Page 1
User's Manual
Product name : Switch Assy Immobilizer Antenna
Since this device is always used with vehicle, it is not sold to general end users separately.Therefore there is no user manual of
this device by alone.
It communicates with IC used both as Transponder and Passive RKE through LF ANT(Z axis) of I-key H/U, and operates as ANT
to exchange communication data depending on community signal with BCM.
The immobilizer antenna communicates with the transponder in the hand unit when the hand unit is brought close, and receives the
code of the key. The immobilizer is used by bringing the hand unit close as shown in figure.
Type : P74P0
The connector is arranged as shown in the figure below.
HUND UNIT Switch Assy Immobilizer Antenna
CONNECTORPINLAYOUT
AC/DC Supply
Range of voltage
Consumption current
Size
Operating voltage
Operating temperature range
Consumption current spec
Weight
Operation of frequency
The following statements must be described on the user manual of the vehicle;
Under 0.7mA（Standby current）
MAX 150mA(@12.5V 25℃) at operation
MAX 0.7mA(@12.5V 25℃) at standby
■CAUTION■
Pay attention to the following.
(The operation range might be changed by the environment. )
・Do not contact and bring metals close to the engine SW and the key.
・It may not be operated when using the equipment of the same frequency band in the vicinity.
DC12V
DC6V～16V
W45.0xL57.7xH45.0（mm）
DC6～16V
-40~＋85 degree C
0.043kg
125kHz
Please DO NOT the following. Engine is not started by failure of electronic parts. (Product can not receive the signal correctly)
・Give a shock.
・Get it wet. If it got wet, wipe and dry up.
・Disassembly and modification.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not
interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this
device.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority t
operate the equipment.
o
cause
Loading...