ALPHATECH TECHNOLOGIES s.r.o.
Jeremenkova 88, Praha 4, Czech Republic
www.alphatechtechnologies.cz
Door Phone VoIP
IPDPS – 01C
IPDPS – 02C
IPDPS – 01
IPDPS – 02
User manual
Welcome
We congratulate you on purchase of “DoorPhoneSlim VoIP” (VoIP = Voice
over IP), which is the improved version of successful “New DoorPhone”
(NUDV). This DoorPhone VoIP will widely manage to satisfy your needs of
communication with persons at the building front door or your company entry,
or family house doorway. The universality lies in possibility to connect this
guard to an Ethernet network or VoIP exchange or directly to SIP server
through internet conection.
The basic DoorPhone VoIP module IPDPS-01 is supplied with 1 button,
IPDPS-02 is supplied with 2 buttons The next version of basic VoIP modules
(IPDPS-01C and IPDPS-02C) is with integrated colour camera.
The Doorphone is supplied from AC/DC powersupply 12V. The basic features
include the possibility to open up to two doors by means of connected electrical
locks (the buttons can be used for door code opening) and easier programming
by WEB sites from PC by network connection.
IPDP - installation and operating instructions
3
Table of Contents
DOORPHONE VOIP ................................................................................................... 1
1 BASIC DESCRIPTION ....................................................................................... 4
1.1 FEATURES ...................................................................................................... 4
1.2 MODULE ASSEMBLY ...................................................................................... 5
1.3 MODULE FEATURES ....................................................................................... 5
1.3.1 IPDPS Basic Module ............................................................................... 5
1.3.2 Connect to Network – Ethernet ................................................................. 8
1.4 INSTALLATION OF DOORPHONE VOIP ASSEMBLY ......................................... 9
1.4.1 Open and close the cover of IPDPS ......................................................... 9
1.4.2 Dismounting lighting of nameplate ........................................................... 9
1.4.3 Assembly IPDPS on the wall ................................................................... 10
1.4.4 Return lighting name plate after mounting on the wall. ......................... 10
1.4.5 Change of nameplates ............................................................................. 11
1.5 FOCUS CAMERA AND DESCRIPTION OF FRONT PANEL ................................... 12
2 DOORPHONE VOIP OPERATION ............................................................... 13
2.1 SIGNALING OVERVIEW ................................................................................. 13
2.2 VISITOR AT DOOR ........................................................................................ 13
2.3 PERSON INSIDE OBJECT ............................................................................... 14
2.3.1 Outgoing Call ......................................................................................... 14
2.3.2 Incoming Call ......................................................................................... 14
3 PROGRAMMING OF PARAMETERS .......................................................... 15
3.1 BASIC VOIP SETTINGS ................................................................................. 15
3.1.1 Choosing a mode and login .................................................................... 15
3.1.2 Language option ..................................................................................... 16
3.1.3 Network settings ...................................................................................... 16
3.1.4 Peer to peer or SIP server connection .................................................... 18
3.1.5 Audio codec setting ................................................................................. 18
3.1.6 Setting video ............................................................................................ 19
3.1.7 Service settings ....................................................................................... 20
3.2 SETTING DOORPHONE PARAMETERS ............................................................ 21
3.2.1 Basic Parameters .................................................................................... 21
3.2.2 All about relays ....................................................................................... 22
3.2.3 Time Parameters ..................................................................................... 24
3.2.4 Direct Dialing – Memories ..................................................................... 25
4 TECHNICAL PARAMETERS......................................................................... 26
4.1 ELECTRICAL PARAMETERS .......................................................................... 26
4.2 MECHANICAL DIMENSIONS .......................................................................... 26
IPDP - installation and operating instructions
4
1 Basic Description
1.1 Features
Voice communication is supplied only from telephone line
Two 16digit numbers (IP adress) with each button
Day/night switching
Possibility of the call extension by * or # choice
Possible to connect two independent locks for door opening
Possible use of 5 switch modes (e.g. camera, lighting, gradual
opening)
Two codes for hanging up the guard from telephone
Two codes for door opening from telephone
Six code locks (password from buttons at the door)
Integrated heating of printed circuit
Permanent lighting through visiting cards
Included color camera
Ethernet – 10/100Mb with standard 10BaseT a 100BaseTx
Web server for remote configuration – BOA
Software for Internet telephony (VoIP) – Linphone
Operating system – Linux 2.6
USB for connection camera – USB guest 1.1, software GSPCA
software for video transmission to the browsers in PC – W3CAM(JPEG, RTSP Streem)
SIP connection P2P or PBX network system
WEB – firmware upgradeable
WEB – interface for control and setup parameters
IPDP - installation and operating instructions
5
1.2 Module Assembly
The IPDPS are the basic modules with color camera IPDPS-01/02C or without
camera IPDPS-01/02.
