Altech CTL2.5U-H, CTL2.5U Catalog Page
CUS
CUS
FEED-THROUGH
TRIPLE LEVEL
35 or 32mm DIN Rail
For applications with extreme
space constraints. Only 6mm
(.236”) wide, with three separate feed-through levels.
Jumpers can be used to
reduce field wiring.
CTL2.5U-H
CTL2.5U
They can also be used in control systems where sensors
and actuator applications are
involved.
The top level of CTL2.5UH terminal block provide connecting
points for signal while middle
and bottom level provide connecting points are used for
positive and negative potential.
In applications where switching indication is required,
choice of CTL2.5UHL and
CTL2.5UL terminal blocks with
built-in electronic components
are available.
Terminal Width
Height x Length
Stripping Length
Insulation Material
Type of Connection
Approvals
Wire Range
Voltage Rating
Current Rating
Torque
Terminal Block
End Plate
DIN Rail
for ordering information
refer to page 62
6 mm
67 x 61 mm
9 mm
Polyamide 6.6
4Screwclamps&3tappedholes for cross connection
E220514 E220514
22-12 AWG 0.5-2.5 sq.mm 22-12 AWG
300 V 500 V 300 V
25 A 24 A 25 A
4.5 lb-in 0.4 Nm 4.5 lb-in
Cat. No. Std. Pk.
CTL2.5U-H 50
EPCTL2.5U-H 50
6 mm
67 x 84 mm
9 mm
Polyamide 6.6
6Screwclamps&3tappedholes for cross connection
22-12 AWG 0.5-2.5 sq.mm 22-12 AWG
300 V 500 V 300 V
25 A 24 A 25 A
4.5 lb-in 0.4 Nm 4.5 lb-in
Cat. No. Std. Pk.
CTL2.5U 50
EPCTL2.5U 50
COLOR BLOCKS
(other than grey standard)
When ordering please add
color suffix to Cat. No.
Example: CTS2.5U-N/R
Color Ordering Suffix
Red R
Blue BU
Black BL
Orange O
Green G
Yellow Y
White W
Beige BG
Dark Brown DB
End Stop
for ordering information
refer to page 63
Internal
Jumper
Current
Bars
10 pole (breakable)
Shorting Sleeve & Screw
External
Jumper
Marking Tags (MT Type)
2 pole
3 pole
4 pole
10 pole
100 pole
2 pole
3 pole
4 pole
10 pole
100 pole
2 pole
3 pole
4 pole
10 pole
CA702 50
CA802 50
CA722/2 100
CA722/3 50
CA722/4 50
CA722/10 10
CA722/100 5
CA703/1 100
CA704/1 100
CA705/1 100
CA732/10 100
CA732/10-A 100
CA732/100 10
CA707/S/Q/01 100
CA715/2 100
CA715/3 100
CA715/4 100
CA715/10 50
MT2 100
CA702 50
CA802 50
CA722/2 100
CA722/3 50
CA722/4 50
CA722/10 10
CA722/100 5
CA703/1 100
CA704/1 100
CA705/1 100
CA732/10 100
CA732/10-A 100
CA732/100 10
CA707/S/Q/01 100
CA715/2 100
CA715/3 100
CA715/4 100
CA715/10 50
MT2 100
CTL2.5U-H(L)* CTL2.5U(L)*
CUS
CUS
6 mm
67 x 61 mm
9 mm
Polyamide 6.6
4Screwclamps&2tappedholes for cross connection
E220514 E220514
22-12 AWG 0.5-2.5 sq.mm 22-12 AWG
300 V 500 V 300 V
25 A 24 A 25 A
4.5 lb-in 0.4 Nm 4.5 lb-in
Cat. No. Std. Pk.
CTL2.5U-H(L)* 50
EPCTL2.5U-H 50
6 mm
67 x 84 mm
9 mm
Polyamide 6.6
6Screwclamps&2tappedholes for cross connection
22-12 AWG 0.5-2.5 sq.mm 22-12 AWG
300 V 500 V 300 V
25 A 24 A 25 A
4.5 lb-in 0.4 Nm 4.5 lb-in
Cat. No. Std. Pk.
CTL2.5U(L)* 50
EPCTL2.5U 50
Ideal for sensor applications.
See Altech’s Inductive Proximity Sensor cat-
alog for ordering information.
CA702 50
CA802 50
CA722/2 100
CA722/3 50
CA722/4 50
CA722/10 10
CA722/100 5
CA703/1 100
CA704/1 100
CA705/1 100
CA732/10 100
CA732/10-A 100
CA732/100 10
CA707/S/Q/01 100
CA715/2 100
CA715/3 100
CA715/4 100
CA715/10 50
MT2 100
CA702 50
CA802 50
CA722/2 100
CA722/3 50
CA722/4 50
CA722/10 10
CA722/100 5
CA703/1 100
CA704/1 100
CA705/1 100
CA732/10 100
CA732/10-A 100
CA732/100 10
CA707/S/Q/01 100
CA715/2 100
CA715/3 100
CA715/4 100
CA715/10 50
MT2 100
* Add required voltage to part number as suffix;
i.e. CTL2.5U(L)/24 for 24V DC
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908)806-9400 • FAX (908)806-9490 • www.altechcorp.com
Loading...