Contents
Introduction......................................................................................3
Specifications................................................................................................................ 3
Precautions.................................................................................................................... 4
System Requirements.................................................................................................. 4
Package Content.......................................................................................................... 4
Product Overview .........................................................................................................5
1. Use as External USB HDD........................................................6
1.1 Insert Hard Disk.......................................................................................... 6
1.2 Format Built-in HDD via USB ..................................................................7
1.2.1 Windows 98SE, ME............................................................................................ 7
1.2.2 Windows 2000.....................................................................................................9
1.2.3 Windows XP ......................................................................................................11
1.3 Copy Data via USB ..................................................................................13
1.3.1 Windows 98SE..................................................................................................13
1.3.2 Windows ME...................................................................................................... 14
1.3.3 Windows 2000, XP ........................................................................................... 15
1.3.4 Linux................................................................................................................... 16
1.3.5 Mac..................................................................................................................... 16
2. Use as Multimedia Player ...........................................................17
2.1 Connect to External AV Device ............................................................17
2.1.1 Connect Video Cable ....................................................................................... 17
2.1.2 Connect Audio Cable ....................................................................................... 18
2.1.3 Connect External IR Receiver......................................................................... 18
2.2 Basic Setup ...............................................................................................19
2.2.1 Video Setup....................................................................................................... 19
2.2.2 Audio Setup....................................................................................................... 21
2.2.3 Other Setup .......................................................................................................22
2.2.3.1 TV Type Setup............................................................................................... 22
1
2.2.3.2 Jpeg File Preview Setup ...............................................................................22
2.2.3.3 Language Selection Setup............................................................................22
2.2.3.4 Check Firmware Version...............................................................................22
2.3 Basic Screen Menu ..................................................................................23
2.3.1 Media Type Selection .......................................................................................23
2.3.2 File Selection......................................................................................................23
2.4 Play Video Files ........................................................................................24
2.5 Play DVD Files...........................................................................................27
2.6 Play Music Files........................................................................................29
2.7 Play Photo Files........................................................................................31
2.8 Make a Play-List........................................................................................33
2.9 Remote Controls.......................................................................................34
2.10 Others .......................................................................................................35
2.10.1 Music Slide Show............................................................................................35
2.10.2 MP3 Quick Play...............................................................................................35
2.10.3 Change Background Image...........................................................................35
2.10.4 Change OSD Text Color ................................................................................35
2.10.5 Firmware Upgrade ..........................................................................................35
Technical Support........................................................................35
2
Introduction
Portable Mpeg4 Player is 2.5” HDD interface type of MPEG4 player based on USB 2.0 High Speed.
It can be connected to TV in home or a monitor. It is not only an external USB HDD but also the best portable AV
device that displays Music, Movie and photo.
¾ Digital Multimedia Player via Home TV or Car TV
¾ USB 2.0 External Storage via PC(NTFS, FAT32)
¾ Audio - Stereo, Digital Coaxial 5.1ch. Sound
¾ Video - Composite, HD Component 480p, 720p, 1080i
¾ DVD Manager - Playback of DVD File same as Original DVD Title
¾ Easy Firmware Upgrade.
Specifications
Product Name Portable Mpeg4 Plyaer
Power DC 5V / 2A
Weight 160g (without HDD) approx.
Dimension 80 x 148 x 24 mm approx.
Available OS Windows 98SE/ME/2000/XP, Mac OS 9.0 Higher, Linux 2.4 Higher
USB Interface 480Mbps USB 2.0 (USB 1.1 Compatible) / Slave
HDD Type 2.5” IDE HDD
HDD File System NTFS / FAT32
TV Type NTSC / PAL
Movie
Supported Format
Video Output
Audio Output
External IR Support (Optional)
Working Temperature 0˚C ~ 60˚C
Working Humidity 10% ~ 50%
Music MP3, OGG Vorbis, WAV, WMA (except WMA9 pro.lossless)
Photo JPG(JPEG)
MPEG 1, 2, 4 (MPG, MPEG, AVI, M2V, DAT, VOB, IFO etc.)
DivX, XviD (except GMC, Qpel option applied)
COMPOSITE
COMPONENT Y, Pb, Pr (480p, 720p, 1080i Progressive Scan)
STEREO L-R
DIGITAL COAXIAL (DTS Pass-Through Only)
3
Precautions
▪ We strongly recommend you to back up the data to another safe media. We are not responsible for data damage or
loss in built-in HDD.
▪ It’s better unplug the power adaptor when you do not use for a long time.
▪ The Mpeg4 Player does not support the DivX, XviD codec of video files that has GMC, Qpel option.
▪ The Mpeg4 Player supports only “Pass-Through” for DTS Audio codec.
▪ Don’t power off while a file is playing.
