802.16e Mini-card Module
Manual v1.00
Product Model Name: WMX-MC01
Version: 0.1
2008/09/12
This document contains confidential proprietary information and is the property of Alpha Networks Corporation. The
contents of this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks
Corporation.
Company Confidential
Alpha Networks Proprietary and Confidential Information
Contents
1.0 SCOPE....................................................................................................................................................................1
1.1 DOCUMENT...........................................................................................................................................................1
1.2 PRODUCT FEATURES..............................................................................................................................................1
2.0 REQUIREMENTS.................................................................................................................................................1
2.1 FUNCTIONAL BLOCK DIAGRAM ..............................................................................................................................1
2.2 GENERAL REQUIREMENTS......................................................................................................................................1
2.2 GENERAL REQUIREMENTS......................................................................................................................................2
2.2.1 IEEE 802.16e Section....................................................................................................................................2
2.2.2 General Section.............................................................................................................................................2
2.3 COMPATIBILITY REQUIREMENTS.............................................................................................................................3
2.4 REGULATORY REQUIREMENTS................................................................................................................................3
2.5 REQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND QUALITY..........................................................................3
2.6 ENVIRONMENTAL REQUIREMENTS..........................................................................................................................3
Company Confidential
Alpha Networks Proprietary and Confidential Information
ii
1.0 Scope
1.1 Document
This document is to specify the product requirements for 802.16e Mini-Card Module. This Card is based on
Sequans
1130/1140 chipset that complied with IEEE 802.16e standard at 2.5GHz band.
1.2 Product Features
Ÿ
Ÿ
2.0 Requirements
The following sections identify the detailed requirements of the 802.16e Mini-Card Module.
2.1 Functional Block Diagram
Pin 3
Pin 5
Pin 7
Expresscard connector
Pin 22
MII I/F
USB I/F
RFDATA7
Network LED
RFDATA6
IDL_EN
RFDATA1 SPI_
ADDR_BYTE_SEL
PERST#
Reset
IC
UART
JTAG
AND
12MHz
`
`
32.768KHz
USB
port
MAC/BB
SQN1130
SDRAM
MT48H8M16LF
128 M Bit
A[12:0]
D[15:0]
Internal
Logic
40MHz CLK
PLL
Serial Flash
M25P64
64Mbit
TxA/IQ
TxB/IQ
RxA/IQ
RxB/IQ
40MHz
Oscillator
`
Transceiver
SQN1140
Serial
EEPROM
AT25256A
Tx1P
Tx1N
Rx1P
Rx1N
Tx2P
Tx2N
Rx2P
Rx2N
Balun
Balun
Balun
Balun
PA
PA
LPF
LPF
SPDT
HWS
466
SPDT
HWS
466
IPEX
Connector
Tx0
IPEX
Connector
Tx1
Company Confidential
Alpha Networks Proprietary and Confidential Information
1
2.2 General Requirements
2.2.1 IEEE 802.16e Section
# Feature Detailed Description
2.2.1.1 Standard
2.2.1.2 Radio and
Modulation
Schemes
2.2.1.3 Operating
Frequency
2.2.1.4 Channel Numbers
2.2.1.5 Duplexing Modes
2.2.1.6 Channel Bandwidth
2.2.1.7 Transmitter Output
Power at each
Antenna Connector
2.2.1.8 Receiver Sensitivity
at each Antenna
Connector
Company Confidential
IEEE 802.16e
Ÿ
QPSK, 16QAM, 64QAM, OFDMA
Ÿ
2.496GHz to 2.69GHz for licensed band
Ÿ
Depends on the limitation of country regulatory
Ÿ
TDD
Ÿ
For profile 3A, support 5MHz and 10MHz bandwidth
Ÿ
Typical RF Output Power (Tolerance +-2dB) at each modulation type and
at room Temp. 25degree C and 4.2V
23 dBm at 16QAM
Ÿ
Ÿ Typical Sensitivity for 5MHz Bandwidth (AWGN) at which Bit
Error Rate = 10-6 and at room Temp.
Ÿ PUSC CTC-QPSK -1/2 -91.5
Ÿ PUSC CTC-QPSK -3/4 -88.1
Ÿ PUSC CTC-16QAM-1/2 -85.8
Ÿ PUSC CTC-16QAM-3/4 -81.7
Ÿ PUSC CTC-64QAM-1/2 -80.6
Ÿ PUSC CTC-64QAM-2/3 -77.5
Ÿ PUSC CTC-64QAM-3/4 -76.4
Ÿ PUSC CTC-64QAM-5/6 -74.5
Ÿ FUSC CTC-QPSK -1/2 -91.4
Ÿ FUSC CTC-QPSK -3/4 -88.0
Ÿ FUSC CTC-16QAM-1/2 -85.7
Ÿ FUSC CTC-16QAM-3/4 -81.6
Ÿ FUSC CTC-64QAM-1/2 -80.5
Ÿ FUSC CTC-64QAM-2/3 -77.4
Ÿ FUSC CTC-64QAM-3/4 -76.3
Ÿ FUSC CTC-64QAM-5/6 -74.4
Ÿ Typical Sensitivity for 10MHz Bandwidth (AWGN) at which Bit
Error Rate = 10-6 and at room Temp.