IPDPS-01 IPDPS-02 IPDPS-01C IPDPS-02C
1.3 Module Features
1.3.1 IPDPS Basic Module
The IPDPS basic module assembling from modulus IP and
motherboard. Positioning setting elements and connectors is on picture 1.
For IPDPS is necessary used the AC voltage of min. 10Vst - max.
15Vst or DC voltage of min. 12Vss to max. 18Vss must be energized to “12V”
terminal. This source loading depends on number of modules, since it
simultaneously serves feeding of lighting through visiting cards – at max.
number of connected modules the demand will not exceed 300mA. This source
can be also used for feeding of lock(s), and then it is necessary to consider the
electrical lock demand. In practice the alternating feeder 12V/1A mostly meets
these demands.
IPDP - installation and operating instructions
6
Picture 1 Basic module - motherboard
The connection of relay contact terminals is shown on fig. 1. The “NO”
designation means an idle-disconnected contact, “COM” means a pin contact
(middle) and “NC” means an idle-connected contact. The contacts of both
switches are galvanically isolated each other and from other guard circuits. The
variants of connection are shown on picture. 2.
IPDP - installation and operating instructions
7
Picture 2 Examples of relays connections
Setting voice communication –
position trimmers are presetting from
manufacture and in majority case
agree with, therefore changes setting
altering only in necessary case. Basic
position of trimmers, sense of rotation
and meaning trimmers are illustration
on picture 3.
Picture 3 Setting of trimmers
IPDP - installation and operating instructions
8
DIP switch setting basic operation and default
setting. See on picture 4.
Picture 4 DIP switch settings
1.3.2 Connect to Network – Ethernet
IPDP - installation and operating instructions
9
1.4 Installation of DoorPhone VoIP Assembly
1.4.1 Open and close the cover of IPDPS
1.4.2 Dismounting lighting of nameplate
IPDP - installation and operating instructions
10
1.4.3 Assembly IPDPS on the wall
The installation is made by screwing to the wall by means of dowels.
1.4.4 Return lighting name plate after mounting on the wall.
IPDP - installation and operating instructions
11
1.4.5 Change of nameplates
Each button has its separate nameplate hold by means of plastic flag
(see figure). The paper nameplates can be printed from Excel form (to be
downloaded on www.alphatechtechnologies.cz).
IPDP - installation and operating instructions
12
1.5 Focus camera and description of front panel
If is need focus picture from camera, so everything is illustration on picture
basic module on Picture 5 .
Picture 5 camera in IPDPS
1. VoIP module
2. connect microphone
3. connect speaker
4. camera
5. turning with objective of camera is focus picture
IPDP - installation and operating instructions
13
2 DoorPhone VoIP Operation
2.1 Signaling Overview
The all-purpose guard signals an acoustic conditions they may occur during
operation. Another signaling can be done by means of red LED (placed under
microphone hole). You can listen the signaling samples in Nset setting
program.
Condition
Tones
Tone frequency
Line lifting up
–▄–■–▀–
425-850-1275
Line hanging up
–▀–■–▄
1275-850-425
Report after calling
–▄–■–▀–
425-850-1275
Notice about call end
–■–■–■–
1275
Parameter confirmation
––█––
Switch on (Reset)
–■–▄–■–
1275-850-1275
Error (anything, if unsuitable)
–■–■–■–■–■–■–
425….
Empty memory (no progr. numb.)
–█–▄–■–▄–■–▄–
850-1275-1700…
2.2 Visitor at Door
The all-purpose guard function is influenced partly by used guard assembly
(with keyboard or without it) and partly by setting of guard parameters.
The DoorPhone buttons are provided by nameplates or positions of persons
inside the object. The incoming person will press the corresponding button, the
DoorPhone will lift up the VoIP canale neither immediately (the button is not the
first number from code lock), or with delay and dial the programmed phone
number thru VoIP, but dial number differs by choice mode, which is set in the
DoorPhone :
- Day/night mode = being the DoorPhone in Day mode, so it is always
dialing a number set in table 1, in Night mode, it is always dialing a
number set in table 2.