▪ If the length of USB cable is too long, it may not be connected smoothly (Recommend: up to 3 meters)
▪ If you have USB 1.1 Host Adapter, Mpeg4 Player is working at USB1.1 speed. Mpeg4 Player
▪ On less than 6GB HDD, data damage or loss may be caused. We recommend you to use more than 6GB HDD.
▪ [Very Important] : If unformatted HDD is insert into Mpeg4 Player, a PC can not detect the HDD. Make sure that the
HDD is formatted.
▪ Be careful of dropping or impact or shock. If a HDD is damaged by dropping, impacting, shocking, then contact
manufacturer or the seller.
▪ We recommend you to use the all supplied cables or accessories that are customized for the best performance of
Mpeg4 Player. Using other cables or accessories may not support the best performance.
▪ [Very Important] : Be away from water, heavy moisture. If Mpeg4 Player has a liquid, unplug from a PC or Power
right away. If you use Mpeg4 Player under this condition, the HDD may be fired or you may have electric shock.
▪ Don’t touch Mpeg4 Player by wet hands. It may cause electric shock.
▪ Be away from heat, a direct ray of light.
▪ Be away from devices that transmit strong magnetic signal. It may cause data damage or loss on HDD.
▪ Don’t disassemble as the user’s own accord. It may cause Mpeg4 Player damaged or loose the data.
System Requirements
▪ Interface : 480Mbps USB 2.0 High-Speed (USB 1.1 compatible)
▪ Power Supply : USB Bus Power or DC Power
▪ Available OS : Windows 98SE/ME/2000/XP, MAC 9.0 higher, Linux 2.4 higher
▪ Available System : Desktop / Laptop PC that has USB port(s)
Package Content
Primary Package
▪ Mpeg4 Player ▪ Remote Control & Battery ▪ USB Cable ▪ AV Cable( Composite + Stereo L-R),
▪ Component Video Cable ▪ Coaxial Audio Cable ▪ Power Adapter ▪ Windows 98 Driver CD ▪ User Manual
Optional Package
▪ External Remote Control IR Receiver ▪ Cigar Jack Lighter
4
Product Overview
① Power Power LED
Front
View
Back
View
② HDD HDD LED
③ IR IR LED
④ IR Receiving Area IR receiving area for remote signals
① USB Connect USB cable
② 5V Connect power Cable
③ IR/5.1 Connect coaxial cable for 5.1 ch. digital audio output
④ SD/HD Connect component Y, Pb, Pr cable for video output
⑤ AV Connect AV cable for composite video and(or) Stereo audio output
- Front View -
④ IR Receiving Area③ IR ① Power
② HDD
- Back View -
① USB
④ SD/HD② 5V
③ IR/5.1 ⑤ AV
(or Connect external remote control IR receiver)
5
1. Use as External USB HDD
1.1 Insert Hard Disk
9 Use 2.5” IDE Hard Disk for Laptop(or Notebook) PC.
9 Hard Disk should be “Master”. However, if the Hard Disk supports “Single” mode, you need to try to set
“Single “mode.
① Grip the hasp and pull back
the front panel, and then open
the top cover.
④ Screw HDD on PCB by using
the supplied screws.
② Pull the PCB out. ③ Grip HDD and insert it into
the pins of PCB (be sure to
match the 44 pins)
⑤ Insert the PCB into the case,
and then close the top cover
and front panel.
6
1.2 Format Built-in HDD via USB
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the
following guide. * If the hard disk drive is already formatted, see “1.3 Copy Data via USB”.
1.2.1 Windows 98SE, ME
1) Install Windows 98 Driver. Find the driver at
Windows 98 CD→Windows 98 Driver Directory.
After finishing installation, Connect Mpeg4 Player to
PC via USB cable. (If not detected, plug power
cable of Mpeg4 Player)
2) Select [Start→Program→Accessories→MS-
DOS Prompt] on Windows.
3) Type “fdisk” command at Command Prompt
window and press [Enter].
4) Type the “Y” at the “Do you wish to enable large
disk support (Y/N)” and press [Enter].
5) Select “5. Change current fixed disk drive” and
press [Enter].
6) Type the last Disk number in 0% usage.
7) Select “1. Create DOS partition or Logical DOS
Drive” and press [Enter].
7
8) Select “ 1. Create Primary DOS Partition ” and
press [Enter].
9) Wait until finishing verifying the drive integrity.
10) After finishing drive integrity verification, type “Y”
at “Do you wish to use the maximum available size for
a Primary DOS Partition (Y/N)”.
11) Type the capacity or % which you want to use and
press [Enter].
12) Drive integrity verification will start again. After
finishing that, press [ESC] key when the “Primary DOS
Partition created, drive letters changed or added”
message displays.
13) Press [ESC] key again. “ Shut down Windows
before restarting” message will be displayed. Press
[ESC] key finally for exiting FDISK.
8
14) Type “ exit ” command at “ C:\WINDOWS> ” and
press [Enter] for returning to windows screen.
