ALPS ALPINE WB1G0084 user manual

User's Manual
e
are output
e
Type : TWB1G0084
Keyless Function
When the user pushes LOCK, UNLOCK, and the PANIC button of HAND UNIT, the RF electric wave is output, and TUNER receives it, and an open lock, the close lock of the door, and the signal of the trunk opening
.
LOCK Button UNLOCK Button
Operation Voltage DC 3.0V
Battery
Operating temperatur
range
Weight
Operation of frequency 433.92MHz
How to confirm the certification marking
Lithium battery CR1620
-20~60 degree C Keyless
7.8g
The label is attached inside of the cover which is readily removed,
thus FCC ID and CE marking can be easily recognized by users.
CAUTION
Pay attention to the following.
It may not be operated when using the equipment of the sam frequency band in the vicinity.
Please DO NOT the following. Engine is not started by failure of electronic parts. (Product can not receive the signal correctly)
Give a shock.Get it wet. If it got wet, wipe and dry upDisassembly and modification.
-CAUTION - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
-CAUTION - Do not exposed to excessive heat such as sunshine, fire or the like.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Loading...