. No. PSP-24024 PSP-24048
DC VOLTAGE 24V 48V
RATED CURRENT 10A 5A
CURRENT RANGE 0 ~ 10A 0 ~ 5A
RATED POWER 240W 240W
RIPPLE & NOISE (max) 80mVp-p 150mVp-p
VOLTAGE ADJ. RANGE 24 ~ 28V 48 ~ 53V
VOLTAGE TOLERANCE ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5%
LOAD REGULATION ±1.0% ±1.0%
SETUP, RISE TIME 800ms, 40ms / 230VAC 800ms, 40ms / 115VAC at full load
HOLD UP TIME (Typ.) 24ms / 230VAC 24ms / 115VAC at full load
Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1µF & 47µF parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) 0.96 / 230VAC 0.99 / 115VAC at full load
EFFICIENCY (Typ.) 84% 85%
AC CURRENT (max.) 2.8A / 115VAC; 1.4A / 230VAC
INRUSH CURRENT (Typ.) COLD START 27A / 115VAC 45A / 230VAC
LEAKAGE CURRENT ≤ 3.5mA / 240VAC
OVERLOAD 105 ~ 150% rated output power
OVERVOLTAGE 30 ~ 36V 54 ~ 60V
OVERTEMPERATURE 100˚C ± 5˚C (TSW: detect on heat sink of power transistor)
WORKING TEMP. -10 ~ +70˚C (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85˚C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03% / ˚C (0 ~ 50˚C)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each long X,Y, Z axes
MOUNTING Compliance to IEC60068-2-6
SAFETY STANDARDS UL508
WITHSTAND VOLTAGE I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC
EMI CONDUCTION & RADIATION Compliance to EN55011; EN55022 (CISPR22) Class B
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204; EN55024; EN61000-6-2; (EN50082-2);
erating may be needed under low input voltages, please check the derating curve for more detail
D
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Protection type: Shut down overvoltage, re-power on to recover
Protection type: Shut down overvoltage, recovers automatically after temperature goes down
UL60950-1
EN60950-1 compliant
heavy industry level; criteria A
The power supply is considered a component which will installed into a final equipment. The final equipment must be re-confirmed
that it still meets EMC directives.
MTBF 289.9K hrs min. MIL-HDBK-217K (25˚C)
DIMENSION 125.5x125.2x100mm (WxHxD)
PACKING 1.2Kg; 12pcs / 15.5Kg / 1.29CUFT
All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25˚C of ambient temperature.
Ta=25
-1001020304050556070
Vin:
230VA C
110VAC
--
20
40
60
80
100
100
40
85 110
50
60
70
80
155135 230 264
90
100
(VERTI CAL)
110VAC
230VA C
CIR CU IT
DET EC TI ON
O.L .P.
REC TI FI ERS
CIR CU IT
POW ER
SWI TC HI NG
FILT ER
&
REC TI FI ERS
+V
-V
I/P
FG
CON TR OL
PWM & P FC
O.V. P.
&
EMI FILTER
PFC
CUR RE NT
LIM IT IN G &
CON STANT
O.T. P.
1
1,2
2
3,4
3
Ass ig nm ent
Ass ig nm ent
F
G
AC/ L
A
C/N
125 .5
125 .2
1
00
T
B2
3
T
B1 L ED
21 1234
M
echanical Specification
Derating Curve
Block Diagram
Output Derating VS Input Voltage
Note: All dimensions are in millimeters, to convert to inches multiply by 0.03937.
Loading...