Page 1
TYPE-E SUBWOOFER
HAUT-PARLEUR D*EXTREMES GRAVES TYPE-E
APPLICATION GUIDE
GUIDE D' APPLICATION
SWE-1242
12 Inch Single Voice Coil Subwoofer (40)
Haut-parleur d'extrêmes graves à single bobine 12 po (40)
SWE-1042
10 Inch Single Voice Coil Subwoofer (40)
Haut-parleur d'extrêmes graves à single bobine 10 po (40)
Page 2
>^^^LPINE
SINGLE4Ü TYPE-E APPUCATION DIAGRAMS
SCHÉMAS D'APPUCATION
-
TYPE-E, SINGLE BOBINE, 4 Û
1
1
One Amplifier end One Subwoofer
1
emplificeteur et ^ h.-p. d'extrêmee grevee
©
4Q
Example S
Exemple S
Two Amplifiere end Two Subwoofere
S empUflceteurB et S h.-p. d'extrêmee grevee
3
3
One Amplifier end Two Subwoofere
^ emplificeteur et 8 h.-p. d'extrêmee
0
20
4
4
®
One Amplifier end Four Subwoofere
emplificeteur et A h.-p. d'extrêmee s
0
©
40
TYPE-E WIRING WORKSHEET
CÂBLAGE POUR TYPE-E
Page 3
SPECIFICATIONS
Model
Size
Impedance
Power Handling (RMS/Peak)
Frequency Response Fs~1kHz Fs-lkHz
Sensitivity* 89dB 87dB
S WE-1242
12"
4Q 4Q
250W/750W
S WE-1042
10"
250W/750W
DC Coil Resistance (Re)
Inductance (Le) 1kHz/20kHz 2.78mH/0.86mH 2.70mH/0.85mH
Free Air Resonance (Fs) 31 Hz 33Hz
Equivalent Stiffness (Vas)
Qms/Qes/Qts 9.68/0.70/0.66 9.85/0.71/0.66
X max / X peak 11.7mm/23.4mm 11.7mm/23.4mm
3.6 Q
61L
3.6 Q
33L
Mechanical Excursion (P-P)
Gap/Coil Height (Hag/Hvc) 10mm/33.4mm 10mm/33.4mm
Cone Area (Sd) 490.87 cm^ 339.79 cm^
Kevlar Reinforced
Diaphragm Material
Spider Material
Magnet Weight 64oz 44.80Z
40mm
Pulp
Nomex
36mm
Kevlar Reinforced
Pulp
Nomex
Voice Coil Diameter 38mm 38mm
Displacement (front mount)**
Displacement (rear mount) 0.092 ft^3 0.079 ft^'S
Added Volume (reverse mount)**
Recommended Sealed Box Volume
0.086 ft'^S
0.084 ft'^S
0.8-1.7 ft'^S
0.061 ft'^3
0.056 ft'^S
0.6-1.25 ft'^S
Note: All specifications are subject to change without notice
# All T/S parameters measured/calculated, after break-in.
* This commonly misunderstood specification should not be used as a reference for subwoofer output capability.
** Based upon 3/4" (19mm) baffle thickness, with opening cut approximately to gasket inner diameter
SPECIFICATIONS
Modèle
Dimensions 12" 10"
Impedance
SWE-1242
4Q 4Q
SWE-1042
Puissance (RMS/MAX)
Réponse en fréquence Fs-lkHz Fs-lkHz
Sensibilité 89dB 87dB
Résistance en continu (Re)
Inductance (Le) 1kHz/20kHz 2.78mH/0.86mH 2.70mH/0.85mH
Fréquence de résonnance (Fs) 31 Hz 33Hz
250W/750W
3.6 Q
250W/750W
3.6 Q
Raideur equivalente (Vas)
Qms/Qes/Qts 9.68/0.70/0.66 9.85/0.71/0.66
X max / X crête 11.7mm/23.4mm 11.7mm/23.4mm
Excursion mécanique (P-P) 40mm 36mm
Largeur Entrefer/Bobine (Hag/Hvc) 10mm/33.4mm 10mm/33.4mm
Surface de cône (Sd) 490.87 cm^
61L
33L
339.79 cm^
Membrane
Suspension Nomex Nomex
Poids de l'aimant 64oz 44.80Z
Diamètre de bobine
Displacement (en avant) 0.086 ft'^S 0.061 ft'^S
Displacement (en arrière)
Kevlar renforcé
38mm
0.092 ft'^S
Kevlar renforcé
38mm
0.079 ft'^S
Volume en plus (en renvèrse)
Volume de charge recommandé 0.8-1.7 ft^'S 0.6-1.25 ft''3
0.084 ft'^S
0.056 ft'^S
Page 4
0 298 [11-23/32']
0 268.8 [10-19/32"]
0 249 [9-13/16"]
0 231.4 [9-1/8"]
ALPINE ELECTRONICS,INC.
Tokyo office: 1-1-8 Nishi Gotanda,
Shinagawa-ku, Tokyo 141, Japan
Tel: (03) 3494-1101
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
6-8 Fiveways Boulevarde Keysborough,
Victoria 3173, Australia
Tel: 61 (3) 9769-0000
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón 32, 01013
®
ALPINE ELECTRONICS OF U.K., LTD.
13 Tanners Drive, Blakelands, Milton Keynes,
Mk14 5BU, U.L.
Tel: 44 (1908) 611556
ALPINE ELECTRONICS FRANCE S.A.R.L.
98,Rue de la Bella Etoile, Z.l. Paris Nord II
California 90501, U.S.A.
Tel: (310) 326-8000
ALPINE ELECTRONICS OF CANADA, INC.
Suite 203, 7300 Warden Ave. Markham,
Ontario L3R 9Z6, Canada
Tel: (905) 475-7280
Vitoria (Alava). Apdo: 133,Spain
Tel: 34 (945) 283588
ALPINE ILICTRONICS GmbH
Frankfurter Ring 117, 80807 Mönchen
Germany
Tel:089-32 42 640
ALPINE ELECTRONICS MANUFACTURING OF EUROPE
B.P. 50016, 95945, Roissy, C.D.G. Cedex,
France
Tel: 33 (1) 4863-8989
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano Sul
Naviglio, Italy
Tel: 39 (02) 484781
H-2051 Biatorbagy, orfzag ut. 2, Hungary
Tel: 36 (23)311-923
Printed in China
Loading...