15) Unplug the Mpeg4 Player and plug again. New
volume will be appeared at [My Computer]. Click
mouse right button at the new volume and select
[Format].
1.2.2 Windows 2000 1.2.2 Windows 2000
1) Connect Mpeg4 Player to PC via USB cable.
(If not detected, plug power cable of Mpeg4 Player)
2) Select [Start → Settings → Control Panel →
Administrative Tools → Computer Management
→ Disk Management] on Windows.
3) If the [Disk Signature and Upgrade Disk Wizard] is
started, click Next to progress for finishing the wizard.
If this wizard not started, right click the left area of
unallocated drive at no. 4 figure, and start the wizard.
4) After finishing the [Disk Signature and Upgrade
Disk Wizard], Right-click the Unallocated Drive. And
then, click [Create Partition].
Right Click for
starting Disk
Wizard.
9
5) Click [Next] at the Create Partition Wizard
Windows.
6) Check [Primary Partition] and click [Next].
7) Type number that you want to use and click [Next].
8) Assign a drive letter and click [Next].
9) Choose FAT32 or NTFS at File system to use and
click [Next].
9 FAT 32 system is available on windows
98SE/ME/2000/XP, but NTFS system is available on
windows 2000/XP only.
9 If you choose FAT32 system on Windows 2000/XP,
one drive letter’s maximum size will be limited to 32GB. If
you want to use one drive letter of 32GB more, you have
to format on windows 98SE/ME.
9 If you want to create two or more partition with one
disk drive, it will be recommended “Primary Partition”
10) After finishing Wizard setup, formatting will be
progressed automatically.
10
1.2.3 Windows XP 1.2.3 Windows XP
1) Connect Mpeg4 Player to PC via USB cable.
(If not detected, plug the power cable of Mpeg4 Player)
2) Click [Settings→Control Panel→ Administrative
Tools→Computer Management→Disk Management]
on Windows. If you can not find Administrative Tools
at Control Panel, click “ switch to classic view” in
left – up corner on screen.
3) If the [Disk Signature and Upgrade Disk Wizard]
starts, click [Next] to progress for finishing the wizard.
If this wizard not started, right click the marked left
area of unallocated drive at no 4. figure and start the
wizard.
4) After finishing the [Disk Signature and Upgrade
Disk Wizard], Right-click the ‘Unallocated’ Drive. And
then, click [Create Partition].
Right Click for
starting Disk
Wizard.
5) Click [Next] at the New Partition Wizard.
6) Check [Primary Partition] and click [Next].
7) Type number that you want to use and click [Next].
8) Assign a drive letter and click [Next].
11
9) Choose FAT32 or NTFS at File system to use and
click [Next].
9 FAT 32 system is available on windows
98SE/ME/2000/XP, but NTFS system is available on
windows 2000/XP only.
9 If you choose FAT32 system on Windows 2000/XP,
one drive letter’s maximum size will be limited to 32GB. If
you want to use one drive letter of 32GB more, you have
to format on windows 98SE/ME.
9 If you want to create two or more partition with one
disk drive, it will be recommended “Primary Partition”
10) After finishing Wizard setup, formatting will be
progressed automatically.
12
1.3 Copy Data via USB 1.3 Copy Data via USB
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of Mpeg4
It is possible to use as a external USB hard disk drive.. You can copy data from your PC to built-in HDD of Mpeg4
Player via USB. It is possible to play media files at the hard disk on TV set.
Player via USB. It is possible to play media files at the hard disk on TV set.
* If not detected when connecting PC, recommend to connect power cable of Mpeg4 Player. * If not detected when connecting PC, recommend to connect power cable of Mpeg4 Player.
1.3.1 Windows 98SE 1.3.1 Windows 98SE
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD > Windows 98
9First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD > Windows 98
Driver Directory. After finishing installation, Connect Mpeg4 Player to PC via USB cable. If not detected, plug power cable of
Driver Directory. After finishing installation, Connect Mpeg4 Player to PC via USB cable. If not detected, plug power cable of
Mpeg4 Player.
Mpeg4 Player.
1) After installing the driver, connect Mpeg4 Player.
And then, check the driver installation at Windows
[Start→Settings→Control Panel→System →Device
Manager→Hard disk controllers→Hi-Speed USB-IDE
Bridge Controller].
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
9If a new volume is not be appeared, check HDD format or
not, and HDD file system. Windows 98SE only detect FAT32
file system. Or connect power cable of Mpeg4 Player.
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
13
yer
1.3.2 Windows ME
1) After connecting Mpeg4 Player, windows itself will
install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control
Panel > (view all Control Panel options) > System >
Device Manager > Universal Serial Bus controllers >
USB Mass Storage Device]
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
9If a new volume is not be appeared, check HDD format
or not, and HDD file system. Windows ME only detect
FAT32 file system. Or connect power cable of Mpeg4
Pla
.
