Alpha Networks WMPN09H user manual

User Manual

For

Wireless Mini PCI Adapter

(Atheros AR9223)

Model Number : WMP-N09H

Revision: 1.3

This document contains confidential proprietary information and is the property of Alpha Networks Inc.. The contents of
this document may not be disclosed to unauthorized persons without the written consent of Alpha Networks Inc..

Alpha Networks Proprietary and Confidential Information

Operation Manual

Test Utility Installation:

1. Unzip “ ART_v0_7_b27_ar928xALL

2. The utility must run on WinXP or Vista
Hardware Installation:

Before insert the card, please execute the below instruction at first!!

1. WinXP OS:

Enter in the directory: C:\ v0_7_b27_ar928xALL \art_driver\bin\xp

Execute the uninst_old_drv.bat:
Execute the inst_new_drv_xp.bat

Vista OS:

Enter in the directory: C:\ v0_7_b27_ar928xALL \art_driver\bin\Vista
Execute the uninst_old_drv.bat:
Execute the inst_new_drv_xp.bat

2. Insert the card, then install the driver, the driver is located at

WinXP OS and Vista OS:

C:\ v0_7_b27_ar928xALL \art\bin

Configuration:

1. Enter the DOS command mode, then change the directory to:
C:\ v0_7_b27_ar928xALL \art\bin

2. Input the instruction: art \id=2091

Then press enter.

ART TEST MODE:

1. Once utility is executed, a menu with test options will appear. To run a test, press the character

key that is assigned to the test option.
For example, press “c” to run the continuous transmit test, or press “r ” to run the continuous

receive test.

Alpha Networks Proprietary and Confidential Information

3

For example: press “h” to choice single chain or both chains in test mode.

Alpha Networks Proprietary and Confidential Information

4

2. Continuous Transmit Options:

a. Before the continuous Transmit test, need to press “e” first
The command will load the calibrate data to the EPROM, and then the card can transmit the

target power.

b. The channel frequency, data rate and output power could be changed in continuous transmit

options. Press “c” to increase the output power, 11g Power ( data rate 6Mbps ) is 18dBm, 11b
Power is 17dBm, press ESC to return to the main Test Options menu when finished.

3. Continuous Receive Options

Continuous receiver option will put the radio into receive mode to allow for radio measurement.
Press ESC to return to the main Test Option menu when finished.

Alpha Networks Proprietary and Confidential Information

5