g
y
g
User's Manual
y
y
g
g
Produc t name : TRANSMITTER ASSY KEYLESS
This unit is installed in vehicle. It performs communication with keyless unit by
LF, processes RF signal from keyless unit, and performs actions according to
the sign al.
Immobilizer Function
Unit Assy Immobi&Keyless communicates with the transponder in the
hand unit when the user inserts the hand unit in the key cylinder, and it
rotates
Type : TWB1G721
HUND UNIT
Keyless Function
When the user pushes LOCK, UNLOCK, and the TRUNK button of HAND
UNIT, the RF electric wave is output, and IMMOBI UNIT receives it, and an
open lock, the close lock of the door, and the signal of the trunk opening
Operation Voltage
Batter
Operating temperature
range
ht
Wei
Operation of frequency
-40~＋85 degree C Immobilizer
UNIT ASSY IMMOBI&KEYLESS
LOCK Button
UNLOCK Button
Trunk Button
typ. 3.0V / max 3.3V
Lithium batter
-20~＋60 degree C Keyless
RF : 433.92MHz
CR2032
0.056k
LF: 125kHz
■CAUTION■
Pay attention to the following.
Please DO NOT the following. Engine is not started by failure of
electronic parts. (Product can not receive the signal correctly)
not be operated when using the equipment of the same
・It ma
frequency band in the vicinity.
・Give a shock.
・Get it wet. If it
・Disassembly and modification.
ot wet, wipe and dry up.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of
this device.
FCC WARNING
Chan
es or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Loading...