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
14
1.3.3 Windows 2000, XP
1) After connecting Mpeg4 Player, windows itself will
install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control
panel > (switch to classic View on Windows XP) >
system > Hardware > Device manager > Universal
Serial Bus controllers > USB Mass Storage Device ].
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new volume. You can copy any data to this volume.
9If new volume is not be appeared, check HDD format
or not. and HDD file system. Windows 2000, XP detect
both FAT32 and NTFS file system. Or connect power
cable of Mpeg4 Player.
3) After copying data, remove Mpeg4 Player with
using remove icon at Windows right-down
corner. If you don’t follow this procedure, data and
Mpeg4 Player may have damage.
9When you see ‘Non High-Speed USB Hub Message’
The message will be displayed On windows XP when
you plug Mpeg4 Player into USB 1.1 spec. Host adapter.
15
1.3.4 Linux
9It can be available on Linux 2.4 higher.
[Automatic Mount]
After booting, do log-in.
Connect Mpeg4 Player -> Power On Mpeg4 Player -> Check the detection with [fdisk] -> make Mount Pointer (ex.
mediatest) at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
/dev/sda /mnt/mediatest vfat noauto, user 0 0 (in case of FAT32 HDD)
/dev/sda /mnt/mediatest ntfs noauto, user 0 0 (in case of NTFS HDD)
Do Log-in again.
9above example “sda” is assumed that the Mpeg4 Player will be detected as “sda” on your system. If not, you have to write the
drive name which is detected as “USB Mass Storage”, not “sda”
[Manual Mount]
Connect Mpeg4 Player -> Power On Mpeg4 Player -> Check the detection with [fdisk] -> make Mount Pointer (ex.
mediatest) at Folder Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
mount –t vfat /dev/sda /mnt/mediatest (in case of FAT32 HDD)
mount –t ntfs /dev/sda /mnt/mediatest (in case of FAT32 HDD)
9above example “sda” is assumed that the Mpeg4 Player will be detected as “sda” on your system. If not, you have to write the
drive name which is detected as “USB Mass Storage”, not “sda”
[How to stop using]
Do [unmount] at Device Control.
1.3.5 Mac
9It can be available on Mac 9.0 higher.
No need to install the installation driver at Mac OS 9.x version and the Mpeg4 Player will be detected automatically. If
the Mpeg4 Player is detected correctly, an icon is appeared at a monitor.
When removing Mpeg4 Player safely, drag the icon to a trash and unplug Mpeg4 Player.
16
2. Use as Multimedia Player
2.1 Connect to External AV Device
2.1.1 Connect Video Cable
Mpeg4 Player supports 2 type of video output; “Composite, Component”. Use video connection that your TV supports.
Normally, TV supports composite video connection. Do not connect USB cable when connecting TV.
Supplied
Component
Cable
[Blue]Connect to Pb jack of TV. [Green]Connect to Y jack of TV.
9 When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. “Mpeg4 Player” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output
signal is changed.
3. After you see normal screen, you have to save video configurations of Mpeg4 Player. See “2.2.1 Video Setup”.
•Component Y, Pb, Pr •
: Connect to SD/HD jack of Mpeg4 Player.
Supplied
AV Cable
Blue Red Green`
[Red] Connect to Pr jack of TV.
•Composite•
: Connect to AV jack of Mpeg4 Player.
Yellow White Red
[Yellow] Connect to Composite(CVBS) jack
of TV.
17
2.1.2 Connect Audio Cable
Mpeg4 Player supports 2 type of audio output; “Stereo, Coaxial”. Use audio connection that your TV or Audio set
supports. Do not connect USB cable when connecting TV.
9When you can not hear sound after connecting Coaxial Cable, you have to change audio setup of Mpeg4 Player as Encoded
Digital. See “2.2.2 Audio Setup”
•Coaxial: Digital 5.1 Ch. •
: Connect to IR/5.1 jack of Mpeg4 Player.
Supplied
Coaxial
Cable
Connect to Coaxial jack of Amplifier
or Receiver.
•Stereo•
: Connect to AV jack of Mpeg4 Player.
Supplied
AV Cable
White Yellow Red
Connect to Audio Jacks of TV
White = L (Left) Audio Input / Red = R (Right) Audio Input
2.1.3 Connect External IR Receiver
External IR Receiver is optional package, not primary one.
Connect the external IR receiver to IR/5.1 jack of Mpeg4 Player instead of Coaxial cable. External IR Receiver and
Coaxial cable are not used at the same time.
18
2.2 Basic Setup
2.2.1 Video Setup
This is guide for setting video output of Mpeg4 Player. You have to setup Mpeg4 Player’s video output mode same as
TV set’s video input mode.
9When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user
manual.
2. “Mpeg4 Player” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output
signal is changed.