- mode two number group = first press – it always dials a number set
in table 1. By repeated press of the same button or detection of busy
tone after dialing the DoorPhone will select the number from the
second group (table 2). The next press of the same button again
selects a number of the first group, etc..……
The switch (code lock) can be controlled by first 10 buttons of DoorPhone. If
the visitor at door presses buttons in such combination that meet the
preprogrammed code and the time among presses is not bigger than the set
point, then the DoorPhone will pick up and close the corresponding switch (if
IPDP - installation and operating instructions
14
set in m=1 or m=5 modes) to the period given by seting in parameters. Then it
will hang up.
2.3 Person Inside Object
The person inside object is considered a person that is in phone contact with
DoorPhone.
2.3.1 Outgoing Call
The outgoing call is the call from DoorPhone (caused by visitor). After guard
choice the telephone is ringing inside object and the pickuping up will allow
speaking to the visitor at door. The code choice can close the switch, if set to
m=1 or m=5 modes, change over the Day/Night modes and hang up the
DoorPhone. The DoorPhone in 10 seconds before call end will send a notice
about call end and the call may be extended by sign selection (* or #). The
telephone hanging up will end the call.
2.3.2 Incoming Call
The incoming call is the call to the DoorPhone (caused by person inside
object). After exchange number selection, where the DoorPhone is connected,
the DoorPhone is ringing and when set number of rings is over, the DoorPhone
will pick up and it is possible to speak. The possibilities are the same as with
outgoing call.
IPDP - installation and operating instructions
15
3 Programming of Parameters
3.1 Basic VoIP settings
3.1.1 Choosing a mode and login
It is important to choose a DoorPhone mode first. The
DoorPhone can work in the PeerToPeer mode or SIP
server mode. The mode setting can be made by a
relevant switch (DIP switch see on picture 8). In the SIP
server mode is possible to choose SIP server (external).
It can be set in a configuration interface of the
DoorPhone.
Picture 6 DIP switch setting
In your web browser enter IP address of the DoorPhone, default is
192.168.1.250. See Picture 7. Enter user name and password. User name is
„admin“, default password is „1234“. See Picture 7.
Picture 7 First site - video from camera
Picture 8 Login to setup
IPDP - installation and operating instructions
16
3.1.2 Language option
Language setting can be made in a menu on the left panel.
3.1.3 Network settings
Network settings are located in the Network seting menu item. It is possible to
use DHCP service (1) or you can enter IP addresses manually.
Manual configuration:
After making changes click on a save and restart button.
1 – Enable/disable ethernet settings via DHCP
2 – Default value – presetings to the firm settings. After making changes click
on a save and restart button (display screen - see page 20).
IPDP - installation and operating instructions
17
DHCP configuration:
After making changes click on a save and restart button.
1 – Enable/disable ethernet settings via DHCP
2 – show automatic DHCP generate IP adress and othet settings
3 – Default value – presetings to the firm settings. After making changes click
on a save and restart button (display screen - see page 20).
4 – Show mode of DoorPhone – Day/Night
5 – Return to the video from color camera screen
Important: if you use setup via DHCP, then it‘s assigning IP address to
DoorPhone automatically and network administrator must tell you actual
address, to was possibility display video in web browser. Because assigning IP
adress can change after e.g . failure power supply in object, so they
recommended enjoy DoorPhone with fixed IP address.
IPDP - installation and operating instructions
18
3.1.4 Peer to peer or SIP server connection
The DoorPhone can be set to the peer to peer (P2P) mode or to the SIP server
mode by DIP switch (page 15). In P2P mode DoorPhone calling IP adress – in
memory buttons (page 25).
If you setting SIP server mode by DIP switch, so add in menu item SIP
parameters
After making changes use the save changes button.
1 – SIP proxy server IP adress or the SIP server name and port (usually 5060
or 5061)
2 – Registering data to SIP proxy server
3 – Default value – presetings to the firm settings. After making changes use
the save changes button.
3.1.5 Audio codec setting
After making changes use the save changes button.
1 – There is choosing only priority using audio codecs, used codec is selection
automatically at make audio connection in SIP protocol.
2 – Default value – presetings to the firm settings. After making changes use
the save changes button.
IPDP - installation and operating instructions
19
3.1.6 Setting video
After making changes use the save changes button.
1 – Resolution display video
2 – Number picture per second (frequency restoring picture)
3 – Setting next parameters of camera
4 – Default value – presetings to the firm settings. After making changes use
the save changes button.
