Altech END PLATES, PARTITIONS, SEPARATOR Catalog Page

END PLATES PARTITIONS SEPARATOR

58

For all Rail Mounting Terminals Mounting Accessories

for CTSPC

END PLATES & ISOLATION
PARTITIONS

End Plates

End plates are used to cover the
open side of sectional DIN Rail
mount terminal blocks. They
should be used at the end of an
assembly of identical terminal
blocks or whenever there is a
change in the physical size of
the terminal block.

• Material: polyamide 6.6

• Standard color: gray

Isolation Partitions

Isolation partitions provide
separation between terminal
blocks with different potentials.
When used for DC power
applications, voltages of up to ±
600V DC can be used on either
side of the isolation partition.
They also provide visual
separation between groups of
blocks.

• Material: polyamide 6.6

• Standard color: gray

Separator Plates

Used for electrical separation of
adjacent jumpers. They can be
inserted after the terminal blocks
have been assembled on DIN
rail. There is no loss of width.

Terminal Block

CTS2.5UN/4UN/ CTT2.5UK/T/J
CTS6U/10U
CTS25U
CTS35U
CMT4/CM4S/CMT4SU
CDL4U/4UIS/4U(0)/ Electronic TB
ODL4U (front)
ODL4U (back)
CSFL4U/CSDL4U/CSFL4U(L)
DDFL4U/4U(E)/4U(E)LR/DDDL4U
CAFL4U/4U(L)/4U(N)
CTL2.5U/CTL2.5U(L)
CTL2.5UH/CTL2.5UH(L)
CDTTU/CDTTU-SH
CKT4U
CTC4U
CMC1-2
CMC2-2
CSC2.5T
CSC4T
CSC6T
CSC2.5T1-2
CSC2.5T2-2
CSC4T1-2
CSC4T2-2
CMB4

Cat. No. Std. Pk.

PP2.5/4UN 50
PP6/10U 50
PP25U 50
PP35U 50
PPCMT4 50

PPCSFL4U 50

PPCSC2.5T 50
PPCSC4T 50
PPCSC6T 50

Cat. No. Std. Pk.

SP2.5/4UN 100

SPCDL4U 100

SPCM4 100

Cat. No. Std. Pk.

EP2.5/ 4UN 50
EP6/10U 50
EP25U 50
EP35U 50
EPCMT4 50
EPCDL4U 50
EPODL4U 50
EP1ODL4U 50
EPCSFL4U 50
EPDDFL4U 25
EPCAFL4U 25
EPCTL2.5U 50
EPCTL2.5U-H 50
EPCDTTU 50
EPCKT4U 50
EPCTC4U 50
EPCMC1-2 50
EPCMC2-2 50
EPCSC2.5T 50
EPCSC4T 50
EPCSC6T 50
EPCSC2.5T1-2 50
EPCSC2.5T2-2 50
EPCSC4T1-2 50
EPCSC4T2-2 50
EPCMB4 50

CTSPC CSP1

Assmebled Block installed

with Protective Cover

PROTECTIVE COVER / SIDE HOLDING PLATES

For protection against dust and shock, transparent protective cover can be installed above the terminal block assembly with the aid of side/holding
plates. The side holding plates can be fitted on 35 mm and 32 mm Din rails. These plates should be backed by standard end stops.