Alpha Omega Instruments 2510 Specifications

SERIES 2500

and 2510

Percent Oxygen Transmitter

Product shown with optional ow meter, needle valve, and coalescing lter

FEATURES BENEFITS

Wide Number of Ranges Measure from <0.1% to 100% Oxygen

Exceptional Speed of Response Responds Instantaneously to Changes in Oxygen

Rugged and Versatile Construction NEMA 4 Housing Withstands Harsh Environments

Economically Priced Save Thousands of Dollars vs Other Methods

Extended Life Sensor Eliminates Frequent Sensor Replacement

Acid Gas Resistant Sensor Eliminates Sample Conditioning for Many Applications

Product Description

The Series 2500 Trace Oxygen Transmitter is a true loop
powered (14-32 VDC) percent oxygen transmitter designed

to provide accurate and dependable percent oxygen mea­surements in a variety of background gases. Measurement
ranges available are from 0-2% to 0-100%. The Series
2500 enclosure is made from durable polycarbonate, and is
rated for NEMA 4 (IP 66) service (may change with the ad­dition of certain optional equipment). A 4-20 mADC output
is provided that can be used with a data logger, recorder,
PLC, DCS, etc. Options include pressure regulators, ow
meters, sample lters, and explosion proof (NEMA 7) hous-

ings.

The Series 2510 Percent Oxygen Transmitter is the AC

powered (115/230 VAC, 50-60 Hz) counterpart to the Series
2500 and is recommended when AC power is available or
preferred.

In addition to the optional equipment mentioned above, the
Series 2510 can be equipped with sample pumps, sensor
heaters, solenoid valves, loss of sample ow signal indica­tion. A 4-20 mADC analog output is provided.

The Series 2500 and Series 2510 Percent Oxygen Trans-

mitters feature an extended life oxygen sensor with EES
(enhanced electrolyte system). This sensor provides excep­tional performance, accuracy, and stability. For applications
where carbon dioxide is present in the sample gas, the
EES retards passivation of the sensor anode by allowing
the products of oxidation to dissolve in the electrolyte. In
effect, the sensor is renewed continuously, resulting in an
increase in sensor life even if exposed to 100% carbon
dioxide. In addition, the enhanced mechanical design of the
sensor ensures longer life, and virtually eliminates leakage
of electrolyte, a nagging (and expensive) problem associ-

ated with sensors that require periodic electrolyte mainte­nance.

Specications

PERFORMANCE

Measurement Ranges in Percent
0-2, 0-5, 0-10, 0-25, 0-50, and 0-100

Accuracy¹: + 1% of full scale.

Linearity: + 1% of full scale.

Response Time: 90% of full scale in less than

20 seconds (typical).

Sensor Type: Long-life Electrochemical

Sensor.

Temperature Compensation: Standard.

Operating Temperature Range: 40° to 104°F (5° to 40°C)

Warranty: Two years for the electronics
and one year for the sensor.

ELECTRICAL

Series 2500 Loop Powered Trace Input power 14-32 VDC
Oxygen Transmitter:

Series 2510 Trace Oxygen Input power 115/230 VAC,
Transmitter: 50-60 Hz, or 24 VDC.

Loop Resistance: 600 ohms @ 24 VDC
(consult factory for other
resistance values)

SAMPLE GAS CHARACTERISTICS

Sample Flow Rate: 1.0 to 2.0 standard cubic feet
per hour (SCFH)

0.5 to 1.0 liters/ minute (LPM)

Sample Gas Pressure 0.1 to 1.5 psig

Limits: (0.007 to 0.1 kg/cm2).

CONSTRUCTION

Enclosure: Polycarbonate, rated
NEMA 4X (IP66) without

optional equipment.

NEMA 7 (explosion proof) optional.

Dimensions: 6.5 in. (165.1 mm) height

7.0 in. (177.8 mm) width

3.9 in.(99.06 mm) depth.
Note: All dimensions are without

optional equipment

Gas Connections: Quick connect 1/4” OD for plastic

tubing or stainless steel compression

ttings for installations with metal

sample lines.

1

Stated at constant temperature and pressure.

40 Albion Road, Suite 100, Lincoln, RI 02865

Tel: [phone], 800.262.5977 Fax: [phone]

Email: [e-mail] Web: aoi-corp.com

Alpha Omega Instruments Accepts VISA, Mastercard, and AMEX