Ÿ PUSC CTC-QPSK -1/2 -88.5
Ÿ PUSC CTC-QPSK -3/4 -85.1
Ÿ PUSC CTC-16QAM-1/2 -82.8
Ÿ PUSC CTC-16QAM-3/4 -78.7
Ÿ PUSC CTC-64QAM-1/2 -77.6
Ÿ PUSC CTC-64QAM-2/3 -74.5
Ÿ PUSC CTC-64QAM-3/4 -73.4
Ÿ PUSC CTC-64QAM-5/6 -71.5
Ÿ FUSC CTC-QPSK -1/2 -88.4
Ÿ FUSC CTC-QPSK -3/4 -85.0
Ÿ FUSC CTC-16QAM-1/2 -82.7
Ÿ FUSC CTC-16QAM-3/4 -78.6
Ÿ FUSC CTC-64QAM-1/2 -77.5
Ÿ FUSC CTC-64QAM-2/3 -74.4
Ÿ FUSC CTC-64QAM-3/4 -73.3
Ÿ FUSC CTC-64QAM-5/6 -71.4
2.2.2 General Section
# Feature Detailed Description
Alpha Networks Proprietary and Confidential Information
2
2.2.2.1 Interface
2.2.2.2 Antenna Type
2.2.2.3 Wireless
transmission
PHY
2.2.2.4 Operating Voltage
2.2.2.5 Current
Consumption
2.2.2.6 Form Factor
Min-Card with USB2.0 I/F and MII I/F ( MII mac mode only )
Ÿ
U.F.L &
Ÿ
Support 2X2 MIMO
Ÿ
3.3 VDC +/- 5%
Ÿ
< TBD
Ÿ
Non-standard size ( 66 X 30 mm )
Ÿ
SMA Plug Reverse compatible connector
2.3 Compatibility Requirements
This device passes the following compatibility requirements.
# Feature Detailed Description
2.3.1 WiMax
2.3.2 Physical Layer and
Functionality
Conformable with WiMAX Forum Wave II certification
Ÿ
Meet Alpha Networks Engineering Test Plan and Test Report
Ÿ
2.4 Regulatory Requirements
# Feature Detailed Description
2.4.1
TBD
Ÿ
2.5 Requirements of Reliability, Maintainability and Quality
# Feature Detailed Description
2.5.1 MTBF
2.5.2 Maintainability
2.5.3 Quality
Mean Time Between Failure > 30,000 hours
Ÿ
There is no scheduled preventive maintenance required
Ÿ
The product quality is followed-up by Alpha Networks factory quality
Ÿ
control system
2.6 Environmental Requirements
# Feature Detailed Description
2.6.1 Operating
Temperature
Conditions
2.6.2 Non-Operating
Temperature
Conditions
2.6.3 Operating
Humidity
conditions
2.6.4 Non-Operating
Humidity
Conditions
Ÿ The product is capable of continuous reliable operation when
operating in ambient temperature of 0 ℃ to 45 ℃.
Neither subassemblies is damaged nor the operational performance is
Ÿ
degraded when restored to the operating temperature after exposing to
storage temperature in the range of –20 ℃ to +75 ℃.
The product is capable of continuous reliable operation when
Ÿ
subjected to relative humidity in the range of 10% and 90% noncondensing.
The product is not damaged nor the performance is degraded after
Ÿ
exposure to relative humidity ranging from 5% to 95% noncondensing
Company Confidential
Alpha Networks Proprietary and Confidential Information
3
4
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 30cm between the radiator &
your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Due to the essential high output power natural of WiMAX device, use of this device with other transmitter
at the same time may exceed the FCC RF exposure limit and such usage must be prohibited (unless such
co-transmission has been approved by FCC in the future).
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 30 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) For all products market in US, OEM has to limit the operation frequencies in 2496MHz – 2690MHz by
supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to
Regulatory Domain change.
4) This module may be used only for a WiMAX user station as regulated in US CFR part 27.50 (h)(2).
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
Company Confidential
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered
Alpha Networks Proprietary and Confidential Information
4
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that
30cm may be maintained between the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains FCC ID: RRK2520090401-1”.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Company Confidential
Alpha Networks Proprietary and Confidential Information
5
Loading...