3. After you see normal screen, you have to save video configurations of Mpeg4 Player.
TV Video
Input Mode
Normal Video
S-Video
Component 480i
Component 480p HD Component Out On 480p
Mpeg4 Player Video
Output Mode
TV Out: NTSC C/S-Video
(HD Component OFF)
TV Out: PAL C/S-Video
(HD Component OFF)
Not supported
Not supported
TV Out: NTSC C/YPbPr
(HD Component OFF)
TV Out: PAL C/YPbPr
(HD Component OFF)
Connection Jack
of TV, Mpeg4 Player
CVBS or Composite Jack
(Generally Yellow Jack)
- -
Component 3 Jack
* Y(Green), Pb(Blue), Pr(Red)
Video Cable Type
Supplied AV Cable
Supplied Component Cable
* Y(Green), Pb(Blue), Pr(Red)
Component 720p HD Component Out On 720p
Component 1080i HD Component Out On 1080i
9NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.
19
① Turn on Mpeg4 Player and press [SETUP] on
MediaType Selection screen.
< Setup Procedure>
② Move to ‘Video Setup’ icon and press
[ENTER].
③ Move to Video Output Mode that you want
and press [ENTER].
④ Finally, press [SETUP] again for saving
configurations.
Example of component video output settings.
20
2.2.2 Audio Setup
This is guide for setting audio output of Mpeg4 Player. You can use Stereo or Digital 5.1 ch..
9Analogue/DCPM: Select when you connect the supplied AV cables (Red / White) to TV or Audio set directly.
9Encoded Digital: Select when you want to listen through 5.1Ch by connecting receiver (or amplifier) with supplied coaxial
cable.
<Setup Procedure>
① Turn on Mpeg4 Player and press [SETUP] in
MediaType Selection screen.
② Move to ‘Audio Setup’ icon and press
[ENTER].
③ Move to Audio Output Mode that you want
and press [ENTER].
④ Finally, press [SETUP] again for saving
configurations.
21
2.2.3 Other Setup
This is guide for setting TV Type, JPEG File Preview, Language Selection. In addition, current firmware version shows.
<Setup Procedure>
① Turn on Mpeg4 Player and press [SETUP] in
MediaType Selection Screen.
Move to ‘② Other Setup’ icon and press
[ENTER].
Move to ③ settings that you want and press
[ENTER].
Finally, press [SETUP] again for saving ④
configurations.
2.2.3.1 TV Type Setup
Select one among 4:3 Letter Box, 4:3 Pan Scan, or 16:9.
2.2.3.2 Jpeg File Preview Setup
It is possible to enable or disable preview the photo file as a thumbnail image before playing.
2.2.3.3 Language Selection Setup
Select one language among English, German, Spanish, French, Italian, Portuguese, Danish, Swedish, or Dutch. User
interface language will be changed according to the language.
2.2.3.4 Check Firmware Version
Current Firmware version will be displayed on the Other Setup screen.
22
2.3 Basic Screen Menu
2.3.1 Media Type Selection
After turning on Mpeg4 Player, you can see MediaType Selection screen. In this screen, you can select “Video”, “Audio”, Photo”
or make “Play-List” with ◀▶ arrow button. Press [ENTER]. Select one media type that you want to play.
2.3.2 File Selection
After selecting a Media type, ‘File Selection’ screen will be displayed. Move to a file that you want to play and press
[ENTER] or [PLAY/PAUSE].
☞ [ENTER] button Play one file that you select. After finishing playback, return to ‘file selection screen’.
☞ [PLAY/PAUSE] button After playing the file that you select, play next all files continuously.
☞ ▲▼ button Move to files with pressing ▲▼arrow buttons.
☞ ◀ button Mov e to left icon with pressing ◀ arrow button. Press ▶ button in order to return to file selection screen.
☞ NEXT▶▶I, PREV I◀◀ button Move to Next or Previous page when there is too many files to list on one screen.
☞ Left Icon Descriptions
Play All
Media Select Go to Media Type Selection directly.
After the file that you select, play next all files continuously. It is same as
[PLAY/PAUSE] button.
23
2.4 Play Video Files
It is possible to play video files like AVI, MPG, MPEG, DAT, M2V, and VOB.
Select ‘Video’ icon in Media Type Selection screen. Video file list will be displayed. Just move to a file and press
[ENTER] or [PLAY/PAUSE] button.
Select ‘Video’ icon in Media Type Selection screen.
< Function and Button Descriptions>
Move to a file and press [ENTER] or [PLAY/PAUSE]
button.
Press [ENTER] for playing just the file or
[PLAY/PAUSE] for playing all files from the selected file.
Remote Control Function Descriptions
It is possible to switch each audio language when the audio
AUDIO Dual Audio
SUBTITLE
Subtitle
Move& Size
Subtitle
Select or Hide
format is dual-audio, for example, including a local language
and English.