IPDP - installation and operating instructions
20
3.1.7 Service settings
1 – display current version of firmware in module VoIP and in module
doorphone, button switching if is has save history events in basic or
enhanced mode - it is important to analyses mistakes and problems. This
file it is possible save to PC by click on download log file.
2 – tool for upgrade firmware in module VoIP and in module doorphone,
switching automatic - information is in upload fille.
3 – Addition / change language file - upload fille with language assignment
4 – change access password, default is 1234
5 – reboot VoIP module.
IPDP - installation and operating instructions
21
3.2 Setting DoorPhone parameters
3.2.1 Basic Parameters
After making changes use the save changes button.
1 – Mode of DoorPhone choice selects number per Day/Night DoorPhone
mode or selects numbers of the first and second groups.
2 – Sign for call extension * or # (10sec before call end the DoorPhone will send
a notice, then the call may be extended)
3 – Two commands in order to hang up the DoorPhone using both switches
[2 digits].The advantage is to set the same command both for switch closing
and command to guard hanging up (page 22).
4 – Command for DAY / NIGHT mode switching
Note: The switchover to Day/Night mode remains set in guard even after
power supply disconnection.
5 – Dialing as on normal telephone (all number of called person should be
pressed on keyboard) - recommended for use SIP proxy server.
Only 2-digit memory number is entered on keyboard by which the number of
called person is stored (memory number corresponds to button number with
respect to Day/Night switchover) - recommended for use P2P-NOT include
6 – =0 only NC-mode connected to the basic module
=1 the keyboard connected on the first position (after IPNCx-mod)
=2 the keyboard connected on the second position (after first NC-mod4)
=3 the keyboard connected on the third position (after second NC-mod4)
explanation of position keyboard is on chapter 0 (page 8)-NOT include
7 – Default value – presetings to the firm settings. After making changes use
the save changes button.
ATTENTION! This parameters setting will sharply influence whole DoorPhone
function.
IPDP - installation and operating instructions
22
3.2.2 All about relays
After making changes use the save changes button.
1 – Relay mode:
=1 switch mode – it will close on command or password for period t1/2
(used for electrical locks, gate opening etc.)
=2 camera mode – it will close by guard pick up and open by hanging up.
=3 lighting mode – it will close by guard pick up and stay closed even for
period t1/2 after guard hanging up.
=4 bell mode – it will close after button pressing and open after period t1/2
(used for e.g. external bell or horn connections).
=5 gradual opening mode – in this mode the only relay 2 will be set
together with relay 1 set to mode 1. The relay 1 is activated for period t1,
then the time t3 is proceeding before relay 2 closing. Then the relay 2 is
activated for t2 period and afterwards the DoorPhone hangs up.
Note: The only relay 1 can be activated from phone and all sequence started.
Besides that the relay 2 can be separately activated from buttons by password.
IPDP - installation and operating instructions
23
2 – password for relay closing from buttons or keyboard [2 to 6 digits]. Total 6
passwords, they are controlled by Day/Night; the combination is entered
either by DoorPhone buttons (first 1/2 buttons) or from attached keyboard
(after pressing of key symbol). The relay closing influences the set switch
mode and Day/Night switchover. By setting of choice mode of 2 number
groups the DoorPhone is permanently in DAY mode.
By password choice some rules have to be observed:
Select passwords in way not to find its combination out from
wear of certain buttons by frequent use.
Select the first password button from frequentless button for
direct dialing (-extends choice time)(-not valid for keyboard).
Pay attention to congruity of password numbers when one
password includes other one, e.g. relay 1 has 1234 and relay 2
has 12345. Then after pressing button 4 the only relay 1 is
called, but password choice 234 for relay 2 can call both relays
after pressing switch 4.
3 – Command from phone after relay closing [2 digits]. The same command can
be set for both relays, then they are activated at the same time. The
advantage is to set the same command both for relay closing and command
to DoorPhone hanging up (page 21).
4 – Duration of relay closing in second [2 digits 01-99]
5 – To prohibit the control during incoming call is important e.g. when using
relay 2 in mode 1 for control of garage gate opening, when the electronics
opens the gate and the gate is closed by car passage. Then the control from
phone could undesirably cause the permanent gate opening (not closed –
no car passage).
6 – time in second between close relays 1 and 2 by mode setting of relay 2 is 5
(gradual opening) [2 digits 01-99]
7 – Default value – presetings to the firm settings. After making changes use
the save changes button.
