y
ope
User's Manual
y
y
Product name : TRANSMITTER ASSY KEYLESS
This unit is installed in vehicle. It performs communication with keyless unit
by LF, processes RF signal from keyless unit, and performs actions according
to the signal.
Immobilizer Function
Unit Assy Immobi&Keyless communicates with the transponder in the
hand unit when the user inserts the hand unit in the key cylinder, and it
rotates
Type : TWB1U859
HUND UNIT
less Function
Ke
When the user pushes LOCK, UNLOCK, and the TRUNK button of
HAND UNIT, the RF electric wave is output, and IMMOBI UNIT receives
it, and an open lock, the close lock of the door, and the signal of the trunk
ning are output.
Operation Voltage
Batter
Operating temperature
range
Weight
Operation of frequency
-40~＋85 degree C Immobilizer
UNIT ASSY IMMOBI&KEYLESS
LOCK Button
UNLOCK Button
Trunk Button
typ. 3.0V / max 3.3V
Lithium battery CR2032
-20~＋60 degree C Keyless
0.056kg
RF : 313.85MHz
LF: 125kHz
■CAUTION■
Pay attention to the following.
・It may not be operated when using the equipment of the same
frequency band in the vicinity.
Please DO NOT the following. Engine is not started by failure of
electronic parts. (Product can not receive the signal correctly)
・Give a shock.
・Get it wet. If it got wet, wipe and dry up.
・Disassembly and modification.
This device complies with Part 15 of FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may
cause undesired operation of this device.
FCC WARNING
Changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the
Loading...