It is possible to change subtitle size and location.
◀▶ arrow button changes size and ▼▲ arrow button
changes location. After doing, press [ENTER].
The subtitle name same as video file is displayed on screen
automatically. However, it is possible to open the other
preferable subtitle files or hide.
24
Subtitle
Language Select
Subtitle
Sync.
4, 5, 6
Number Button
Scr. SIZE
TIME SEARCH
CANCEL
Brt. CONT
FILE INFO
FF ▶▶
▶ arrow button
REW ◀◀
◀ arrow button
VOLUME +
▲arrow button
VOLUME -
▼arrow button
MUTE Sound Off
ENTER Playback a File
Subtitle
Color Change
Zoom Vertical Zoom screen vertically.
Zoom Full Enlarge the overall screen.
Custom Enlarge or reduce the screen by ▲▼ ◀▶ arrow buttons.
Default Return to original screen size and position.
Screen Position
Jump to
Preferable
Playback Time
Delete Input
Numbers
Control luminosity,
color depth,
brightness
Show File
Information
Fast Forward
Rewind
Volume Up Volume up.
Volume Down Volume down.
It is possible to switch each subtitle language when the
subtitle is dual language format, for example, including a
local language and English.
* When selecting ‘Discriminating subtitle language’, first subtitle
language will be displayed.
It is possible to set the subtitle sync. with ◀▶(one second)
▼▲(60 second) when motion and subtitle sync is not
matched.
Subtitle color is changed when pressing number 4, 6 button.
In order to return default color (white), press number 5.
Move the screen to the direction with ▼▲◀▶ arrow
buttons. Press [Brt.Cont] key for returning to the original
screen position when applying Screen position.
Move to a selected time of a file.
In time search box, this button deletes all numbers in 0.
When pressing this button, 3 modes switch. After selecting
a mode, change settings with ◀▶ arrow buttons.
Show the file information which is being played. In order to
hide the information, press this button again.
Whenever pressing this button, play speed is changed with
8x, 16x, 32x in forward.
Whenever pressing this button, play speed is changed with
8x, 16x, 32x in backward.
Mute the sound. In order to hear sound, press this button
again.
Play a file. After finishing playback, return to file selections
screen.
25
PLAY / PAUSE
PLAY / PAUSE
Number button
II▶
I▶ I
PREV
I◀◀
NEXT
0
Playback
Next All Files
Pause
Playback
Previous File
Playback
I▶▶
Next File
Screen Reset
After the file that you select, play next all files continuously. It
is same as [PLAY/PAUSE] button.
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Play a previous file before a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Play a next file after a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
If a frame of a video file is broken, green color runs on a
overall screen. Press number [o “Zero”] for screen reset.
26
2.5 Play DVD Files
DVD manager function support to play DVD Ripping File same as original DVD.
Make a folder and then save all ripping files into the folder. After connecting TV(or Monitor), select VIDEO_TS.IFO file
at the folder. Make sure that all the ripping files including VIDEO_TS.IFO from one DVD title will be located at one
folder.
9If you can not find VIDEO_TS.IFO file among all the ripping files from an original DVD title, DVD manager function will not
work.
Select ‘Video’ icon in Media Type Selection screen. Move to the folder including DVD ripping files and select
< Function and Button Descriptions>
‘video_ts.ifo’ file and press [ENTER] button.
Remote Control Function Description
AUDIO Select Audio Type Audio type will be changed whenever pressing this button.
SUBTITLE Select Subtitle Type Subtitle type will be changed whenever pressing this button.
Scr. SIZE Screen Size Screen size will be changed when press the button.
MENU Go to Menu Move to main menu while playing DVD.
SLOW Playback Slow
REPEAT
Chapter, Title
Repeat
Play slowly 1/2x, 1/4x, and 1/8x whenever pressing this
button.
Set chapter, title repeat.
27
A-B REPEAT A-B repeat Set the A-B repeat.
TITLE Go to Title Menu Move to title menu while playing DVD.
ANGLE Angle Apply angle function.
FILE INFO
TIME SEARCH
CANCEL
Brt. CONT
PREV
I◀◀
NEXT
I▶▶
FF
▶▶
REW
◀◀
ENTER Playback Play ‘Video_ts.ifo’ file.
PLAY / PAUSE
II▶
VOLUME + Volume Up Volume up.
VOLUME - Volume Down Volume down.
MUTE Sound Off
Show File
Information
Jump to Preferable
Playback Time
Delete Input
Numbers
Control luminosity,
color depth, brightness
Playback
Previous Chapter
Playback
Next Chapter
Fast Forward
Rewind
Pause
Show the file information which is being played. In order to
hide the information, press this button again.
Move to a selected time of a file.
In time search box, this button deletes all numbers in 0.