IPDP - installation and operating instructions
24
3.2.3 Time Parameters
After making changes use the save changes button.
1 – max. time, for which the DoorPhone is hanging up, this time can be
extended during call by sign choice from telephone (* or #) – see page 21.
2 – Number of incoming call rings, the DoorPhone pick up after preseted
number of rings. After detection first ring – LED on front panel blinking. The
number can be set from 1 to 9.
3 – max. time [sec] among button presses [range 1-9]
- switch closing – if time between two next presses is bigger than w
time, the code is not evaluated correctly.
- dialing – if the button, we are pressing, is the first password number
for switch closing, so the choice is delayed by this w time.
4 – time [sec] for which the guard will hang up, before repeated dialing (button
pressing during call or dialing, busy tone detection) [range 1-5]
5 – after finishing the dialing it calculates time (ringing tones). If the number
exceeds time in second, it will hang up [range 10-99]. The dialing is
repeated in case, when the dialing mode of 2 groups is set.
6 – In default is status of DoorPhone signalling acoustically. If signalling makes
problem, so this signalling pick up / hang up prohibited.
7 – In default is status of DoorPhone signalling acoustically. If signalling makes
problem, so this signalling others tones prohibited.
8 – Default value – presetings to the firm settings. After making changes use
the save changes button.
IPDP - installation and operating instructions
25
3.2.4 Direct Dialing – Memories
After making changes use the save changes button.
1 – telephone number up to 16 digits, we want to store. The numbers are the
numbers of the first group or numbers of Day mode. In default setting is
table memoirs empty. While using setting P2P to the memoirs saves IP
address e.g . 192*168*1*250, where „*“ means „.“ , while using SIP proxy
server to the memoirs saves phone number e.g. 117.
2 – telephone number up to 16 digits, we want to store. The numbers are the
numbers of the second group or numbers of Night mode. In default setting
is table memoirs empty. While using setting P2P to the memoirs saves IP
address e.g . 192*168*1*250, where „*“ means „.“ , while using SIP proxy
server to the memoirs saves phone number e.g . 117.
Note: The switchover to Day/Night mode remains set in DoorPhone even
after power supply disconnection.
3 – Default value – presetings to the firm settings. After making changes use
the save changes button.
IPDP - installation and operating instructions
26
4 Technical Parameters
4.1 Electrical Parameters
Parameter
Value
Conditions
Communication interface
Ethernet 10BaseT, 100BaseTx
VoIP protocol supported
SIP
Band width
300Hz – 3400 Hz
Power supply of lighting through,
switches and heating
12Vss ± 2V , 10-12Vst ± 2V
Max. consumption
300mA
12Vss
Max. voltage of switch contact
48V
at I < 1A
Max. current of switch contact
2A
at U < 30 V
Operational temperature
- 20 to + 50°C
4.2 Mechanical dimensions
Type of item
dimensions HxWxD [mm]
IPDPS-01
185 x 99 x 40
IPDPS-02
185 x 99 x 40
IPDPS-01C
185 x 99 x 40
IPDPS-02C
185 x 99 x 40
Guarantee conditions:
The product was shop-checked. The producer guarantees that this product will
keep the features described in these operating instructions in the course of
guarantee provided that the user will be handled with it as described in the
operating manual. The guarantee will be extended by period of possible
guarantee repair.
When claiming in guarantee period please contact your dealer. The producer
only will make the guarantee repairs. Attach the description of claim reason,
proof of purchase and your exact address to the product.
The guarantee does not include:
mechanical, thermal, chemical and other damages caused by user’s
activities
defects caused by natural disasters
defects caused by repair or changes carried out by user or other
unauthorized person
willful damage of product
incorrect use of product caused by other use than specified in
operating manual (e.g. installation, programming)
damages caused during product transport to customer and from
supplier
© JR 2008 version V5.0 X/08
Producer:
Dealer:
Date of sale:
ALPHATECH TECHNOLOGIES s.r.o.
Jeremenkova 88, Praha 4, Czech Republic
www.alphatechtechnologies.cz
ALPHATECH TECHNOLOGIES s.r.o.
Jeremenkova 88
140 00 Praha 4
Czech Republic
VAT: CZ27577350
Company is registered in the Commercial Register
administered by the Municipal
Court in Prague, Section C, Record 116886
Banking details:
Komerční banka, account No. 43-7671450207/0100
IBAN: CZ0801000000437671450207
SWIFT: KOMBCZPPXXX
Loading...