Altech DIN35, DIN32, DIN13 Catalog Page

DIN Mounting Rails

18

18

18

Altech DIN Rails comply with DIN
50045, 50022 and 50035 Standards.
DIN Rails have been accepted
throughout the world, allowing the
designer to mount a wide variety of
control components, devices, termi­nal blocks, etc. on the same rail. The
use of DIN Rails enhances design
capabilities, saves space and reduces
labor.

Standard rails are made of steel with
zinc plating and chromate passivation
and are available in various configu­rations.

DIN Rails are available in 35mm (7.5
and 15mm deep), 32mm and 15mm
widths and are supplied in 1 m (3'3")
and 2 m (6’6”) lengths. Upon request
they can be cut to custom lengths and
punched with holes or perforations.

• 35mm, 32mm, 15mm

• Perforated or unperforated

• Rail material is steel with electrolyt­ic zinc plating

Type

Perforated
Steel

Unperforated
Steel

DIN35 DIN35

Cat. No. Length Std. Pk.

2511120 2m 20
2511120/1M 1m 40

2511110 2m 20
2511110/1M 1m 40

Type

Perforated
Steel

Unperforated
Steel

Cat. No. Length Std. Pk.

CA701-15/S-2M 2m 10
CA701-15/S 1m 20

CA701-15-2M 2m 10
CA701-15 1m 20

DIN32 DIN15

35 mm x

15 mm deep

Type

Perforated
Steel

Unperforated
Steel

Cat. No. Length Std. Pk.

2511160 2m 10
2511160/1M 1m 20

2511150 2m 10
2511150/1M 1m 20

Type

Perforated
Steel

Cat. No. Length Std. Pk.

CA601/S 1m 50

15 mm x

5.5 mm deep