When pressing this button, 3 modes switch. After selecting
a mode, change settings with ◀▶ arrow buttons.
Play a previous chapter.
Play a next chapter.
Whenever pressing this button, play speed is changed with
8x, 16x, 32x, 48x in forward.
Whenever pressing this button, play speed is changed with
8x, 16x, 32x, 48x in backward.
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Mute the sound. In order to hear sound, press this button
again.
28
2.6 Play Music Files
It is possible to play music files like MP3, OGG, WAV, WMA.
Select Audio icon in Media Type Selection screen. Music file list will be displayed. Just move to a file and press
[ENTER] or [PLAY/PAUSE] button.
Select ‘Audio’ icon in Media Type Selection screen.
< Function and Button Descriptions>
Move to a file and press [ENTER] or [PLAY/PAUSE]
button.
Press [ENTER] for playing just the file or
[PLAY/PAUSE] for playing all files from the selected file.
Remote Control Function Description
FILE INFO
TIME SEARCH
CANCEL
Brt. CONT
PREV
I◀◀
Show File
Information
Jump to Preferable
Playback Time
Delete Input
Numbers
Control luminosity,
color depth, brightness
Playback
Previous File
Show the file information which is being played. In order to
hide the information, press this button again.
Move to a selected time of a file.
In time search box, this button deletes all numbers in 0.
When pressing this button, 3 modes switch. After selecting
a mode, change settings with ◀▶ arrow buttons.
Play a previous file before a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
29
Play a next file after a current playback file. If you used
NEXT
I▶▶
FF
▶▶
REW
◀◀
ENTER Playback a File
PLAY / PAUSE
II▶
PLAY / PAUSE
II▶
VOLUME + Volume Up Volume up.
VOLUME - Volume Down Volume down.
MUTE Sound Off
SUBTITLE Hide Mp3 Subtitle
9How to Play MP3 without TV set. MP3 Quick Play
Make a 'music' folder (in a small letter not a capital letter) at root directory of built-in HDD and save MP3 files at the folder. If the
HDD is divided into two or more partitions, make a 'music' folder at first partition.
Turn on Mpeg4 Player and just press [PLAY/PAUSE] button. MP3 files at 'music' folder will be played automatically. Additionally,
after rebooting Mpeg4 Player, the last played file will be continued to play.
9How to See MP3 Subtitle
It is possible to show MP3 subtitle which the MP3 file supports subtitle. MP3 subtitle supported file must be made by ‘iriver
caption editior’ program, not support LDB program.
Playback
Next File
Go to 10 Sec. in
Forward
Go to 10 Sec. in
Backward
Playback
Next All Files
Pause
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Go to 10 sec. in forward and play when a file is being played.
Go to 10 sec. in backward and play when a file is being
played.
Play a file. After finishing playback, return to file selections
screen.
After the file that you select, play next all files continuously. It
is same as [PLAY/PAUSE] button.
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Mute the sound. In order to hear sound, press this button
again.
It is possible to show mp3 subtitle which the mp3 file
supports subtitle. In that case, this button will hide the
subtitle.
* mp3 subtitle supported file must be made by iriver caption editior
program, not support LDB program.
30
2.7 Play Photo Files
It is possible to play photo files like JPG(JPEG).
Select Photo icon in Media Type Selection screen. Photo file list will be displayed. Just move to a file and press
[ENTER] or [PLAY/PAUSE] button.
Select Picture icon in Media Type Selection screen.
< Function and Button Descriptions>
Move to a file and press [ENTER] or [PLAY/PAUSE]
Press [ENTER] for playing just the file or
button.
[PLAY/PAUSE] for playing all files from the selected file.
Remote Control Function Description
FILE INFO
PREV
I◀◀
NEXT
I▶▶
ENTER Playback a File
Show File
Information
Playback
Previous File
Playback
Next File
Show the file information which is being played. In order to
hide the information, press this button again.
Play a previous file before a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Play a next file after a current playback file. If you used
[ENTER] for playback, you can not use this function. This is
available in playing all files as using [PLAY/PAUSE] button or
'Play All' icon.
Play a file. After finishing playback, return to file selections
screen.
31
PLAY / PAUSE
II▶
PLAY / PAUSE
II▶
FF
▶▶
REW
◀◀
Playback
Next All Files
Pause
After the file that you select, play next all files continuously. It
is same as [PLAY/PAUSE] button.
Pause playback, if pressing this button when a file is being
played. In order to play again, press this button again.
Zoom In Enlarge a photo.
Zoom Out Reduce a photo.
ANGLE Rotation Rotate a photo.
방향키
▲▼◀▶
Panning Move the position of photo.
ENTER Return to Original Photo Return to original photo.
Brt. CONT
Control luminosity,
color depth, brightness
When pressing this button, 3 modes switch. After selecting a
mode, change settings with ▲▼ arrow buttons.
