Altech CGT4U, CGT4N Catalog Page
GROUND
CUS
CUS
35 and 32mm DIN Rail
Use ground blocks instead of grounding studs and wire lugs to terminate
ground wires, saving installation and
wiring time.
Ground blocks clamp mechanically
onto the DIN Rail by tightening the
center mounting screw, making a reliable electrical connection between
the cage clamp terminals and the DIN
Rail.The rail serves as a busbar and
automatically distributes ground
potential to all other ground terminals
on the same rail.
Terminal Width
Height x Length
6 mm
48 x 43 mm
CGT4U
AEx eII EEx eII
CGT4N
6 mm
45.4 x 54.2 mm
Ground blocks can also be used
as end stops, preventing other terminal blocks and components from
moving laterally on the DIN Rail.
They are supplied with a standard
green/yellow housing for easy identification and accept standard marking
tags.
CGT4U, CGT10U and CGT35U can be
mounted on both DIN 32mm and DIN
35mm rails.
CGT4N & CGT6N can be mounted on
35mm DIN rail and have the same top
outer profile as the feed through
blocks (CTS4U-N, CTS2.5U-N, CTS6U,
CTS10U).
CGMT4 can be mounted on 15mm
DIN rails and has the same top outer
profile as the CMT4 feed through
blocks.
• High density
• Screw-cage clamp
• Special clamping foot
• Polyamide 6.6
• Color: green/yellow
Stripping Length
Insulation Material
Type of Connection
Approvals
Wire Range
Torque
Terminal Block
DIN Rail
for ordering information
refer to page 62
End Plate
Marking Tags
(MT Type)
9 mm
Polyamide 6.6
2 screw clamps
E220514 E220514
22-10 AWG 0.5-4 sq.mm 22-10 AWG
7 lb-in 0.5 Nm 7 lb-in
Cat. No. Std. Pk.
CGT4N 50
EPCGT4U 100
MT6 100
9 mm
Polyamide 6.6
2 screw clamps
22-10 AWG 0.5-4 sq.mm 22-10 AWG
7 lb-in 0.8 Nm 7 lb-in
Cat. No. Std. Pk.
CGT4N 50
EPCGT4U 100
MT6 100
Assembly for single phase
3 wire circuits.
CUS
CUS
CUS
CGT6N
CUS
CGT10U CGT35U
AEx eII EEx eII
CGMT4
8 mm
47 x 54.5 mm
12 mm
Polyamide 6.6
2 screw clamps
E220514 E220514 E220514 E220514
22-8 AWG 1.5-6 sq.mm 22-8 AWG
14 lb-in 0.8 Nm 14 lb-in
Cat. No. Std. Pk.
CGT6N 50
EPCGT4U 100
MT8 100
10 mm
49.5 x 45 mm
12 mm
Polyamide 6.6
2 screw clamps
22-6 AWG 1.5-10 sq.mm 16-8 AWG
14 lb-in 1.2 Nm 14 lb-in
Cat. No. Std. Pk.
CGT10N 50
EPCGT4U 100
MT10 100
16 mm
61.5 x 58 mm
18 mm
Polyamide 6.6
2 screw clamps
8-2 AWG 10-35 sq.mm 8-2 AWG
25 lb-in 2.5 Nm 25 lb-in
Cat. No. Std. Pk.
CGT35N 20
EPCGT4U 100
MT15 100
6 mm
28.5 x 27 mm
9 mm
Polyamide 6.6
2 screw clamps
22-10 AWG 0.5-4 sq.mm 22-10 AWG
7 lb-in 0.5 Nm 7 lb-in
Cat. No. Std. Pk.
CGMT4 50
EPCGT4U 100
MT2 100
Loading...