Page 1
Back
plate screw x 4
Fan Scr
ew
H120:
x4, H240:
x8, H360:
x12
R
adiator Scr
ew
H120:
x4, H240:
x8, H360:
x12
H240
Fan
Adapter
Cable
x 1
H360
Fan
Adapter
Cable
x 1
P
roduct
Specifica
tions
Water Block
Dimensions
62x55x44mm
Material
Copper/Engineering Plastic
P
ump
Rated Voltage
12V
Speed
2600R.P.M.±10%
B
ear
ing
Ceramic Bear
ing
R
adiator
Dimensions
H120:
120x157x27mm
H240:
120x275x27mm
H360:
120x393x27mm
Material
Aluminum
C
olor
Black
Fa
n
Dimensions
120x120x25mm
Voltage
DC
12V
C
urrent
0.15~ 0.3A
Fan
Speed
800~2000R.P.M.
Air Flow
18.3~ 45.2CFM
Static Pr
essure
0.53~ 1.8mm/H2O
Noise
Level
13.5~ 35.2dB(A)
Bearing Type
Hydraulic Bear
ing
C
onnectors
2510~4Pin
Lead Wire
Length
300mm
LED Rainbow 16 LEDs
Back
plate x 1 AMD gasket x 1
Intel bracket x 2 AMD bracket x 2
Thermal
grease
x 1
Spring nut x 4
Plastic
gasket x 8
Metal gascket x 4 Hexagonal nut x 4
Double-headed screw x 4
AIO
HQ: Jinhua Building, Dalang Street, Longhua District, Shenzhen,
86-0755-23600230 support@alseyecorp.com
©2009-2018
*All brand names and logos are trademarks of their respective companies and copyright belongs
ALSEYE CORPORATION LIMITED.
Liquid Cooler
H120 H240 H360
China.
All rights
www.alseyecorp.com
are
reserved.
to them.
User Manual
Specifica
Intel Socket L
AMD Socket F
Accessories
tions
GA775/115X/1366/2011/2066
M1/F
M2/AM2/AM2+/AM3/AM3+/AM4
Intel
H120
Installation
1. Fix
the
fan
2. Fix
onto the radiator;
the
radiator
R
adiator S
crew
H240
Installation Diagram
1. Fix
the
fan
2. Fix
onto the radiator;
the
radiator
with the
with
fan
Diagram
fans
onto the
onto the
case.
case.
Fan Screw
Fan Screw
R
adiator S
crew
1. Check
the Intel metal
2. Place
the
then
pass
the
3. Hexagonal
between the motherboard and
4.
Apply the thermal
5. Insert the Intel
6. Tear
off the protective
CPU surface
bracket). Make
Platform
Installation
back
back
plate
screw
back
plate
screw
nut onto the
paste
bracket
to the
sticker
and
screw
with spring nut (put a metal
the copper bottom
plate and the motherboard
to the
back
plate with
through the motherboard to its
back
plate
screw
every hexagonal
on the
CPU
surface.
side
of water block with “Intel”
from the copper
close
to the
a plastic gasket
from the
nut.
base
gasket
CPU surface
socket.
between it and the mother
obverse side.
obverse side
Indicating Position
of the cold plate and install the cold plate on the
of the mother
upw
ards.
between
every
and lock the spring nut tightly and
board. Plastic
spring nut and the Intel
board,
gasket
flat.
H360
Installation
Refer
to H240.
Metal gasket
INTEL bracket
Hexagonal
Plastic
M
other
Back
Plastic
Back
plate
Spring
gasket
boar
plate
gasket
screw
nut
CPU
nut
Intel
Platform
1. Twist
the
belo
w).
2.
Apply the
3. Tear
off the
plate on the
nut
and
the Intel
spring
nut tightly
d
Intel/AMD
1. Select the
"TOP"
upw
2. The bracket can
LGA 2011/2066
double-headed screw
thermal paste
protective sticker
CPU surface and screw
bracket). Make
Bracket
corresponding bracket
ards.
Installation
and flat.
be
pushed
on the
Installation
is as
into the
to
every hole
surface
from the
with
the
copper
to the
below.
card
Installation
on the
of
CPU.
copper base
spring
nut (put a metal
bottom
Double-headed
motherboard
slot directly.
motherboard
of the cold plate
gasket between every
close
to the
CPU surface and lock
Spring
nut
Metal
gasket
screw
CPU
Motherboard
type
(Intel/AMD)
No screws are
by
short threaded end
and install
with
the cold
needed.
spring
the
(as
AMD Platform
1. Select the
(F
M1/F
M2/AM2/AM2+/AM3/AM3+/A
2. Place
the
mother
board,
3. Hexagonal
Installation
AMD
metal
back
plate
then
pass
nut onto the
screw
between every hexagonal
4.
Apply the
5. I
nsert the
6. Tear
plate on the
nut
spring
thermal paste
AMD bracket
off the
protective sticker
CPU surface and screw
and
the Intel
nut tightly
bracket). Make
and flat.
back
the
back
nut
on the
to the
to the
back
plate to the
M4).
back
plate
screw
plate
screw
and
the mother
CPU
surface.
side
of
water block
from the
with
the
copper
motherboard
plate with
a plastic gasket between
through the
F
ool-proofing por
from the mother
board.
copper base
spring
nut (put a metal
bottom
socket
motherboard
t
boar
with “A
MD” upw
of the cold plate
close
to the
CPU surface and lock
Spring
nut
Metal Gasket
AMD bracket
Hexagonal
Back
Plastic
gasket
Plastic
Back
AMD gasket
plate
nut
CPU
gasket
plate
screw
it
and
the
obverse side.
Plastic
d’s
front
to its
side.
ards.
and install
the cold
gasket between every
gasket
spring
the
Cable Connec
1. H120:
connect
2. H240/360:
the
connect
CPU_FAN
tion
fan
the
to “CPU_F
fans
to “CPU_F
AN” on the mother
AN” on the
board.
motherboard via
the
adapter cable.
For
H240
CPU_FAN
For
H360
SYS_F
AN-(3PIN)
3-pin connector
of pump
Loading...