9 Photo Slide Show
If you play all files with 'Play All' icon or [PLAY/PAUSE], photo slide shows will be started.
9 Music Slide Show
Make a 'music' folder (in a small letter not a capital letter at root directory) of built-in HDD and save MP3 files at the folder. If the
HDD is divided into two or more partitions, make a 'music' folder at first partition.
When you play one or all photo files, you can listen mp3 and see photo slide show together.
9Photo Preview On, Off
It is possible to enable or disable preview the photo file as a thumbnail image before playing at Other Setup screen.
32
2.8 Make a Play-List
User can register all media type of files like video, music, and photo to play-list. The registered media files to play-list
will be played without discriminating media type.
9It is not possible to play each registered files independently. Use 'Play All, Random Play' icon or [PLAY/PAUSE] button.
Additionally, registered play-list will be deleted after rebooting.
① Select Play List icon in Media Type Selection screen. ② Move to a file and press [ENTER] for adding to Play-
* In order to move up to Left Icon, press [◀] button.
* Delete All icon means to delete all the added files.
* In order to delete a added file, move to a file on Play-List screen and press [ENTER] twice.
* In order to change location among added files, move to a file which you want to move and press [ENTER] and then
move to the other file where you want to add and press [ENTER].
List. After adding, press
Move to 'Display' icon and press [ENTER].
③ Play-List screen appears. You can see just added
files. Play as followings,
- Play All icon: play in order from selected file.
- Random Play icon: play in random.
- Play/Pause button: play in order from selected file.
◀ for moving to Left Icon.
33
2.9 Remote Controls
This is guide for basic use of remote control. For more details, ‘2.3 Basic Screen Menu’, ‘2.4 Play Video Files’, ‘2.5 Play
DVD Files’, ‘2.6 Play Music Files’, ‘2.7 Play Photo Files’, ‘2.8 Make a Play-List’.
ENTER Play a File
▲▼◄► Arrow Key
FILE INFO Show File Info
TIME SEARCH Jump to Specific play time
Brt.CONT Set Luminosity, Color Depth, Brightness
MEDIA TYPE Go to Media Type Selection Screen
VIDEO Change Video Output Mode
AUDIO Change Audio Type of Video, DVD file
SUBTITLE S ubtitle Settings
Scr. SIZE Screen Size Settings
① Pull off the battery tray for remote controller’s body completely. ② Put the enclosed battery on the tray. ③ Insert the tray into
remote controller’s body completely.
POWER Turn On / Off SETUP Go to Setup Screen.
MENU Go to DVD Main Menu
TITLE Go to DVD Title Menu ANGLE DVD Angle, Photo Rotation
REPEAT Set DVD Chapter, Title Repeat A-B REPEAT Set DVD A-B Repeat
SLOW Play DVD Slowly
MAIN PAGE Go to Media Type Selection Screen.
PLAY/PAUSE Play next all files
Pause
STOP Stop Play
REW Play Faster in Backward
FF Play Faster in Forward.
PREV Go to Previous Page
Play Previous File in Play All
NEXT Go to Next Page
Play Next File in Play All
How to Insert/Change Battery
34
2.10 Others
2.10.1 Music Slide Show
Make a 'music' folder (in a small letter not a capital letter) at root directory of built-in HDD and save MP3 files at the
folder. If the HDD is divided into two or more partitions, make a 'music' folder at first partition.
When you play one or all photo files, you can listen mp3 and see photo slide show together.
2.10.2 MP3 Quick Play
This is for listening MP3 files without TV set.
Make a 'music' folder (in a small letter not a capital letter) at root directory of built-in HDD and save MP3 files at the
folder. If the HDD is divided into two or more partitions, make a 'music' folder at first partition.
Turn on Mpeg4 Player and just press [PLAY/PAUSE] button. MP3 files at 'music' folder will be played automatically.
Additionally, after rebooting Mpeg4 Player, the last played file will be continued to play.
2.10.3 Change Background Image
It is possible to change a background image on Mpeg4 Player. Save ‘mybg.jpg’ at root directory of built-in HDD.
Background image will be changed as ‘mybg.jpg’.
* Recommend to use 720x480 pixels image.
2.10.4 Change OSD Text Color
Press number 1 button before playing a file, OSD text color will be changed in dark or white. When you change
background image in dark or white, this function will allow to read the text easily.
2.10.5 Firmware Upgrade
Download a upgrade file from local distributor in your country or visit at www.airlinktek.com
After connecting TV set, move to the upgrade file and press [ENTER]. Upgrade is progressed automatically.
After finishing upgrade, you can check firmware version on Setup screen. Press [SETUP] button.
Technical Support
Contact your local distributor in your country or
AL Tech, Inc. in Korea
www.airlinktek.com, Tel 82-2-3011-9219, Fax 82-2-566-6186, E-mail sales@airlinktek.com
35
Loading...